BYV54V-200

® BYV54V BYV541V HIGH EFFICIENCY FAST RECOVERY RECTIFIER DIODES FEATURES n n n n n n SUITED FOR SMPS VERY LOW FORWARD LOSSES NEGLIGIBLE SWITCHING LOSSES HIGH SURGE CURRENT CAPABILITY HIGH AVALANCHE ENERGY CAPABILITY INSULATED : Insulating voltage = 2500 VRMS Capacitance = 45 pF K2 A2 A2 K1 K1 A1 K2 A1 BYV541V-200 BYV54V-200 DESCRIPTION Dual rectifier suited for switchmode power supply and high frequency DC to DC converters. Packaged in ISOTOPTM this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. ISOTOP (Plastic) ABSOLUTE MAXIMUM RATINGS Symbol IF(RMS) IF(AV) IFSM Tstg Tj RMS forward current Average forward current δ = 0.5 Surge non repetitive forward current Storage and junction temperature range Tc=90° C Parameter Per diode Per diode Value 100 50 1000 - 40 to + 150 - 40 to + 150 Unit A A A °C °C tp=10ms Per diode sinusoidal Symbol VRRM Parameter Repetitive peak reverse voltage BYV54V / BYV541V 200 Unit V ISOTOP is a trademark of STMicroelectronics. May 2000 - Ed : 2E 1/5 BYV54V / BYV541V THERMAL RESISTANCE Symbol Rth (j-c) Junction to case Parameter Per diode Total Rth (c) Coupling Value 1.2 0.85 0.1 °C/W Unit °C/W When the diodes 1 and 2 are used simultaneously : Tj-Tc (diode 1) = P(diode 1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) ELECTRICAL CHARACTERISTICS (Per diode) STATIC CHARACTERISTICS Symbol IR * Tj = 25°C Tj = 100° C VF ** Tj = 125° C Tj = 125° C Tj = 25°C IF = 50 A IF = 100 A IF = 100 A Test Conditions VR = VRRM Min. Typ. Max. 50 5 0.85 1.00 1.15 Unit µA mA V Pulse test : * tp = 5 ms, duty cycle < 2 % ** tp = 380 µs, duty cycle < 2 % RECOVERY CHARACTERISTICS Symbol trr Tj = 25°C Test Conditions IF = 0.5A IR = 1A IF = 1A VR = 30V tfr Tj = 25°C IF = 1A VFR = 1.1 x VF IF = 1A Irr = 0.25A Min. Typ. Max. 40 Unit ns dIF/dt = -50A/µs 60 tr = 5 ns 10 ns VFP Tj = 25°C tr = 5 ns 1.5 V 2/5 BYV54V / BYV541V Fig.1 : Average forward power dissipation versus average forward current. P F(av)(W) =0.1 =0.05 =0.2 =0.5 =1 Fig.2 : Peak current versus form factor. 45 40 35 30 25 20 15 10 5 1000 800 600 T IM(A) T P=30W I M =tp/T tp P=15W P=45W 400 200 P=60W I F(av)(A) =tp/T tp 0 0 5 10 15 20 25 30 35 40 45 50 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Fig.3 : Forward voltage drop versus forward current (maximum values). VFM(V) Fig.4 : Relative variation of thermal impedance junction to case versus pulse duration. 1.0 K Zth(j-c) (tp. ) K= Rth(j-c) =0 . 5 =0 . 2 =0 . 1 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 1 10 IFM(A) Tj=125 oC 0.5 T 0.2 Single pulse 100 500 0.1 1.0E-03 1.0E-02 tp(s) 1.0E-01 =t p/T tp 1. 0E+0 0 Fig.5 : Non repetitive surge peak forward current versus overload duration. IM(A) Fig.6 : Average current versus temperature. (duty cycle : 0.5) IF(av)(A) ambient 400 60 50 Rth(j-a)=Rth(j-c) 300 40 Tc=25 oC Tc=50 o C 200 30 =0.5 20 10 =tp/T T 100 IM t Tc=90 o C =0.5 t(s) 0.01 0.1 1 0 0 tp Tamb(o C) 0 0.001 20 40 60 80 100 120 140 160 3/5 BYV54V / BYV541V Fig.7 : Junction capacitance versus reverse voltage applied (Typical values). Fig.8 : Recovery charges versus dIF/dt. 420 400 380 360 340 320 300 280 260 C(pF) F=1Mhz Tj=25 oC VR(V) 10 100 20 0 240 1 1 20 110 90%CONFIDENCE 1 00 IF=IF(av) Tj=100 OC 90 80 70 60 Tj=25 O C 50 40 30 20 10 dIF/dt(A/us) 0 1 10 QRR(nC) 1 00 Fig.9 : Peak reverse current versus dIF/dt. Fig.10 : Dynamic parameters versus junction temperature. QRR;IRM[Tj]/QRR;IRM[Tj=125oC] 4.0 3.6 90%CONFIDENCE IF=IF(av) 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0.0 20 1 IRM(A) 1.50 Tj=100 O C 1.25 1.00 IRM 0.75 QRR 0.50 Tj=25 O C 0.25 dIF/dt(A/us) 10 100 Tj( oC) 0.00 0 25 50 75 100 125 150 4/5 BYV54V / BYV541V PACKAGE MECHANICAL DATA ISOTOP DIMENSIONS REF. A A1 B C C2 D D1 E E1 E2 G G1 G2 F F1 P P1 S Marking : Type number Cooling method : C Weight : 27 g Epoxy meets UL94, V0 Millimeters Min. Max. 11.80 12.20 8.90 9.10 7.8 8.20 0.75 0.85 1.95 2.05 37.80 38.20 31.50 31.70 25.15 25.50 23.85 24.15 24.80 typ. 14.90 15.10 12.60 12.80 3.50 4.30 4.10 4.30 4.60 5.00 4.00 4.30 4.00 4.40 30.10 30.30 Inches Min. Max. 0.465 0.480 0.350 0.358 0.307 0.323 0.030 0.033 0.077 0.081 1.488 1.504 1.240 1.248 0.990 1.004 0.939 0.951 0.976 typ. 0.587 0.594 0.496 0.504 0.138 0.169 0.161 0.169 0.181 0.197 0.157 0.69 0.157 0.173 1.185 1.193 n n n n Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2000 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5