STM32-EMBPI/14
Embedded Pi, triple-play platform for STM32,
Raspberry Pi and Arduino™
Data brief
Features
STM32F103 running at 72 MHz with
128 Kbytes Flash memory and 20 Kbytes RAM
Form factor compatible with both 5 V and 3V3
Arduino™ shields, selectable with jumpers
Hundreds of Arduino™ shields available on the
market enhance the control capability of
Embedded Pi and Raspberry Pi, e.g. to control
motor, sensors, etc.
Direct connection to the Raspberry Pi
Selection of one of the three modes of
operation with a jumper
Arduino™ form factor compatible interfaces:
– 1 SPI
– 1 I2C
– 4 PWM
– 1 UART
– 6 analog inputs
Embedded Pi extended interfaces:
– 1 SPI
– 1 I2C
– 2 PWM
– 1 UART
– 6 analog inputs
– 1 CAN
Description
The Embedded Pi, based on the STM32F103
MCU, is a triple-play platform for Raspberry Pi,
Arduino™ and the STM32 MCU family. Blending
all three communities together, the Embedded Pi
helps you to get the most out of each platform.
The Embedded Pi can operate in 3 modes:
Standalone, ST-Adapter and Raspberry Pi.
In Standalone mode the Embedded Pi acts as a
base platform, the STM32F103 controls the
Arduino™ shields directly.
In ST-Adapter mode the Embedded Pi controls
the Arduino™ shields, and the Raspberry Pi acts
as the GUI or command line console that send
commands and data to, and receives data from,
the Embedded Pi.
In Raspberry Pi mode the Embedded Pi acts as a
hardware connection bridge between the
Raspberry Pi and Arduino™ shields.
For more information, visit
www.element14.com/embedded-pi
October 2013
DocID025287 Rev 1
For further information contact your local STMicroelectronics sales office.
1/3
www.st.com
Ordering information
1
STM32-EMBPI/14
Ordering information
To order the STM32-EMBPI/14 Embedded Pi triple-play platform, use the order code
STM3210B-ARD.
2
Revision history
Table 1. Document revision history
2/3
Date
Revision
02-Oct-2013
1
Changes
Initial release.
DocID025287 Rev 1
STM32-EMBPI/14
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID025287 Rev 1
3/3
3
很抱歉,暂时无法提供与“STM3210B-ARD”相匹配的价格&库存,您可以联系我们找货
免费人工找货