230

2STR2230 Low voltage fast-switching PNP power transistor General features ■ ■ ■ ■ Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Miniature SOT-23 plastic package for surface mounting circuits In compliance with the 2002/93/EC European Directive ■ SOT-23 Description The 2STR2230 is a PNP transistor manufactured using new “PB-HCD” (Power Bipolar High Current Density) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. The complementary NPN is the 2STR1230. Internal schematic diagram Applications ■ ■ ■ ■ ■ LED Motherboard & hard disk drive Mobile equipment Battery charger Voltage regulation Order codes Part Number 2STR2230 Marking 230 Package SOT-23 Packing Tape & reel November 2006 Rev 3 1/9 www.st.com 9 2STR2230 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 5 3 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2/9 2STR2230 Electrical ratings 1 Electrical ratings Table 1. Symbol VCES VCEO VEBO IC ICM Ptot Tstg TJ Absolute maximum rating Parameter Collector-emitter voltage (V CE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Total dissipation at T amb = 25°C Storage temperature Max. operating junction temperature Value -30 -30 -5 -1.5 -3 0.5 -65 to 150 150 Unit V V V A A W °C °C Table 2. Symbol Thermal data Parameter __max Value 250 Unit °C/W Rthj-amb(1) Thermal resistance junction-amb (1) Device mounted on PCB area of 1cm2 3/9 Electrical characteristics 2STR2230 2 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol ICBO IEBO Electrical characteristics Parameter Collector cut-off current (IE =0) Emitter cut-off current (IC =0) Collector-base breakdown voltage (IE = 0) Test Conditions VCB = -30V VEB = -4V Min. Typ. Max. -0.1 -0.1 Unit µA µA V(BR)CBO IC = -100µA -30 V Collector-emitter V(BR)CEO (2) breakdown voltage (IB = 0) V(BR)EBO VCE(sat) (2) Emitter-base breakdown voltage (IC = 0) Collector-emitter saturation voltage Base-emitter saturation voltage IC = -10mA -30 V IE = -100 µA IC = -0.1A IC = -1A IC = -2A IC = -1A IC = -50mA IB = -1mA IB = -100mA IB = -200mA IB = -100mA V CE = -2V V CE = -2V V CE = -2V V CE = -2V V CE = -5V V CB = -10V -5 -0.17 -0.25 -0.42 -0.9 210 170 100 70 100 10 280 560 -0.45 -0.8 -1.25 V V V V V VBE(sat) (2) hFE (2) DC current gain IC = -0.5A IC = -1A IC = -1.5A IC = -0.1A f = 100MHz IE = 0 f = 1MHz IC = -1.5A fT CCBO Transition frequency Collector-base capacitance Resistive load Turn-on time Turn-off time MHz pF ton toff V CC = -10V IB1 = -IB2 = -150mA 74 200 ns ns Note (2) Pulsed duration = 300 µs, duty cycle ≤1.5% 4/9 2STR2230 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. DC current gain Figure 2. Collector-emitter saturation voltage Figure 3. Base-emitter saturation voltage Figure 4. Resistive load switching time Figure 5. Resistive load switching time Figure 6. Capacitance 5/9 Package mechanical data 2STR2230 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 2STR2230 Package mechanical data SOT-23 MECHANICAL DATA mm MIN. A B C D E F G H L M N O 0.85 0.65 1.20 2.80 0.95 1.9 2.1 0.38 0.3 0 0.3 0.09 TYP. MAX. 1.1 0.95 1.4 3 1.05 2.05 2.5 0.48 0.6 0.1 0.65 0.17 MIN. 33.4 25.6 47.2 110.2 37.4 74.8 82.6 14.9 11.8 0 11.8 3.5 mils TYP. MAX. 43.3 37.4 55.1 118 41.3 80.7 98.4 18.8 23.6 3.9 25.6 6.7 DIM. 0044616/B 7/9 Revision history 2STR2230 4 Revision history Table 4. Date 18-Jul-2006 31-Oct-2006 07-Nov-2006 Revision history Revision 1 2 3 Initial release New graphics Changes Maturity changed from preliminary to full. 8/9 2STR2230 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9