ST202CWR

ST202B, ST202C 5 V powered multi-channel RS-232 drivers and receivers Datasheet - production data Description The ST202B, ST202C is a two-driver, tworeceiver device following EIA/TIA-232 and V.28 communication standards. It is particularly suitable for applications where ± 12 V is not available. The ST202B, ST202C uses a single 5 V power supply and only four external capacitors (0.1 µF). Typical applications are in: portable computers, low power modems, interface translation, and battery-powered RS-232 networks. Features Supply voltage range: 4.5 to 5.5 V Supply current no load (typ.): 1.5 mA Transmitter output voltage swing (typ): ± 9 V Transition slew rate (typ.): 12 V/µs Receiver propagation delay (typ.): 0.1 ms Compatible with MAX202 Receiver input voltage range: ± 30 V Data rate (typ.): 400 kbps/s Operating temperature range: -40 to 85 °C, 0 to 70 °C March 2017 DocID7313 Rev 9 This is information on a product in full production. 1/18 www.st.com Contents ST202B, ST202C Contents 1 Pinout information........................................................................... 3 2 Absolute maximum ratings............................................................. 4 3 4 Electrical characteristics ................................................................ 5 Typical application .......................................................................... 7 5 Typical performance characteristics ............................................. 8 6 Package information ....................................................................... 9 6.1 SO16 package information .............................................................. 10 6.2 SO16L package information ............................................................ 11 6.3 TSSOP16 package information ....................................................... 12 6.4 SO16 tape and reel package information ........................................ 13 6.5 SO16L tape and reel package information ...................................... 14 6.6 TSSOP16 tape and reel package information ................................. 15 7 Ordering information..................................................................... 16 8 Revision history ............................................................................ 17 2/18 DocID7313 Rev 9 ST202B, ST202C 1 Pinout information Pinout information Figure 1: Pin connections (top view) Table 1: Pin description Pin n° Symbol Name and function 1 C1 + Positive terminal for the first charge pump capacitor 2 V+ Doubled voltage terminal 3 C1 - Negative terminal for the first charge pump capacitor 4 C2 + Positive terminal for the second charge pump capacitor 5 C2 - Negative terminal for the second charge pump capacitor 6 V- Inverted voltage terminal 7 T2OUT 8 R2IN 9 R2OUT Second receiver output voltage 10 T2IN Second transmitter input voltage 11 T1IN First transmitter input voltage 12 R1OUT First receiver output voltage 13 R1IN 14 T1OUT First transmitter output voltage 15 GND Ground 16 VCC Supply voltage Second transmitter output voltage Second receiver input voltage First receiver input voltage DocID7313 Rev 9 3/18 Absolute maximum ratings 2 ST202B, ST202C Absolute maximum ratings Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Table 2: Absolute maximum ratings Symbol 4/18 Parameter Value Unit –0.3 to 6 VCC Supply voltage V+ Extra positive voltage V- Extra negative voltage TIN Transmitter input voltage range RIN Receiver input voltage range ± 30 TOUT Transmitter output voltage range ± 15 ROUT Receiver output voltage range –0.3 to (VCC + 0.3) TSCTOUT Short circuit duration on TOUT Infinite