SSR05C100

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR05C120 Series Designer’s Data Sheet Part Number / Ordering Information 1/ SSR05C __ __ __ __ │ │ │ └ Screening __ = Not Screened │││ TX = TX Level TXV = TXV │││ S = S Level │││ │ │ └ Package 2/ G = Cerpack ││ S.5 = SMD.5 ││ GL = Leaded Cerpack │ └ Configuration │ └ Voltage 100 = 1000 V 120 = 1200 V 5 A / 1200 V Schottky Silicon Carbide Rectifier FEATURES: • • • • • • • 1200 Volt Silicon Carbide Schottky Rectifier Average Output Current 5 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. Consult Factory. MAXIMUM RATINGS Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current o (8.3 ms Pulse, Half Sine Wave, TA = 25 C) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) CERPACK (G) Drawing# 60-0149-366 2/ Symbol SSR05C100 SSR05C120 VRRM VR IO IFSM T OP & Tstg TJ RθJC SMD .5 (S.5) Drawing# 60-0149-507 2/ Value 1000 1200 5 30 -55 to +250 -55 to +250 3.0 2/ Units Volts Amps Amps o o o C C C/W LEADED CERPACK (GL) Drawing# 60-0149-366-1 T AB SIZE =0.250W x 0.360L x 0.005” Thick NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0030F DOC SSR05C120 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Instantaneous Forward Voltage Drop (TA=25ºC, 300 - 500 μsec pulse) Instantaneous Forward Voltage Drop (300 - 500 μsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 150ºC, 300 μsec pulse minimum) Junction Capacitance o (VR = 10V, f = 1MHz, TA = 25 C) NOTES: * Pulse Test: Pulse Width = 300 μsec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ For Package Outlines Contact Factory. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC Symbol IF = 2.0 A IF = 5.0 A TA= -55ºC, IF = 5 A TA= 150 ºC, IF = 5 A Min –– –– –– –– –– –– –– Typ 1.21 1.65 1.46 2.60 20 100 280 Max 1.30 1.75 1.50 2.80 250 1000 320 Units VDC VDC μA μA pF VF1 VF2 VF4 VF5 IR1 IR2 CJ PIN ASSIGNMENT Package Cerpack (G) SMD.5 (S.5) Cerpack Leaded (GL) Pin 1 Anode Cathode Anode Pin 2 Anode Anode Anode Pin 3 Cathode Anode Cathode Available Part Numbers: SSR05C100G, SSR05C100GL, SSR05C100S.5 SSR05C120G, SSR05C120GL, SSR05C120S.5 Package Outline: CERPACK Package Outline: SMD.5 Package Outline: LEADED CERPACK NOTE: A ll specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0030F DOC