SPD5417SMS

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD5415 thru SPD5420 and SPD5415SMS thru SPD5420SMS 3 AMPS 50 ─ 600 VOLTS 150 – 400 nsec FAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ ││ __ = Not Screened ││ TX = TX Level ││ TXV = TXV ││ S = S Level ││ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family 5415 = 50V 5416 = 100V 5417 = 200V 5418 = 400V 5419 = 500V 5420 = 600V • • • • • • • • • FEATURES: Fast Reverse Recovery (Faster Versions Available) PIV to 600 Volts (Higher Voltages Available) Hermetically Sealed Controlled Avalanche Low Thermal Resistance High Surge Capability Available in Axial & Square Tab Versions Metallurgically Bonded TX, TXV, and S-Level Screening Available 2/ Replacement for: 1N 5415, US thru 1N5420, US • MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current 4/ Peak Surge Current (10 surges of 8.3 msec each at 1 minute intervals superimposed on IO = 0, VRSM = 0, TA = 100°C) SYMBOL SPD5415 SPD5416 SPD5417 SPD5418 SPD5419 SPD5420 TA = 55°C TA = 100°C VALUE 50 100 200 400 500 600 3 2 80 -65 to +175 20 10 UNIT VRRM VRWM VR IO IFSM TJ and TSTG RθJL RθJEC Axial Leaded Volts Amps Amps °C °C/W Operating & Storage Temperature Thermal Resistance NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ These ratings are typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. For 3.0 Amps at TA = 55°C, derate linearly at 22 mA for 55°C ≤ TA ≤ 100°C. For 2.0 Amps at TA = 100°C, derate linearly at 25 mA for 100°C ≤ TA ≤ 175°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount SMS DATA SHEET #: RC0106A DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD5415 thru SPD5420 and SPD5415SMS thru SPD5420SMS ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS Forward Voltage IF = 1.5 Adc IF = 9 Adc, 300 µs Pulse IF = 0.5 Adc, TA = -55°C SPD5415 SPD5416 SPD5417 SPD5418 SPD5419 SPD5420 (Rated VR, TA = 25°C) (SPD5415 thru 5417- Rated VR, TA = 100°C) (SPD5418 thru 5420- Rated VR, TA = 100°C) SYMBOL VF1 VF2 VF3 VALUE MIN MAX UNIT 0.5 0.6 0.5 55 110 220 440 550 660 1.2 1.5 1.4 Vdc Breakdown Voltage (IR = 50 µAdc) V(BR) Vdc Maximum Reverse Leakage Current Junction Capacitance (VR = 4 Vdc, 100KHz ≤ f ≤ 1MHz) Maximum Reverse Recovery Time (IF = 500mA, IR = 1A, IRR = 250mA) NOTES: IR1 IR2 IR3 CJ 1.0 20 30 120 150 250 400 µA pF ns SPD5415 thru SPD5418 SPD5419 SPD5420 trr 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ These ratings are typical for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded. For 3.0 Amps at TA = 55°C, derate linearly at 22 mA for 55°C ≤ TA ≤ 100°C. For 2.0 Amps at TA = 100°C, derate linearly at 25 mA for 100°C ≤ TA ≤ 175°C. Package Outlines: DIMENSIONS (inches) DIM. DIMENSIONS (inches) A B C D Minimum .140 .190 .037 .90 Maximum .180 .260 .042 1.30 DIM. A B C D Minimum .170 .240 .023 .002 Maximum .180 .300 .028 --- AXIAL SMS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0106A DOC