SB530

SB520-SB560 5A Schottky Barrier Rectifiers PRODUCT SUMMARY Voltage ratings available from 20 Volts to 60 Volts FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Low power loss, high efficiency For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection MECHANICAL DATA Case: JEDEC DO-201AD molded plastic body Terminals: matte-Sn plated axial leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C for 10 seconds with 0.375" (9.5mm) lead length, 5lbs (2.3kg) tension Polarity: color band denotes cathode end Mounting position: Any Weight: 0.041 ounce, 1.15 grams Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length (See Fig.1) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at rated TL Max. instantaneous forward voltage at 5.0A (Note 1) Maximum instantaneous reverse current at rated DC blocking voltage (Note 1) Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range @TA= 25oC @TA=100oC Symbols VRRM VRMS V DC IF(AV) IFSM VF IR RθJA RθJL Tj TSTG S B 520 20 14 20 S B 530 30 21 30 S B 540 40 28 40 5.0 S B 550 50 35 50 S B 560 60 42 60 Units Volts Volts Volts Amps 150.0 0.55 0.5 50 25 8 -55 to +125 -55 to +150 -55 to +150 25 0.67 Amps Volts mA o C/W o C C o Notes: 1. Pulse test: 300us pulse width, 1% duty cycle 2. Thermal resistance junction to lead vertical P.C.B. mounted, 0.375" (9.5mm) lead length 11/28/2006 Rev.4.01 www.SiliconStandard.com 1 of 2 SB520-SB560 RATINGS AND CHARACTERISTIC CURVES (T A = 25°C unless otherwise noted) Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 11/28/2006 Rev.4.01 www.SiliconStandard.com 2 of 2