DocID7313 Rev 9 (VCC – 0.3) to 13.2 0.3 to -13.2 -0.3 to (VCC + 0.3) V ST202B, ST202C 3 Electrical characteristics Electrical characteristics Table 3: Electrical characteristics, C1 - C4 = 0.1 µF, VCC = 5 V ± 10 %, TA = –40 to 85 °C, unless otherwise specified, typical values are referred to TA = 25 °C Symbol Parameter Test conditions Min. Typ. Max. Unit ISUPPLY VCC power supply current No load — 1.5 4 mA Table 4: Transmitter electrical characteristics, C1 - C4 = 0.1 µF, VCC = 5 V ± 10 %, TA = –40 to 85 °C, unless otherwise specified, typical values are referred to T A = 25 °C Symbol Parameter Test conditions Min. Typ. VTOUT Output voltage swing All transmitter outputs are loaded with 3 kΩ to GND ±5 ±9 ITIL Logic pull-up current TIN = 0 V VTIL Input logic threshold low VTIH Input logic threshold high SRT Transition slew rate TA = 25 °C, VCC = 5 V, RL = 3 to 7 kΩ, CL = 50 to 2500 pF (1) DR Data rate RTOUT 5 0.8 Max. Unit V 40 µA 1.4 V 1.4 2 6 12 30 (2) 200 400 Transmitter output resistance VCC = V+ = V- = 0 V, VOUT = ± 2 V 300 ISC Transmitter output short circuit current One TXOUT to GND ±7 tDT Propagation delay time TTL-CMOS IN to RS-232 OUT, CL = 150 pF (50 % to 50 %) V/µs kbits/s Ω ± 22 1.3 mA 3.5 µs Notes: (1)Measured (2)One from 3 V to -3 V or from -3 V to 3 V transmitter output is loaded with RL = 3 kΩ to 7 kΩ, CL = 50 to 1000 pF DocID7313 Rev 9 5/18 Electrical characteristics ST202B, ST202C Table 5: Receiver electrical characteristics, C1 - C4 = 0.1 µF, VCC = 5 V ± 10 %, TA = –40 to 85 °C, unless otherwise specified, typical values are referred to T A = 25 °C Test conditions Symbol Parameter VRIN Receiver input voltage operating range RRIN RS-232 input resistance VRIL RS-232 input threshold low VRIH RS-232 input threshold high VRIHYS RS-232 input hysteresis VCC = 5 V VROL TTL/CMOS output voltage low IOUT = 3.2 mA (to VCC) VROH TTL/CMOS output voltage high IOUT = 1 mA (to GND) 3.5 VCC - 0.2 To GND 2 10 ISCR Receiver output short circuit current To VCC 10 30 tDR Propagation delay time 6/18 Typ. -30 TA = 25 °C 3 5 0.8 1.3 0.2 Max. Unit 30 V 7 kΩ 1.8 2.4 0.5 1 0.2 0.4 V mA CL = 150 pF (1) Notes: (1)RS-232 Min. in to TTL-CMOS out (from 50 % to 50 %) DocID7313 Rev 9 0.1 0.5 µs ST202B, ST202C 4 Typical application Typical application Figure 2: Application circuit 1. 2. C1-4 can be replaced by the 1 µF capacitors C1-4 can be common or biased capacitors Table 6: Capacitance value (µF) C1 C2 C3 C4 C5 0.1 DocID7313 Rev 9 7/18 Typical performance characteristics 5 ST202B, ST202C Typical performance characteristics Unless otherwise specified T J = 25 °C. Figure 3: Driver voltage transfer characteristics Figure 4: Drive short circuit output current vs temperature Figure 5: Receiver threshold vs supply voltage Figure 6: Driver output capability current vs output voltage Figure 7: Driver short circuit supply current vs. temperature Figure 8: Receiver threshold vs temperature 8/18 DocID7313 Rev 9 ST202B, ST202C 6 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DocID7313 Rev 9 9/18 Package information 6.1 ST202B, ST202C SO16 package information Figure 9: SO16 package outline Table 7: SO16 mechanical data Dimensions Ref Millimeters Min. Typ. A a1 Max Min. Typ. 1.75 0.1 0.25 a2 Max. 0.068 0.004 0.010 1.64 0.063 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° 45 ° D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 e3 10/18 Inches 0.050 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.62 0.024 S 8° 8° DocID7313 Rev 9 ST202B, ST202C 6.2 Package information SO16L package information Figure 10: SO16L package outline Table 8: SO16L mechanical data Dimensions Ref Millimeters