SSR2010CT-3

Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR2010CT/3 20 AMPS 100 VOLTS POSITIVE CENTERTAP SCHOTTKY RECTIFIER TO-3 Designer’s Data Sheet FEATURES: PIV: 100 Volts Low Forward Voltage Drop Low Reverse Leakage Hermetically Sealed Package Guard Ring for Overvoltage Protection Available in Isolated and Non-isolated versions Eutectic Die Attach 175°C Operating Temperature Also Available in the following Configurations: Common Anode: SSR2010CA/3 Doubler: SSR1010D/3 TX, TXV, and Space Level Screening Available • • • • • • • • • • MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SSR2010CT/3 Symbol VRRM VRWM VR IO IFSM TOP & Tstg RθJC Value 100 20 300 -65 to +175 1.2 Units Volts Amps Amps ° ° Average Rectified Forward Current 1/ (Resistive Load, 60 Hz, Sine Wave, TA=25°C) Peak Surge Current 1/ (8.3 ms Pulse, Half Sine Wave Superimposed on IO, allow junction to reach equilibrium between pulses, TA=25°C) Operating and Storage Temperature Maximum Thermal Resistance 1/ Junction to Case Notes: 1/ Both Legs Tied Together. C C/W NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0071C DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR2010CT/3 ELECTRICAL CHARACTERISTICS (Per Leg) Instantaneous Forward Voltage Drop (TA = 25°C, Pulse) Instantaneous Forward Voltage Drop (IF = 5 Amps, TA = -55°C, Pulse) Reverse Leakage Current (Rated VR, TA = 25°C, Pulse) Reverse Leakage Current (Rated VR, TA = 100°C, Pulse) Junction Capacitance (VR =10 VDC, TA = 25°C, f = 1 MHz) CASE OUTLINE: IF = 3 Amps IF = 5 Amps IF = 10 Amps Symbol VF1 VF2 VF3 VF4 IR1 IR2 CJ Max 0.7 0.72 0.80 0.85 100 5 400 Unit Volts Volts µA mA pF TO-3 PIN OUT: SSR2010CT/3 (Common Cathode) CASE: CATHODE PIN 1: ANODE 1 PIN 2: ANODE 2 PIN OUT: SSR2010CA/3 (Common Anode) CASE: ANODE PIN 1: CATHODE 1 PIN 2: CATHODE 2 PIN OUT: SSR1010D/3 (Doubler) CASE: AC PIN 1: ANODE PIN 2: CATHODE NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0071C DOC