74AUP1G04DTR

74AUP1G04 Low power single inverter gate Features ■ High speed: tPD = 4.3 ns (max.) at VCC = 2.3 V ■ Power down protection on inputs and outputs ■ Balanced propagation delays: tPLH ≈ tPHL ■ Operating voltage range: VCC (opr) = 1.2 to 3.6 V ■ Low power dissipation: ICC = 1 µA (max.) at TA = 85 °C ■ Latch-up performance exceeds 300 mA (JESD 78, Class II) ■ ESD performance: – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) u d o DFN6L r P e t e l o bs SOT-665 O ) s ( t c Applications du ■ Mobile phones ■ Personal digital assistants (PDAs) ro P e t e l o s b O Table 1. ) s ( ct Description The 74AUP1G04 is a low voltage CMOS single inverter gate fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.2 to 3.6 V operations and low power and low noise applications. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2kV ESD immunity and transient excess voltage. Device summary Order code Package Packing 74AUPG04DTR DFN6L (1.2 x 1 mm) Tape and reel 74AUPG04GTR SOT-665 (1.6 x 1.6 mm) Tape and reel March 2008 Rev 1 1/18 www.st.com 18 Pin settings 74AUP1G04 1 Pin settings 1.1 Pin connection Figure 1. Pin connection (top through view) NC 1 6 VCC A 2 5 NC GND 3 4 B NC 1 A 2 GND 3 DFN6L du 1 ro 2 2/18 o r P NC Name and function Not connected A 3 GND Ground (0V) 4 4 B Data output 5 - NC Not connected 6 5 VCC Positive supply voltage P e O Symbol 2 3 bs s ( t c SOT pin number 1 t e l o O ) Pin assignment DFN pin number ) s ( ct du 4 o s b Pin description Table 2. VCC B SOT-665 e t e l 1.2 5 Data input CS00092 74AUP1G04 1.3 Pin settings Truth table Figure 2. Truth table A Table 3. B A B L H u d o r P e H Figure 3. Input and output equivalent circuit ) (s Input t c u ESD protection d o r GND P e GND GND L t e l o V CC t e l o ) s ( ct Truth table s b O Overvoltage control Output ESD protection GND GND CS08974 s b O 3/18 Maximum rating 2 74AUP1G04 Maximum rating Stressing the device above the rating listed in the “absolute maximum ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 4. Absolute maximum ratings Symbol Value Unit Supply voltage -0.5 to +4.6 V VI DC input voltage -0.5 to +4.6 V VO DC output voltage (VCC = 0 V) -0.5 to +4.6 V VO DC output voltage (high or low state) -0.5 to VCC + 0.5 V IIK DC input diode current -20 mA IOK DC output diode current -50 mA IO DC output current ±50 mA ICC DC supply current per supply pin ±100 mA IGND DC ground current per supply pin ±100 mA 200 mW -65 to +150 °C 260 °C VCC Power dissipation Tstg Storage temperature ) s ( ct u d o e t e ol s b O t c u Table 5. so Pr Lead temperature (10 sec) d o r operating conditions Recommended P e t e l 2.1 Recommended operating conditions Symbol Value Unit Supply voltage 1.2 to 3.6 V VI Input voltage 0 to VCC V VO Output voltage 0 to VCC V Top Operating temperature -40 to 85 °C VCC = 3.0 to 3.6 V 10 ns/V VCC = 2.3 to 2.7 V 20 ns/V VCC = 1.2 to 1.95 V 100 ns/V VCC dt/dv 4/18 ) (s PD TL b O Parameter Parameter Input rise and fall time 74AUP1G04 Electrical characteristics 3 Electrical characteristics Table 6. DC specifications Symbol VCC (V) Parameter Test condition Value Value 25 °C -40 to 85 °C Min High level input voltage VIH Low level input voltage VIL VOH VOL O Low level output voltage e t e ol bs II High level output voltage Input leakage current Min Max 1.2 to 1.95 0.65 VCC 0.65 VCC 2.0 to 2.7 1.6 1.6 2.75 to 3.6 2.0 2.0 1.2 to 1.95 0.35 VCC 2.0 to 2.7 0.7 2.75 to 3.6 0.8 0.7 P e ro VCC – 0.2 3.0 IOH = -10 mA 2.45 2.3 IOH = -6 mA 1.85 1.8 1.65 IOH = -4 mA 1.30 1.25 1.4 IOH = -2 mA 1.10 1.05 1.2 IOH = -1 mA 1.00 0.95 ) (s s b O t c u ) s ( ct du IOH = -100 µA t e l o V 0.35VCC 1.2 to 3.6 V 0.8 VCC – 0.2 2.4 V 1.2 to 3.6 IO = 100 µA 0.15 0.20 3.0 IO = 10 mA 0.50 0.55 2.3 IO = 6 mA 0.35 0.40 1.65 IO = 4 mA 0.35 0.40 1.4 IO = 2 mA 0.25 0.30 1.2 IO = 1 mA 0.20 0.25 VI = GND to 3.6 ±0.1 ±0.5 µA VI or VO = 0 to 3.6 V ±0.1 ±1.0 µA od Pr Max Unit 0 to 3.6 V Ioff Power off leakage current ICC Quiescent supply current 1.2 to 3.6 VI = VCC or GND 0.1 1 µA ΔICC ICC increment per input 3.3 VI = VCC - 0.6V, IO = 0 80 100 µA 0 5/18 Electrical characteristics Table 7. 