BTA40, BTA41, BTB41
40 A standard TRIACs
Features
■ ■ ■ ■ ■
A2
High current TRIAC Low thermal resistance with clip bonding High commutation capability BTA series UL1557 certified (File ref: 81734) Packages are RoHS (2002/95/EC) compliant
A1 G A2
G A1
Applications
■ ■
On/off function in static relays, heating regulation, induction motor starting circuits Phase control operations in light dimmers, motor speed controllers, and similar
RD91 insulated (BTA40)
A2
Description
A1 A2 A1 G A2 G
Available in high power packages, the BTA/BTB40-41 series is suitable for general purpose AC switching. The BTA series provides an insulated tab (rated at 2500 V rms).
TOP3 insulated (BTA41)
TOP3 (BTB41)
Table 1.
Symbol IT(RMS) VDRM/VRRM IGT
Device summary
Parameter On-state rms current Repetitive peak off-state voltage Triggering gate current BTA40(1) 40 600 and 800 50 BTA41(1) 41 600 and 800 50 BTB41 41 600 and 800 50 Unit A V mA
1. Insulated package
August 2009
Doc ID 7469 Rev 8
1/9
www.st.com 9
Characteristics
BTA40, BTA41, BTB41
1
Table 2.
Symbol IT(RMS)
Characteristics
Absolute maximum ratings
Parameter On-state rms current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25 °C) I²t Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr ≤ 100 ns Non repetitive surge peak off-state voltage Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range TOP3 RD91 / TOP ins. F = 50 Hz F = 60 Hz tp = 10 ms F = 120 Hz tp = 10 ms tp = 20 µs Tj = 125 °C Tj = 25 °C Tj = 125 °C Tj = 125 °C Tc = 95 °C Tc = 80 °C t = 20 ms t = 16.7 ms 400 A 420 1000 50 VDSM/VRSM + 100 8 1 - 40 to + 150 - 40 to + 125 A²s A/µs V A W °C Value 40 Unit A
ITSM I²t dI/dt VDSM/VRSM IGM PG(AV) Tstg Tj
Table 3.
Symbol IGT (1) VGT VGD IH (2) IL dV/dt(2) (dV/dt)c
(2)
Electrical characteristics (Tj = 25 °C, unless otherwise specified)
Parameter I - II - III IV ALL VD = VDRM RL = 3.3 kΩ Tj = 125 °C IT = 500 mA I - III - IV IG = 1.2 IGT VD = 67% VDRM gate open (dI/dt)c = 20 A/ms MAX. II Tj = 125 °C Tj = 125 °C MIN. MIN. 160 500 10 V/µs V/µs ALL MAX. MAX. MIN. MAX. Value 50 100 1.3 0.2 80 70 mA Unit mA V V mA
VD = 12 V
RL = 33 Ω
1. Minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1
2/9
Doc ID 7469 Rev 8
BTA40, BTA41, BTB41 Table 4.
Symbol VT (1) Vt0 Rd
(2) (2)
Characteristics
Static characteristics
Test conditions ITM = 60 A tp = 380 µs Tj = 25 °C Tj = 125 °C Tj = 125 °C Tj = 25 °C Tj = 125 °C MAX. MAX. MAX. MAX. 5 mA Value 1.55 0.85 10 5 Unit V V mΩ µA
Threshold voltage Dynamic resistance VDRM = VRRM
IDRM IRRM
1. Minimum IGT is guaranted at 5% of IGT max. 2. for both polarities of A2 referenced to A1
Table 5.
Symbol Rth(j-c) Rth(j-a)
Thermal resistance
Test conditions RD91 (insulated) / TOP3 insulated Junction to case (AC) TOP3 Junction to ambient TOP3 / TOP3 insulated 0.6 50 °C/W Value 0.9 °C/W Unit
Figure 1.
Maximum power dissipation versus Figure 2. on-state rms current (full cycle)
45 40
On-state rms current versus case temperature (full cycle)
P(W)
50
IT(RMS)(A)
α=180°
BTB41
40
35 30
BTA40 BTA41
30
25 20
20
15
180°
10
IT(RMS)(A)
0 0 5 10 15 20 25 30
α
α
10 5 0
TC(°C)
0 25 50 75 100 125
35
40
Figure 3.
Relative variation of thermal impedance versus pulse duration
Figure 4.
On-state characteristics (maximum values)
K=[Zth/Rth]
1.E+00
Zth(j-c)
ITM(A)
400
Tj max. Vto = 0.85V Rd = 10 mΩ
100
Tj = Tj max.
1.E-01
Zth(j-a) BTA / BTB41 Tj = 25°C.
10
1.E-02
1.E-03 1.E-03 1.E-02 1.E-01
tp(s)
1.E+00 1.E+01 1.E+02 1.E+03
VTM(V)
1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Doc ID 7469 Rev 8
3/9
Characteristics
BTA40, BTA41, BTB41
Figure 5.
