BULB7216

BULB7216 BUL7216 High voltage fast-switching NPN power transistor Features ■ ■ ■ ■ Low spread of dynamic parameters High voltage capability Minimum lot-to-lot spread for reliable operation Very high switching speed TO-220 3 1 D2PAK 3 1 2 3 12 I2PAK Applications ■ Electronic ballast for fluorescent lighting (277 V push-pull and 347 V half bridge topoligies) Description The devices are manufactured using diffused collector technology to enhance switching speeds and tight hFE while maintaining the wide RBSOA. Figure 1. Internal schematic diagram Table 1. Device summary Marking BUL7216 BULB7216 BULB7216 Package TO-220 I2PAK D2PAK Packaging Tube Tube Tape and reel Order code BUL7216 BULB7216-1 BULB7216T4 November 2007 Rev 2 1/13 www.st.com 13 Contents BULB7216 - BUL7216 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 4 5 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 BULB7216 - BUL7216 Electrical ratings 1 Electrical ratings Table 2. Symbol VCES VCEO VEBO IC ICM IB IBM Ptot Tstg TJ Absolute maximum rating Parameter Collector-emitter voltage (VBE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Base current Base peak current (tP < 5ms) Total dissipation at Tc = 25°C Storage temperature Max. operating junction temperature Value 1600 700 12 3 6 1 2 80 -65 to 150 150 Unit V V V A A A A W °C °C Table 3. Symbol Thermal data Parameter Value 1.56 Unit °C/W Rthj-case Thermal resistance junction - case 3/13 Electrical characteristics BULB7216 - BUL7216 2 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Symbol ICES ICEO ICBO IEBO Electrical characteristics Parameter Collector cut-off current (VBE = 0) Collector cut-off current (IB = 0) Collector cut-off current (IE = 0) Emitter cut-off current (IC = 0) Test conditions VCE =1600 V VCE =1600 V VCE =680 V VCB =1600 V VCB =1600 V VEB =12 V TC = 125 °C Min. Typ. Max. 0.1 0.5 0.1 0.1 0.5 1 Unit mA mA mA mA mA mA TC = 125 °C Collector-emitter V(BR)CEO(1) breakdown voltage (IB = 0) V(BR)EBO(1) Emitter-base breakdown voltage (IC = 0) IC = 1 mA 700 V IE = 1 mA 12 V Collector-emitter V(BR)CES(1) breakdown voltage (VBE = 0) VCE(sat) (1) Collector-emitter saturation voltage IC = 0.1 mA IC = 0.25 A _ IC = 0.5 A _ IC = 0.8 A _ IC = 0.5 A _ IC = 1 A _ IC = 2 A _ IB = 25 mA IB = 50 mA IB = 80 mA IB = 100 mA IB = 100 mA IB = 400 mA 1600 1 1.5 3 1 1.1 1.2 7 16 4 19 18 35 11 V V V V V V V VBE(sat) (1) Base-emitter saturation voltage hFE (1) DC current gain IC = 0.5 A _ VCE = 1 V IC = 0.5 A _ _ VCE = 3 V IC = 2 A _ _ VCE = 5 V IC = 1 A _ _ VCE = 10 V IC = 0.5 A IB1 = 50 mA P.W.= 300 µs L = 2 mH VBE(off) = -5 V VCC = 125 V IB2 = -0.5 A D.C.= 2% C = 1.8 nF td tr ts tf Ear Resistive load Delay time Rise time Storage time Fall time Repetitive avalanche energy 0.3 1.1 0.9 0.35 8 µs µs µs µs mJ 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5% 4/13 BULB7216 - BUL7216 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Derating curve Figure 3. Reverse biased safe operating area Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector - emitter saturation Figure 7. voltage Base - emitter saturation voltage 5/13 Electrical characteristics Figure 8. Resistive load switching time Figure 9. BULB7216 - BUL7216 Resistive load switching time 6/13 BULB7216 - BUL7216 Test circuit 3 Test circuit Figure 10. Energy rating test circuit Figure 11. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 7/13 Package mechanical data BULB7216 - BUL7216 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/13 BULB7216 - BUL7216 Package mechanical data TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 9/13 Package mechanical data BULB7216 - BUL7216 TO-262 (I2PAK) MECHANICAL DATA mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch 10/13 BULB7216 - BUL7216 Package mechanical data TO-263 (D2PAK) MECHANICAL DATA DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0o 4.88 15.00 1.27 1.40 2.40 0.40 8o 0o 10.00 8.50 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.016 8o 4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 8.00 10.40 0.393 0.334 0.208 0.624 0.055 0.068 0.126 mm TYP. MAX. 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 0.409 inch TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 - Weight : 1.38 g (typ.) - The planaty of the slug must be within 30 µm P011P6/G 11/13 Revision history BULB7216 - BUL7216 5 Revision history Table 5. Date 17-Jan-2006 28-Nov-2007 Document revision history Revision 1 2 First release. Added packages D2PAK and I2PAK Changes 12/13 BULB7216 - BUL7216 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 13/13