SPMR451-01

PRELIMINARY SPMR451-01 SOLID STATE DEVICES, INC. 14005 Stage Road * Santa Fe Springs, Ca 90670 Phone: (562) 404-4474 * Fax: (562) 404-1773 DESIGNER'S DATA SHEET FEATURES: • Application: Power Input Module for Power Controller. • Fail-Safe Configuration Utilizing Multiple Cell Design. • Low Mechanical Stress Design. • Hermetic Sealed Construction for Aerospace Applications. • Excellent Thermal Management. • Low Forward Voltage (VF). • Voltage Monitor Included for Customer Specified Ratio. • Full Power Screened Hermetic Discretes. • TX, TXV, and S-Level Screening Available. • Consult Factory for Other Configurations and Terminal Styles. MAXIMUM RATINGS CHARACTERISTIC Peak Repetitive Reverse and DC Blocking Voltage, per Cell Average Rectified Forward Current, per Cell (Non-repetitive, t = 8.3 ms Pulse) Peak Surge Current, per Cell (Non-repetitive, t = 8.3 ms Pulse, TJ = 25oC) Operating Temperature Range Storage Temperature Range Thermal Resistance, Junction to Base, per Cell 180 AMPS/600 VOLTS 5 CELLS SRM POWER MODULE ASPM SYMBOL VRM VRWM VR IO IFSM TOP TSTG 1JB VALUE 600 180 750 -55 TO +150 -55 TO +150 0.30 UNIT Volts Amps Amps o C C o o C/W ELECTRICAL SCHEMATIC NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0003A PRELIMINARY SPMR451-01 SOLID STATE DEVICES, INC. 14005 Stage Road * Santa Fe Springs, Ca 90670 Phone: (562) 404-4474 * Fax: (562) 404-1773 ELECTRICAL CHARACTERISTICS @ TJ =25oC, per Cell (Unless Otherwise Specified) PARAMETER Instantaneous Forward Voltage Drop Reverse Leakage (IF = 180A,TB = 25oC) (IF = 180A, TB = -55oC) (VR = 600V, TB = 25oC) (VR = 600V, TB = 100oC) SYMBOL MIN MAX UNIT VF1 VF2 IR1 IR2 RINSUL1 RINSUL2 RSER RMON 1 1 215 4.4 2.5 2.8 100 1000 225 4.6 Volts :Amps GS GS kS kS Insulation Resistance (All terminals to Base @1000V) Insulation Resistance (Between Cells @1000V) Resistance of Series Resistors Resistance of Monitor Resistors PACKAGE OUTLINE: ASPM Tolerances (Unless specified): .XX ".03 .XXX ".010 MIN MAX UNITS