STBV42G-AP

STBV42 High voltage fast-switching NPN power transistor Features ■ High voltage capability ■ Low spread of dynamic parameters ■ Very high switching speed Applications ■ Compact fluorescent lamps (CFLs) ■ SMPS for battery charger TO-92 TO-92AP Description The device is manufactured using high voltage multi epitaxial planar technology for high switching speeds and high voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Figure 1. Internal schematic diagram The STBV42G and STBV42G-AP are supplied using halogen-free molding compound. Table 1. Device summary Order codes Marking Package Packaging STBV42 BV42 TO-92 Bulk STBV42-AP BV42 TO-92AP Ammopack STBV42G BV42G TO-92 Bulk STBV42G-AP BV42G TO-92AP Ammopack July 2009 Doc ID 7232 Rev 6 1/10 www.st.com 10 Electrical ratings 1 STBV42 Electrical ratings Table 2. Absolute maximum ratings Symbol Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 1 A Collector peak current (tP < 5 ms) 2 A 0.5 A IC ICM IB Base current IBM Base peak current (tP < 5 ms) 1 A PTOT Total dissipation at Tc = 25 °C 1 W Tstg Storage temperature TJ Table 3. Symbol RthJC 2/10 Parameter -65 to 150 °C Max. operating junction temperature 150 Thermal data Parameter Thermal resistance junction-case__________max Doc ID 7232 Rev 6 Value Unit 125 °C/W STBV42 2 Electrical characteristics Electrical characteristics (TC = 25 °C; unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter Test conditions ICES Collector cut-off current (VBE = 0) VCE = 700 V VCE = 700 V IEBO Emitter cut-off current (IC = 0) VEB = 9 V VCEO(sus)(1) Collector-emitter sustaining voltage (IB = 0) IC = 1 mA VCE(sat)(1) Collector-emitter saturation voltage IC = 0.25 A IC = 0.5 A IC = 0.75 A IB = 50 mA IB = 125 mA IB = 250 mA VBE(sat)(1) Base-emitter saturation voltage IC = 0.25 A IC = 0.5 A IB = 50 mA IB = 125 mA hFE(1) DC current gain IC = 0.5 mA IC = 0.4 A IC = 0.8 A VCE = 2 V VCE = 5 V VCE = 5 V tf Inductive Load Fall time Min. Typ. Max. Unit TC = 125 °C 1 5 mA mA 1 mA 400 V 0.2 0.3 0.4 0.5 1 1.5 V V V 1 1.2 V V 12 10 30 5 20 IC = 0.25 A _ Vclamp = 300 V IB1 = -IB2 = 50 mA Figure 9 L = 3 mH 0.3 µs 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Doc ID 7232 Rev 6 Derating curve 3/10 Electrical characteristics 4/10 STBV42 Figure 4. DC current gain (VCE = 3 V) Figure 5. DC current gain (VCE = 5 V) Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage Figure 8. Switching time inductive load Doc ID 7232 Rev 6 STBV42 2.2 Electrical characteristics Test circuit Figure 9. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier Doc ID 7232 Rev 6 5/10 Package mechanical data 3 STBV42 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/10 Doc ID 7232 Rev 6 STBV42 Package mechanical data TO-92 bulk shipment mechanical data mm. DIM. MIN. TYP MAX. A 4.32 4.95 b 0.36 0.51 D 4.45 4.95 E 3.30 3.94 e 2.41 2.67 e1 1.14 1.40 L 12.70 15.49 R 2.16 2.41 S1 0.92 1.52 W 0.41 0.56 V 5o 0102782 D Doc ID 7232 Rev 6 7/10 Package mechanical data STBV42 TO-92 ammopack shipment (suffix”-AP”) mechanical data Dim. A1 T T1 T2 d P0 P2 F1,F2 F3 delta H W W0 W1 W2 H H3 H0 H1 D0 t L I1 delta P Min mm Typ 12.50 5.65 2.44 4.98 -2.00 17.50 5.70 8.50 18.00 6.00 9.00 18.50 0.5 15.50 1 16.00 3.80 4.00 Max 4.80 3.80 1.60 2.30 0.48 12.90 7.05 2.94 5.48 2.00 19.00 6.30 9.25 0.50 20.50 1.5 16.50 25.00 4.20 0.90 11.00 12.70 6.35 2.54 5.08 3.00 -1.00 1.00 0050910S 8/10 Doc ID 7232 Rev 6 STBV42 4 Revision history Revision history Table 5. Document revision history Date Revision Changes 06-Sep-2001 3 Document migration, no content change. 03-Jul-2008 4 Added halogen-free molding compound package. 21-Oct-2008 5 Updated Table 2 on page 2 and Table 4 on page 3. 29-Jul-2009 6 Updated safe operating area Figure 2 on page 3. Doc ID 7232 Rev 6 9/10 STBV42 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 7232 Rev 6