Min. Typ. Inches Max Min. Typ. Max. A 2.35 2.65 0.093 0.104 A1 0.1 0.3 0.004 0.012 B 0.33 0.51 0.013 0.02 C 0.23 0.32 0.009 0.013 D 10.1 10.5 0.398 0.413 E 7.4 7.6 0.291 0.299 e 1.27 0.05 H 10 10.65 0.394 0.419 h 0.25 0.75 0.01 0.03 L 0.4 1.27 0.016 0.05 k 0° 8° 0° 8° ddd 0.1 DocID7313 Rev 9 0.004 11/18 Package information 6.3 ST202B, ST202C TSSOP16 package information Figure 11: TSSOP16 package outline Table 9: TSSOP16 mechanical data Dimensions Ref Millimeters Min Typ A Max Min Typ 1.20 A1 0.05 A2 0.80 b Max 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 4.90 5.00 5.10 0.193 0.197 0.201 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e k 0° 0.45 aaa 1.00 0.65 L L1 12/18 Inches 0.60 0.006 0.039 0.041 0.026 8° 0° 0.75 0.018 1.00 8° 0.024 0.030 0.039 0.10 DocID7313 Rev 9 0.004 ST202B, ST202C 6.4 Package information SO16 tape and reel package information Figure 12: SO16 tape and reel package outline 1. Drawing not to scale Table 10: SO16 tape and reel mechanical data Dimensions Ref Millimeters Min. Typ. A Inches Max Min. Typ. 330 C 12.8 D 20.2 N 60 T Ao 6.45 Bo 13.2 Max. 12.992 0.504 0.519 0.795 2.362 — 22.4 — 0.882 6.65 0.254 10.3 10.5 0.406 0.414 Ko 2.1 2.3 0.082 0.090 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 DocID7313 Rev 9 0.262 13/18 Package information 6.5 ST202B, ST202C SO16L tape and reel package information Figure 13: SO16L tape and reel package outline 1. Drawing not to scale Table 11: SO16L tape and reel mechanical data Dimensions Ref Millimeters Min. Typ. A Max Min. Typ. 330 C 12.8 D 20.2 N 60 T 14/18 Inches Ao 10.8 Bo 13.2 Max. 12.992 0.504 0.519 0.795 2.362 — 22.4 — 0.882 11.0 0.425 10.7 10.9 0.421 0.429 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 DocID7313 Rev 9 0.433 ST202B, ST202C 6.6 Package information TSSOP16 tape and reel package information Figure 14: TSSOP16 tape and reel package outline 1. Drawing not to scale Table 12: TSSOP16 tape and reel mechanical data Dimensions Ref Millimeters Min. Typ. A Inches Max Min. Typ. 330 C 12.8 D 20.2 N 60 T Ao 6.7 Bo 13.2 Max. 12.992 0.504 0.519 0.795 2.362 — 22.4 — 0.882 6.9 0.264 5.3 5.5 0.209 0.217 Ko 1.6 1.8 0.063 0.071 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 DocID7313 Rev 9 0.272 15/18 Ordering information 7 ST202B, ST202C Ordering information Table 13: Order codes Order code 16/18 Temperature range Package ST202BDR -40 to 85 °C ST202CDR 0 to 70 °C ST202BTR -40 to 85 °C TSSOP16 (tape and reel) ST202CWR 0 to 70 °C S016L (tape and reel) S016 (tape and reel) DocID7313 Rev 9 Packaging Marking 2500 parts per reel ST202C ST202B ST202B 1000 parts per reel ST202C ST202B, ST202C 8 Revision history Revision history Table 14: Document revision history Date Revision 09-Mar-2006 5 Order codes updated and the document has been reformatted. 16-Jul-2007 6 Device summary updated. 14-Nov-2007 7 Modified: Table 1. 11-Feb-2008 8 Modified: Table 1 on page 1. 9 Cover image: replaced silhouettes "SOP" and "SOP Large" with SO16 and SO16L respectively. Features: updated units of transition slew rate (typ.) from 12 V/ms to 12 V/µs. Moved “Device summary” table to Section 7: "Ordering information" section. Removed obsolete order codes ST202BD and ST202CTR from this table and added "Markings". Section 6.2: "SO16L package information": replaced package outline and mechanical data. Section 6.3: "TSSOP16 package information": added dimensions “L1” and “aaa”, replaced dimension “K” with “k”, and removed BSC from dimension “e”. 03-Mar-2017 Changes DocID7313 Rev 9 17/18 ST202B, ST202C IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2017 STMicroelectronics – All rights reserved 18/18 DocID7313 Rev 9