74AUP1G04 AC electrical characteristics Test condition Symbol VCC (V) Value Parameter 25 °C Unit -40 to 85 °C CL (pF) Typ 8.0 12.4 1.4 to 1.6 4.2 6.6 3.2 5.1 2.3 to 2.7 2.3 3.1 3.0 to 3.6 1.9 2.5 1.1 to 1.3 8.6 13 1.4 to 1.6 4.6 1.65 to 1.95 5 10 3.5 2.3 to 2.7 2.4 e t e l 3.0 to 3.6 Propagation delay time 2.0 1.1 to 1.3 2.9 ns 2.6 3.7 2.2 3.1 1.1 to 1.3 10.5 16 1.4 to 1.6 5.5 9 4.3 6.7 2.3 to 2.7 3.1 4.3 3.0 to 3.6 2.7 3.8 O ) 15 1.65 to 1.95 30 Capacitive characteristics Value Parameter VCC (V) Test condition TA = 25 °C Min Typ Unit Max 0 VI = 0 or VCC 3 3.6 VI = 0 or VCC 6 Output capacitance 3.6 VI = 0 or VCC 6 pF Power dissipation capacitance 3.6 f = 10 MHz 32 pF CI Input capacitance CO CPD 6/18 3.5 5.7 u d o Symbol 5.3 3.8 o s b s ( t c O Pr 7.5 3.0 to 3.6 o s b 7 5.6 2.3 to 2.7 Table 8. u d o 13.3 1.65 to 1.95 e t e l ) s ( ct 9.1 1.4 to 1.6 Pr Max 1.1 to 1.3 1.65 to 1.95 tPLH, tPHL Min pF 74AUP1G04 4 Test circuit Test circuit Figure 4. Test circuit Open Pulse generator DUT ) s ( ct u d o Table 9. e t e ol Test setting Test O ) Symbol and values for test circuit and waveform 1.2 ± 0.1 V RL VM e t e l VIH O o s b tr = tf Switch Open s ( t c Symbol CL SC11691 bs tPLH, tPHL Table 10. Pr u d o 1.5 ± 0.1 V 5, 10, 15, 30 pF 5, 10, 15, 30 pF Pr VCC 1.8 ± 0.15 V 2.5 ± 0.2 V 3.3 ± 0.3 V 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 500 Ω 500 Ω 500 Ω 500 Ω 500 Ω VCC/2 VCC/2 VCC/2 VCC/2 1.5 VCC VCC VCC VCC VCC ≤ 2 ns ≤ 2 ns ≤ 2 ns ≤ 2 ns ≤ 2 ns RT = ZOUT of pulse generator (typically 50 Ω) 7/18 Test circuit 74AUP1G04 Figure 5. Waveform: propagation delay (f = 1 MHz; 50% duty cycle) tr tf VIH 90% A VM VM 10% tPLH GND tPHL VOH B VM ) s ( ct VM u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 8/18 s b O VOL 74AUP1G04 5 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. Figure 6. DFN6L (1.2 x 1 mm) package outline ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 7899067 9/18 Package mechanical data Table 11. 74AUP1G04 DFN6L (1.2 x 1 mm) package mechanical data Millimeters Symbol Typ Min Max A 0.50 0.45 0.55 A1 0.02 0 0.05 A3 0.127 b 0.20 0.15 0.25 D 1.20 1.15 1.25 E 1 0.95 e 0.40 L 0.35 0.30 L1 0.45 0.40 Figure 7. t e l o ) (s t c u d o r P e t e l o s b O 10/18 du ro P e DFN6L (1.2 x 1 mm) package footprint s b O ) s ( ct 1.05 0.40 0.50 74AUP1G04 Package mechanical data Figure 8. SOT-665 (1.6 x 1.6 mm) package outline bp D ) s ( ct E u d o A r P e Lp He C t e l o t c u ) (s e1 O o s b e d o r P e Table 12. let s b O SOT665 (1.6 x 1.6 mm) mechanical data Symbol Millimeters Typ Min Max A 0.50 0.60 bp 0.17 0.27 c 0.08 0.18 D 1.5 1.7 E 1.1 1.3 He 1.5 1.7 Lp 0.1 0.3 e 1 e1 0.5 11/18 Package mechanical data Figure 9. 74AUP1G04 SOT-665 (1.6 x 1.6 mm) package footprint ) s ( ct u d o r P e t e l o Figure 10. DFN6L (1.2 x 1 mm) carrier tape information ) (s s b O t c u d o r P e t e l o s b O 7875978 12/18 74AUP1G04 Package mechanical data Figure 11. DFN6L (1.2 x 1 mm) reel information drawing (back view) ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 13/18 Package mechanical data 74AUP1G04 Figure 12. DFN6L (1.2 x 1 mm) reel information drawing (front view) ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 14/18 s b O 74AUP1G04 Package mechanical data Figure 13. SOT-665 (1.6 x 1.6 mm) carrier tape information ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r Figure 14. SOT-665 (1.6 x 1.6 mm) reel information P e t e l o s b O 15/18 Package mechanical data Table 13. 74AUP1G04 SOT-665 (1.6 x 1.6 mm) reel description Value(1) R1 R2 R3 eint (at hub) e1 W1 Min 12.8 175 59.5 8.4 1.5 8.4 7.9 Typ 13 180 60 8.4 8.4 9.4 Max 13.2 185 60.5 10 10 W2 14.4 W3 10.9 1. Millimeters. ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 16/18 s b O 74AUP1G04 6 Revision history Revision history Table 14. Document revision history Date Revision 28-Mar-2008 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 17/18 74AUP1G04 ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18