SRIX4K-A4T

SRIX4K 13.56MHz Short Range Contactless Memory Chip With 4096 bit EEPROM, Anti-Collision and Anti-Clone Functions DATA BRIEFING FEATURES SUMMARY s ISO 14443 - 2 Type B Air Interface Compliant s s s s s Figure 1. Delivery Forms ISO 14443 - 3 Type B Frame Format Compliant 13.56MHz Carrier Frequency 847kHz Sub-carrier Frequency 106 Kbit/s Data Transfer France Telecom Proprietary Anti-Clone Function 8 bits Chip_ID based anticollision system 2 Count-Down Binary Counters – 32 bits each – 232 units to be counted-down Antenna (A3) s s s s s s s s s s 64-bit Unique Identifier 4096-bit EEPROM with Write Protect Feature READ BLOCK & WRITE BLOCK (32 Bits) Internal Tuning Capacitor 1million ERASE/WRITE Cycles 10-Year Data Retention Self-Timed Programming Cycle 5ms Typical Programming Time Antenna (A4) Antenna (A5) Wafer July 2003 Complete data available under NDA. 1/5 SRIX4K SUMMARY DESCRIPTION The SRIX4K is a contactless memory, powered by an externally transmitted radio wave. It contains a 4096-bit user EEPROM fabricated with STMicroelectronics CMOS technology. The memory is organised as 128 blocks of 32 bits. The SRIX4K is accessed via the 13.56MHz carrier. Incoming data are demodulated and decoded from the received Amplitude Shift Keying (ASK) modulation signal and outgoing data are generated by load variation using Bit Phase Shift Keying (BPSK) coding of a 847kHz sub-carrier. The received ASK wave is 10% modulated. The Data transfer rate between the SRIX4K and the reader is 106Kbit/s in both reception and emission modes. The SRIX4K follows the ISO 14443 part 2 type B recommendation for the radio-frequency power and signal interface. Figure 2. Logic Diagram SRIX4K Power Supply Regulator 4 Kbit User EEPROM ASK Demodulator BPSK Load Modulator AC1 clone function which allows its authentication. Using the STMicroelectronics single chip coupler, CRX14, it is easy to design a reader with the authentication capability and to build a system with a high level of security. Table 1. Signal Names AC1 AC0 Antenna Coil Antenna Coil The SRIX4K contactless EEPROM can be randomly read and write in block mode. Each block is composed by 32 bits. It offers a set of 10 commands: s READ_BLOCK s s s s s s s s s WRITE_BLOCK INITIATE PCALL16 SLOT_MARKER SELECT COMPLETION RESET_TO_INVENTORY AUTHENTICATE GET_UID AC0 AI06829 The SRIX4K targets short range applications which need secure and re-usable products. The SRIX4K includes an anti-collision mechanism that allows it to detect and select tags present at the same time within range of the reader. The anti-collision is based on a probabilistic scanning method using slot markers. The SRIX4K provides an anti- The SRIX4K memory is organized in three areas, as described in Figure 3. The first area is a resettable OTP (one time programmable) area in which bits can only be switched from 1 to 0. Using a special command, it is possible to erase all bits of this area to 1. The second area provides two 32-bit binary counters which can only be decremented from FFFFFFFFh to 00000000h, and gives a capacity of 4,294,967,296 units per counter. The last area is the EEPROM memory. It is accessible by block of 32 bits and includes an auto-erase cycle during each WRITE_BLOCK command. 2/5 SRIX4K MEMORY MAPPING The SRIX4K is organised as 128 blocks of 32 bits as shown in Figure 3. All blocks are accessible by the READ_BLOCK command. Depending on the Figure 3. SRIX4K Memory Mapping Block Addr 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ... 127 Msb b31 32 bits Block b16 b15 32 bits Boolean Area 32 bits Boolean Area 32 bits Boolean Area 32 bits Boolean Area 32 bits Boolean Area 32 bits binary counter 32 bits binary counter User Area User Area User Area User Area User Area User Area User Area User Area User Area User Area User Area User Area Fixed Chip_ID (Option) EEPROM Lockable EEPROM Count down Counter Resettable OTP bits Lsb b0 write access, they can be updated by the WRITE_BLOCK command. A WRITE_BLOCK updates all the 32 bits of the block. b24 b23 b8 b 7 Description 255 OTP_Lock_Reg ST Reserved System OTP bits UID0 UID1 64 bits UID Area ROM 3/5 SRIX4K PART NUMBERING For a list of available options (speed, package, etc.) or for further information on any aspect of this Table 2. Ordering Information Scheme Example: Device Type SRIX4K Package W4 =180 µm ± 15 µm Unsawn Wafer SBN18= 180µm ± 15 µm Bumped and Sawn Wafer on 8-inch Frame A3T= 38mm x 38mm Copper Antenna on Continuous Tape A3S= 38mm x 38mm Copper Singulated Adhesive Antenna on Tape A4T= 15mm x 15mm Copper Antenna on Continuous Tape A4S= 15mm x 15mm Copper Singulated Adhesive Antenna on Tape A5T= 42mm x 65mm Copper Antenna on Continuous Tape A5S= 42mm x 65mm Copper Singulated Adhesive Antenna on Tape Customer Code XXX = Given by STMicroelectronics SRIX4K – W4 / XXX device, please contact your nearest ST Sales Office. 4/5 SRIX4K Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics All other names are the property of their respective owners © 2003 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. www.st.com 5/5