SK13

SHANGHAI SUNRISE ELECTRONICS CO., LTD. SK12 THRU SK16 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 20 TO 60V CURRENT: 1.0A FEATURES • Ideal for surface mount pick and place application • Low profile package • Low power loss, high efficiency • High current capability,low VF • High surge capability • Open junction chip,silastic passivated • High temperature soldering guaranteed: 260oC/10sec/at terminal TECHNICAL SPECIFICATION DSMA/DO-214AC B A I D F G H C MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: Molded with UL-94 Class V-O recognized flame retardant epoxy • Polarity: Color band denotes cathode A B D C .177(4.50) .075(1.90) .012(0.305) MAX. .110(2.79) .157(3.99) .052(1.32) .006(0.152) MIN. .100(2.54) E F G H I MAX. .208(5.28) .090(2.29) .008(0.203) .060(1.52) .035(0.88) MIN. .194(4.93) .078(1.98) .004(0.102) .030(0.76) .027(0.68) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL SK12 SK13 SK14 SK15 SK16 UNITS V V V A A V mA mA pF o VRRM Maximum Repetitive Peak Reverse Voltage 20 30 40 50 60 VRMS Maximum RMS Voltage 14 21 28 35 42 VDC Maximum DC Blocking Voltage 20 30 40 50 60 Maximum Average Forward Rectified Current IF(AV) 1.0 (TL=110oC) Peak Forward Surge Current (8.3ms single IFSM 30 half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage VF 0.5 0.7 (at rated forward current) 0.5 Maximum DC Reverse Current Ta=25oC IR o 10.0 (at rated DC blocking voltage) Ta=100 C 110 CJ Typical Junction Capacitance (Note 1) 20 Rθ(ja) Typical Thermal Resistance (Note 2) -65 to +150 TSTG,TJ Storage and Operation Junction Temperature Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area C/W o C http://www.sse-diode.com