1N7067SMS

PRELIMINARY Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 1N7066 thru 1N7068 and 1N7066SMS thru 1N7068SMS 10 AMP 50 ─ 150 VOLTS 30 ns HYPERFAST RECOVERY RECTIFIER FEATURES: Designer’s Data Sheet Part Number/Ordering Information 1/ 1N70 __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab • • • • • • • Voltage/Family 66= 50V 67 = 100V 68 = 150V • • • Hyper Fast Reverse Recovery: 30ns Maximum4/ High Surge Current: 325 A Maximum Hermetically Sealed Low Forward Voltage Drop .95 @10A Void Free Chip Construction Solid Silver Leads Available in Axial & Square Tab Versions TX, TXV, and S-Level Screening Available 2/ Axial Lead Higher Current Replacements for: 1N5807, 1N5809, 1N5811 Possible SMS Replacements for Stud Mount : 1N5812, 1N5814, 1N5816 MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage 1N7066 1N7067 1N7068 SYMBOL VRRM VRWM VR IO IFSM TJ and TSTG RθJL RθJE VALUE 50 100 150 10 325 -65 to +175 8 4.5 UNIT Volts Average Rectified Forward Current (Axial TL ≤ 55°C; SMS TEC ≤ 100°C ) 5/ Peak Surge Current (8.3 ms pulse, half sine wave, superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Amps Amps °C °C/W Operating & Storage Temperature Thermal Resistance NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 1A, IR = 1A, IRR = 0.1A, TA = 25°C 5/ Operating at higher Io currents may be achieved based on specific application and device mounting if Tj is maintained below 175ºC. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Junction to Lead for Axial, L =.125" Junction to End Tab for Surface Mount Axial Leaded SMS DATA SHEET #: RC0119C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 1N7066 thru 1N7068 and 1N7066SMS thru 1N7068SMS ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS IF = 6.0 Adc , TA = +25°C, 300μs pulse IF = 10 Adc , TA = 25°C, 300μs pulse IF = 20 Adc , TA = 25°C IF = 6 Adc , TA = 125°C IF = 6 Adc , TA = -55°C Rated VR, TA = +25°C, 300μs pulse minimum Rated VR, TA =+100°C, 300μs pulse minimum SYMBOL VF1 VF2 VF3 VF4 VF5 IR1 IR2 CJ trr VALUE MAX UNIT Instantaneous Forward Voltage Drop 0.900 0.950 1.020 0.85 1.05 20 1 80 30 Vdc μA mA pF ns Reverse Leakage Current Junction Capacitance VR = 10 Vdc, f = 1MHz, TA = 25°C Reverse Recovery Time IF = 1A, IR = 1A, IRR = 0.1A, TA = 25°C Package Outlines: DIMENSIONS (inches) DIM. DIMENSIONS (inches) A B C D Minimum .135 .135 .037 1.000 Maximum .165 .155 .042 --- DIM. A B C D Minimum .172 .180 .020 .002 Maximum .180 .220 .028 --- AXIAL SMS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0119C DOC