STOD32ATPQR

STOD32A 300 mA triple DC-DC converter for powering AMOLED displays Data brief     Overtemperature protection True-shutdown mode Short-circuit protection Package QFN16 (3.0x3.0 mm), 0.5 mm pitch Applications  QFN16(3.0x3.0 mm)  Features        Operating input voltage range from 2.5 V to 4.5 V 300 mA output current for step-up and inverting converters (VIN> 2.9 V) 55 mA output current for an auxiliary step-up converter (VIN> 2.9 V) 4.6 V positive step-up converter Programmable negative voltage from - 0.8 V to - 4.8 V default -4.0 V Auxiliary step-up converter positive voltage programmable step from 5.8 V to 7.9 V default 7.6 V Soft-start with inrush current protection Active matrix OLED power supply in portable devices Cellular phones, multimedia players, camcorders and digital still cameras Description The STOD32A is a triple DC-DC converter for AMOLED display panels. It integrates 300 mA step-up and inverting DC-DC converters plus auxiliary step-up converter. This device is particularly suitable for battery operated products, in which the major concern is overall system efficiency. Output voltages can be programmed by a dedicated pin, which implements SWIRE protocol. Soft-start with controlled inrush current limit, thermal shutdown and short-circuit protection are integrated functions of the device. Table 1: Device summary Order code Positive voltage Negative voltage Auxiliary positive voltage Package Packing STOD32ATPQR 4.6 V -0.8 to 4.8 V 5.8 to 7.9 V QFN16 (3x3 mm) 3000 samples per reel November 2015 DocID026653 Rev 2 1/8 www.st.com Contents STOD32A Contents 1 Application schematic .................................................................... 3 2 Package information ....................................................................... 4 3 QFN16 (3.0x3.0 mm) package information..................................... 5 4 Revision history .............................................................................. 7 2/8 DocID026653 Rev 2 STOD32A 1 Application schematic Application schematic Figure 1: Application schematic Table 2: Typical external components Component Manufacturer Value Size L 1, L 2, L 3 TOKO ALPS COILCRAFT 4.7 μH 2.5x2.0x1.2 2.5x2.0x1.2 4.0x4.0x1.2 CINA, CINP, CO2, CO3 MURATA SEMCO 22 μF 10 μF 0805 0402 0603 DocID026653 Rev 2 3/8 Package information 2 STOD32A Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4/8 DocID026653 Rev 2 STOD32A 3 QFN16 (3.0x3.0 mm) package information QFN16 (3.0x3.0 mm) package information Figure 2: QFN16 (3.0x3.0 mm) package outline 7185330_G DocID026653 Rev 2 5/8 QFN16 (3.0x3.0 mm) package information STOD32A Table 3: QFN16 (3.0x3.0 mm) package mechanical data mm Dim. Min. Typ. Max. A 0.50 0.55 0.60 A1 0.00 0.02 0.05 b 0.20 0.25 0.30 D 2.9 3.00 3.1 D2 1.55 1.70 1.80 E 2.9 3.00 3.1 E2 1.55 1.70 1.80 e L 0.50 0.20 0.30 0.40 Figure 3: QFN16 (3.0x3.0 mm) recommended footprint AM10265v1 All dimensions are in mm 6/8 DocID026653 Rev 2 STOD32A 4 Revision history Revision history Table 4: Document revision history Date Revision Changes 16-Jul-2014 1 Initial release. 03-Nov-2015 2 Updated Table 3: "QFN16 (3.0x3.0 mm) package mechanical data". DocID026653 Rev 2 7/8 STOD32A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved 8/8 DocID026653 Rev 2