STN0214

STN0214 Very high voltage NPN power transistor Features ■ High gain ■ Very high voltage capability 4 Applications 1 ■ Haptic ■ High voltage solenoid driving 2 3 SOT-223 Description The device is an NPN power bipolar transistor manufactured using the latest high-voltage diffused collector technology. Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking Package Packaging STN0214 N0214 SOT-223 Tape and reel February 2012 Doc ID 022769 Rev 1 1/7 www.st.com 7 Electrical ratings 1 STN0214 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Unit VCES Collector-emitter voltage (VBE = 0) 1400 V VCEO Collector-emitter voltage (IB = 0) 1200 V VEBO Emitter-base voltage (IC = 0) 6 V Collector current 200 mA Collector peak current (tP < 5 ms) 400 mA Base current 100 mA Base peak current (tP < 1 ms) 200 mA PTOT Total dissipation at Tamb = 25 °C 1.6 W Tstg Storage temperature IC ICM IB IBM °C Table 3. 150 Thermal data Symbol Rthj-amb -65 to 150 Max. operating junction temperature TJ (1) Parameter Thermal resistance junction-ambient 1. When mounted on PCB area of 1 cm2, t < 10 sec 2/7 Value Doc ID 022769 Rev 1 Value Unit 78 °C/W STN0214 2 Electrical characteristics Electrical characteristics (TCASE = 25 °C; unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICES Collector cut-off current (VBE = 0) VCE = 1400 V 10 µA IEBO Emitter cut-off current (IB = 0) VEB = 6 V 10 µA VCEO(sus)(1) Collector-emitter sustaining voltage (IB = 0) IC = 1 mA VCE(sat) (1) Collector-emitter saturation voltage IC = 10 mA IC = 100 mA IB = 2 mA IB = 20 mA 0.1 0.3 V V VBE(sat) (1) Base-emitter saturation voltage IC = 100 mA IB = 20 mA 0.8 V DC current gain IC = 1 mA IC = 200 mA VCE = 2 V VCE = 2 V 20 3 hFE (1) 1200 V 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5 % Doc ID 022769 Rev 1 3/7 Package mechanical data 3 STN0214 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4/7 Doc ID 022769 Rev 1 STN0214 Package mechanical data Table 5. SOT-223 mechanical data mm Dim. Min. Typ. A 1.80 A1 0.02 B 0.60 0.70 0.85 B1 2.90 3.00 3.15 c 0.24 0.26 0.35 D 6.30 6.50 6.70 0.1 e 2.30 e1 4.60 E 3.30 3.50 3.70 H 6.70 7.00 7.30 V Figure 2. Max. 10° SOT-223 mechanical data drawing 0046067_M Doc ID 022769 Rev 1 5/7 Revision history 4 STN0214 Revision history Table 6. 6/7 Document revision history Date Revision 02-Feb-2012 1 Changes First release Doc ID 022769 Rev 1 STN0214 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 022769 Rev 1 7/7