BRPG1204W-TR

1204W Series Bi-color Type (3.0 X 2.5 mm) Features Package Bi-Color Type(3.0 x 2.0mm), Milky White resin Product features Outer Dimension 3.0 x 2.5 x 1.5mm ( L x W x H ) Temperature range Storage Temperature : -40℃～100℃ Operating Temperature : -30℃～85℃ Lead–free soldering compatible RoHS compliant Dominant wavelength Green Yellow Green Red : 558nm(BG),567nm(PG) : 572nm(PY) : 647nm(BR) Half Intensity Angle BG,PG,PY BR :θx = 100 deg., θy = 88 deg. :θx = 80 deg., θy = 80 deg. Die materials BG,PG,PY BR : GaP : GaAlAs Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering and manual soldering Taping and reel 2,500pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm ESD More than 2kV(HBM) Recommended Applications Communication Machine, Electric Household Appliances, OA/FA, Other General Applications 2007.8.31 Page 1 1204W Series Bi-color Type (3.0 X 2.5 mm) Color and Luminous Intensity Part No. Die Name Material Emitted Color BG GaP Green BR GaAlAs Red PG GaP Green BR GaAlAs Red PY GaP Yellow Green BR GaAlAs Red BRBG1204W BRPG1204W BRPY1204W 2005.8.26 (Ta=25℃) Lens Color Water Clear Water Clear Water Clear Dominant Wavelength Luminous Intensity λd (nm) Iv (mcd) TYP. IF MIN. TYP. IF 558 20 0.9 4.8 20 647 20 6 33.6 20 567 20 3 12 20 647 20 6 33.6 20 572 20 6 24 20 647 20 6 33.6 20 Page 2 1204W Series Bi-color Type (3.0 X 2.5 mm) Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current (Ta=25℃) Absolute Maximum Ratings Unit BG PG PY BR Pd 75 75 75 75 mW IF 30 30 30 30 mA IFRM 70 70 70 70 mA ⊿IF 0.42 0.42 0.42 0.42 mA/℃ ⊿IFRM 0.93 0.93 0.93 0.93 mA/℃ Reverse Voltage VR 4 4 4 4 V Operating Temperature T opr -30～+85 ℃ Storage Temperature Tstg -40～+ 100 ℃ Pulse Forward Current ※1 Derating (Ta=25℃ or higher) ※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20. ※ The ratings specified above are under the condition that only one diode is lit. 50% Max. of each rating shall be applied when two diodes are lit simultaneously. 2007.8.31 Page 3 1204W Series Bi-color Type (3.0 X 2.5 mm) Electro-Optical Characteristics Ite m F orwa rd Volta g e Conditions IF =20mA (Ta=25℃) Cha ra cte ristics S ymbol BG PG PY BR T YP . 2.1 2.1 2.1 1.7 MAX . 2.5 2.5 2.5 2.0 VF Unit V Re ve rse Curre nt V R =4V IR MAX . 100 100 100 100 μA P e a k Wa ve le ngth IF =20mA λp T YP . 555 560 570 660 nm IF =20mA λd T YP . 558 567 572 647 nm IF =20mA ⊿λ T YP . 30 30 30 30 nm IF =20mA 2θ 1/2 T YP . Domina nt Wa ve le ng th S pe ctra l L ine Ha lf Width Ha lf Inte nsity Angle 2005.8.26 100(θ x )100(θ x )100(θ x ) 80(θ x ) de g . 88(θ y) 88(θ y) 88(θ y) 80(θ y) Page 4 1204W Series Bi-color Type (3.0 X 2.5 mm) Technical Data(BRBG) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2005.8.26 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 5 1204W Series Bi-color Type (3.0 X 2.5 mm) Technical Data(BRBG) Derating Ambient Temperature vs. Relative Intensity Condition : IF=20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current IF peak Max./IF DC MAX. Power Dissipation : Pd (mW) Condition : Ta = 25℃ Ambient Temperature : Ta(℃) 2005.8.26 Pulse Width : tw (μs) Page 6 1204W Series Bi-color Type (3.0 X 2.5 mm) Technical Data(BRPG) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2005.8.26 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 7 1204W Series Bi-color Type (3.0 X 2.5 mm) Technical Data(BRPG) Derating Ambient Temperature vs. Relative Intensity Condition : IF=20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current IF peak Max./IF DC MAX. Power Dissipation : Pd (mW) Condition : Ta = 25℃ Ambient Temperature : Ta(℃) 2005.8.26 Pulse Width : tw (μs) Page 8 1204W Series Bi-color Type (3.0 X 2.5 mm) Technical Data(BRPY) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Forward Voltage VF(V) 2005.8.26 Condition : Ta = 25℃ Relative Intensity Forward Current IF(mA) Condition : Ta = 25℃ Forward Current IF(mA) Page 9 1204W Series Bi-color Type (3.0 X 2.5 mm) Technical Data(BRPY) Derating Ambient Temperature vs. Relative Intensity Condition : IF=20mA Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current IF peak Max./IF DC MAX. Power Dissipation : Pd (mW) Condition : Ta = 25℃ Ambient Temperature : Ta(℃) 2005.8.26 Pulse Width : tw (μs) Page 10 1204W Series Bi-color Type (3.0 X 2.5 mm) Package Dimensions (Unit: mm) Weight: (13.0)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity : 2,500pcs/ reel (standard) 2007.10.12 Page 11 1204W Series Bi-color Type (3.0 X 2.5 mm) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2010.7.31 350 ℃ 3 s 1 time (MAX.) (MAX.) (MAX.) Page 12 1204W Series Bi-color Type (3.0 X 2.5 mm) Reliability Testing Result Reliability Testing Result Room Temp. Operating Life Applicable Standard EIAJ ED4701/100(101) Resistance to Soldering Heat EIAJ ED4701/300(301) Temperature Cycling EIAJ ED4701/100(105) Wet High Temp. Storage Life High Temp. Storage Life Low Temp. Storage Life Vibration, Variable Frequency EIAJ ED4701/100(103) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/400(403) Testing Conditions Duration Ta = 25℃, IF = Maxium Rated Current Failure 1,000 h 0/25 Twice 0/25 5 cycles 0/25 Ta = 60±2℃, RH = 90±5% 1,000 h 0/25 Ta = Maximum Rated Storage Temperature 1,000 h 0/25 Ta = Minimum Rated Storage Temperature 1,000 h 0/25 2h 0/10 Pre-heating : 150～180℃ 120s Max. Operation Heating : 230℃ 40s Max. Peak Temperature : 260℃ Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 2 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction Failure Criteria Items Symbols Luminous Intensity Iv Forward Voltage VF Reverse Current IR Cosmetic Appearance - 2007.8.31 Conditions IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V - Failure criteria Testing Min. Value ＜ Spec. Min. Value x 0.5 Testing Max. Value ≧ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking Page 13 1204W Series Bi-color Type (3.0 X 2.5 mm) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 14