LM2902HD

LM2902H Low Power Quad Operational Amplifier DATA BRIEF ■ Wide gain bandwidth: 1.3MHz ■ Input common-mode voltage range includes ground ■ Large voltage gain: 100dB ■ Very low supply current/ampli: 375µA ■ Low input bias current: 20nA ■ Low input offset current:s 2nA ■ Wide power supply range: Single supply: +3V to +30V Dual supplies: ±1.5V to ±15V ■ Internal ESD protection: 250V HBM pin to pin mode, 150V MM ) s ( ct D SO-14 (Plastic Micropackage) u d o Description )- This circuit consists of four independent, highgain, internally frequency-compensated amplifiers, which were designed specifically for automotive and industrial control system. It operates from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage. s ( t c u d o ete Pr Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, these circuits can be directly supplied off the standard +5V used in logic systems and will easily provide the required interface electronics without requiring any additional power supply. ol s b O r P e t e l o s b O Wafer form voltage can also swing to ground, even though it is operated from only a single power supply voltage. Pin Connection (top view) 14 Output 4 Output 1 1 Inverting Input 1 2 - - 13 Inverting Input 4 Non-inverting Input 1 3 + + 12 Non-inverting Input 4 11 VCC - VCC + 4 Non-inverting Input 2 5 + + 10 Non-inverting Input 3 6 - - 9 Inverting Input 3 Inverting Input 2 Output 2 7 In the linear mode, the input common-mode voltage range includes ground and the output 8 Output 3 Order Codes Part Number JLM2902H LM2902HD/HDT LM2902HYD/HYDT Temperature Range Package Packaging Marking -40°C, +150°C Wafer SO-14 SO-14 (automotive grade level) Tube or Tape & Reel Tube or Tape & Reel 2902H 2902HY July 2005 For further information contact your local STMicroelectronics sales office. Rev 2 1/2 www.st.com 2 Revision History 1 LM2902H Revision History Date Revision Changes March 2005 1 First release of databrief. July 2005 2 PPAP references inserted in the datasheet see Table : Order Codes on page 1 . ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 2/2