SDRJFSMS

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR9JF thru SDR9MF and SDRJFSMS thru SDRMFSMS Series 9.0 AMPS 600 ─ 1000 VOLTS 250 ns typical FAST RECOVERY RECTIFIER FEATURES: Designer’s Data Sheet Part Number/Ordering Information 1/ SDR9 __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab ASMS = SMS with .145/.155” End Tab Size Voltage/Family JF = 600V KF = 800V MF = 1000V • • • • • • • • • • Fast Reverse Recovery: 250ns Maximum 4/ PIV to 1000 Volts Hermetically Sealed Low Reverse Leakage Current Single Chip Construction Replaces Larger DO-4 Rectifiers Low Thermal Resistance Available in Axial & Square Tab Versions TX, TXV, and S-Level Screening Available 2/ Ultra Fast and Hyper Fast Recovery Versions Available- Contact Factory MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage SDR9JF & SDR9JFSMS SDR9KF & SDR9KFSMS SDR9MF & SDR9MFSMS SYMBOL VRRM VRWM VR IO IFSM TJ and TSTG RθJL RθJE Axial Leaded VALUE 600 800 1000 9.0 150 -65 to +175 8 4 UNIT Volts Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TA = 25°C ) Peak Surge Current (8.3 ms pulse, half sine wave, superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Amps Amps °C °C/W SMS Operating & Storage Temperature Thermal Resistance NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Junction to Lead for Axial, L =.125" Junction to End Tab for Surface Mount NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0056C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SDR9JF thru SDR9MF and SDRJFSMS thru SDRMFSMS Series ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Instantaneous Forward Voltage Drop IF = 9.0 Adc, 300-500μs pulse Reverse Leakage Current Rated VR, 300μs pulse minimum Junction Capacitance VR = 10 Vdc, f = 1MHz, TA = 25°C Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Package Outlines: DIMENSIONS (inches) DIM. SYMBOL TA = +25°C TA = -55°C TA = +25°C TA =+100°C VF1 VF2 IR1 IR2 CJ trr VALUE MAX UNIT 1.15 1.30 1.0 50 50 250 typ. 325 max. Vdc μA pF ns DIMENSIONS (inches) A B C D Minimum --.210 .037 1.000 Maximum .170 .250 .043 --- DIM. A (SMS) A (ASMS) B C D Minimum .170 .145 .260 .020 .002 Maximum .180 .155 .300 .030 --- AXIAL SMS NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0056C DOC