ST13005

ST13005 High voltage fast-switching NPN power transistor Datasheet − production data Features ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed Applications ■ Electronic ballast for fluorescent lighting ■ Switch mode power supplies 3 1 2 TO-220 Description This device is manufactured using high voltage multi epitaxial planar technology for high switching speeds and high voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining a wide RBSOA. Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking(1) Package Packaging ST13005 13005 A 13005 C 13005 D 13005 E 13005 F TO-220 Tube 1. Product is pre-selected in DC current gain (group A, C, D, E and F). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details. May 2012 This is information on a product in full production. Doc ID 5262 Rev 10 1/12 www.st.com 12 Contents ST13005 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 Doc ID 5262 Rev 10 ST13005 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 4 A Collector peak current (tP < 5 ms) 8 A Base current 2 A IBM Base peak current (tP < 5 ms) 4 A PTOT Total dissipation at Tc ≤25 °C 75 W TSTG Storage temperature - 65 to 150 °C 150 °C Value Unit IC ICM IB TJ Table 3. Symbol Max. operating junction temperature Thermal data Parameter Rthj-case Thermal resistance junction-case max 1.7 °C/W Rthj-amb Thermal resistance junction-amb max 62.5 °C/W Doc ID 5262 Rev 10 3/12 Electrical characteristics 2 ST13005 Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICES Collector cut-off current (VBE = 0) VCE = 700 V VCE = 700 V TC=125 °C 1 5 mA mA IEBO Emitter cut-off current (IC = 0) VEB= 9 V 1 mA VCEO(sus) (1) VCE(sat) (1) VBE(sat) (1) hFE (1)(2) ts tf Collector-emitter I =10 mA sustaining voltage (IB = 0) C Collector-emitter saturation voltage IC = 1 A IC = 2 A IC = 4 A Base-emitter saturation voltage IC = 1 A IC = 2 A DC current gain IC = 1 A Group A Group C Group D Group E Group F IC = 2 A Resistive load Storage time Fall time 400 _ V __ IB = 0.2 A IB = 0.5 A IB = 1 A 0.5 0.6 1 V V V _ _ _IB = 0.2 A IB = 0.5 A 1.2 1.6 V V VCE = 5 V VCE = 5 V IC = 2 A VCC = 125 A IB1= - IB2=0.4 A tp = 30 µs 32 22 27 32 37 40 15 16 21 26 31 8 1.5 3 0.2 µs µs 1. Pulse test: pulse duration = 300 µs, duty cycle ≤2 %. 2. Product is pre-selected in DC current gain (group A, C, D, E and F). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details 4/12 Doc ID 5262 Rev 10 ST13005 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Figure 4. DC current gain (VCE = 1.5 V) Figure 5. DC current gain (VCE = 5 V) Figure 6. Collector-emitter saturation voltage Base-emitter saturation voltage Figure 7. Doc ID 5262 Rev 10 Derating curve 5/12 Electrical characteristics Figure 8. ST13005 Inductive load fall time Figure 10. Resistive load fall time Figure 9. Figure 11. Resistive load storage time Figure 12. Reverse biased safe operating area 6/12 Inductive load storage time Doc ID 5262 Rev 10 ST13005 2.2 Electrical characteristics Test circuits Figure 13. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier Figure 14. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor Doc ID 5262 Rev 10 7/12 Package mechanical data 3 ST13005 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 8/12 Doc ID 5262 Rev 10 ST13005 Package mechanical data Table 5. TO-220 type A mechanical data mm. Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 5262 Rev 10 9/12 Package mechanical data ST13005 Figure 15. TO-220 type A drawing 0015988_typeA_Rev_S 10/12 Doc ID 5262 Rev 10 ST13005 4 Revision history Revision history Table 6. Document revision history Date Revision Changes 21-Jun-2004 6 22-Aug-2007 7 Updated mechanical data according to PCN APM-PWR/07/2804 12-Oct-2007 8 Updated marking in Table 1 15-Feb-2012 9 – – – – 15-May-2012 10 Updated marking in Table 1 and 4 Updated marking in Table 1 Inserted: Table 3 Modified: hFE in Table 4 Updated mechanical data Doc ID 5262 Rev 10 11/12 ST13005 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12 Doc ID 5262 Rev 10