Surge peak on-state current versus Figure 6. number of cycles
Non-repetitive surge peak on-state current for a sinusoidal pulse and corresponding value of I2t
2 2
ITSM(A)
450 400 350 300 250 200 150 100 50 0 1 10 100 1000
Repetitive TC=70°C Non repetitive Tj initial=25°C
t=20ms
ITSM(A), I t (A s)
10000
dI/dt limitation: 50A/µs ITSM Tj initial=25 °C Pulse width tp < 10 ms I2t
One cycle
1000
Number of cycles
100 0.01 0.10
tp(ms)
1.00 10.00
Figure 7.
Relative variation of gate trigger, Figure 8. holding and latching current versus junction temperature
2.0 1.8
Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values)
IGT,IH,IL[Tj] / IGT,IH,IL[Tj=25°C]
2.5
(dI/dt)c [(dV/dt)c] / specified (dI/dt)c
2.0
IGT
1.6 1.4
1.5
IH & IL Typical values
1.2 1.0 0.8
1.0
0.5
Tj(°C)
0.0 -40 -20 0 20 40 60 80 100 120 140
0.6 0.4 0.1 1.0
(dV/dt)c (V/µs)
10.0 100.0
Figure 9.
Relative variation of critical rate of decrease of main current versus (dV/dt)c
(dI/dt)c [Tj] / (dI/dt)c [Tj specified]
6 5 4 3 2 1
Tj(°C)
0 0 25 50 75 100 125
4/9
Doc ID 7469 Rev 8
BTA40, BTA41, BTB41
Ordering information scheme
2
Ordering information scheme
Figure 10. Ordering information scheme
BT A 40 - 600 B RG
TRIAC series Insulation A = insulated B = non-insulated Current 40 = 40 A in RD91 Voltage 600 = 600 V 800 = 800 V Sensitivity and type B = 50 mA standard Packing mode RG = Tube Blank = Bulk
Doc ID 7469 Rev 8
5/9
Package information
BTA40, BTA41, BTB41
3
Package information
● ●
Epoxy meets UL94, V0 Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. TOP3 insulated and non-insulated dimensions
Dimensions Ref.
H R B A
Millimeters Min. Max. 4.6 1.55 15.60 0.7 2.9 16.5 21.1 15.5 5.65 3.65 4.17 1.40
Inches Min. 0.173 0.057 0.565 0.020 0.106 0.622 0.815 0.594 0.213 0.134 0.161 0.047 Max. 0.181 0.061 0.614 0.028 0.114 0.650 0.831 0.610 0.222 0.144 0.164 0.055
A B
4.4 1.45 14.35 0.5 2.7 15.8 20.4 15.1 5.4 3.4 4.08 1.20
ØL
K G
C D
F
E F G
P
C
H J
J
J
D E
K ØL P R
4.60 typ.
0.181 typ.
6/9
Doc ID 7469 Rev 8
BTA40, BTA41, BTB41 Table 7. RD91 dimensions
Package information
Dimensions Ref. Millimeters Min.
A2 L2 L1
Inches Min. 1.177 0.531 0.077 0.027 0.157 0.441 0.122 0.067 33° 28° Max. 1.575 1.193 0.867 1.063 0.650 0.945 0.551 0.138 0.118 0.035 0.177 0.535 0.138 0.075 43° 38°
Max. 40.00 30.30 22.00 27.00 16.50 24.00 14.00 3.50 3.00 0.90 4.50 13.60 3.50 1.90 43° 38°
A A1 A2
29.90 13.50 1.95 0.70 4.00 11.20 3.10 1.70 33° 28°
B2 C B1
B B1
C2 A1 C1
B2 C C1
N2
N1
C2
B F
E3 F
E3 I A
I L1 L2 N1 N2
Doc ID 7469 Rev 8
7/9
Ordering information
BTA40, BTA41, BTB41
4
Ordering information
Table 8. Ordering information
Marking BTA40xxxB BTA41xxxB BTB41xxxB Package RD91 TOP3 Ins. TOP3 Weight 20 g 4.5 g 4.5 g Base qty Delivery mode 25 30 30 Bulk Tube Tube
Order code(1) BTA40-xxxB BTA41-xxxBRG BTB41-xxxBRG
1. xxx = voltage
5
Revision history
Table 9.
Date Sep-2003 25-Mar-2005 14-Oct-2005
Document revision history
Revision 5 6 7 Last update. TOP3 delivery mode changed from bulk to tube. Tc values for IT changed in Table 3. ECOPACK statement added. Updated Table 2 to correctly place packages. Updated Figure 2. Table 5 changed to correctly place TOP3. Updated ECOPACK statement. Changes
10-Aug-2009
8
8/9
Doc ID 7469 Rev 8
BTA40, BTA41, BTB41
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 7469 Rev 8
9/9