SER30KE30

Solid State Devices, Inc. 14701 Firestone Blvd. * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SER30KB60 / SER30KE60 Series 30 AMP 300-600 VOLT ULTRAFAST POWER SURFACE MOUNT RECTIFIER FEATURES:  Low Reverse Leakage  Low Forward Voltage Drop  Hermetically Sealed Power Surface Mount Package  TX, TXV, and Space Level Screening Available2/ Designer’s Data Sheet Part Number / Ordering Information 1/ SER30 __ 60 __          L Screening 2/ = None TX = TX Level TXV = TXV Level S = S Level L Voltage L Configuration KB = without lead KE = with lead MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SER30KE30, SER30KB30 SER30KE40, SER30KB40 SER30KE50, SER30KB50 SER30KE60, SER30KB60 Symbol VRRM VRWM VR IO IFSM TOP & Tstg RJC CASE OUTLINE: KE60 Series Value 300 400 500 600 30 400 -55 to +200 1.2 Units Volts Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA = 100oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, Allow Junction to Reach Equilibrium between Pulses, TA = 25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Case CASE OUTLINE: KB60 Series Amps Amps o C o C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0128D DOC Solid State Devices, Inc. 14701 Firestone Blvd. * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SER30KB60 / SER30KE60 Series ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 5 A, 300 sec Pulse) TA = -55oC TA = 25oC TA = 100oC TA = 125oC TA = 150oC TA = -55oC TA = 25oC TA = 100oC TA = 125oC TA = 150oC TA = -55oC TA = 25oC TA = 100oC TA = 125oC TA = 150oC TA = -55oC TA = 25oC TA = 100oC TA = 125oC TA = 150oC TA = -55oC TA = 25oC TA = 100oC TA = 125oC TA = 150oC TA = 25oC TA = 100oC TA = 125oC TA = 150oC VR= 5 V VR = 10 V IF= 0.5 A, IR= 1 A, Irr= 0.25 A IF= 1 A, IR= 1 A, Irr= 0.1 A IF= 10 A, dIF/dt= 45 A/us, Ta= 25 oC IF= 10 A, dIF/dt= 45 A/us, Ta= 25 oC IF= 10 A, dIF/dt= 45 A/us, Ta= 100 oC IF= 10 A, dIF/dt= 45 A/us, Ta= 100 oC IF= 10 A, dIF/dt= 100 A/us, Ta= 25 oC IF= 10 A, dIF/dt= 100 A/us, Ta= 25 oC IF= 1 A Symbol VF1a VF1b VF1c VF1d VF1e VF2a VF2b VF2c VF2d VF2e VF3a VF3b VF3c VF3d VF3e VF4a VF4b VF4c VF4d VF4e VF5a VF5b VF5c VF5d VF5e IR1 IR2 IR3 IR4 CJ trr1 trr2 trr3 IRM3 trr4 IRM4 trr5 IRM5 tfr Vfr Typical 1070 950 760 710 650 1150 1050 860 810 750 1260 1170 1000 950 880 1340 1260 1100 1050 990 1480 1400 1240 1190 1150 0.1 6 25 80 190 140 32 75 46 1.8 115 3.8 45 3.7 60 880 Maximum 1150 975 1400 1250 10 500 250 35 - Unit mVDC Instantaneous Forward Voltage Drop (IF =10 ADC, 300 sec Pulse) mVDC Instantaneous Forward Voltage Drop (IF =20 ADC, 300 sec Pulse) mVDC Instantaneous Forward Voltage Drop (IF =30 ADC, 300 sec Pulse) mVDC Instantaneous Forward Voltage Drop (IF =50 ADC, 300 sec Pulse) mVDC Reverse Leakage Current (Rated VR, 300 sec pulse minimum) uA Junction Capacitance (TA = 25oC, f = 1 MHz) Reverse Recovery pF ns ns ns A ns A ns A ns mV Forward Recovery NOTES: 1/ For ordering information, price, operating curves, and availability – contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0128D DOC