STTH60L06W

STTH60L06 Turbo 2 ultrafast high voltage rectifier Features and benefits ■ Ultrafast switching ■ Low reverse current ■ Low thermal resistance ■ Reduces switching and conduction losses A K Description The STTH60L06, which is using ST Turbo 2 600 V technology, is specially suited for use in switching power supplies, and industrial applications, as rectification and discontinuous mode PFC boost diode. Thanks to its low VF characteristics, this device exhibits high performances in free-wheeling applications. September 2011 DO-247 STTH60L06W Table 1. Doc ID 10764 Rev 3 Device summary Symbol Value IF(AV) 60 A VRRM 600 V Tj (max) 175 °C VF (typ) 0.95 V trr (max) 70 ns 1/8 www.st.com 8 Characteristics 1 STTH60L06 Characteristics Table 2. Absolute ratings (limiting values) Symbol Parameter Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) Forward rms current 90 A Tc = 110 °C 60 A tp = 10 ms sinusoidal 600 A -65 to + 175 °C 175 °C Value (max) Unit 0.75 °C/W δ = 0.5 IF(AV) Average forward current IFSM Surge non repetitive forward current Tstg Storage temperature range Tj Table 3. Maximum operating junction temperature Thermal parameter Symbol Rth(j-c) Table 4. Symbol Parameter Junction to case Static electrical characteristics Parameter IR (1) Reverse leakage current VF (2) Forward voltage drop Test conditions Tj = 25 °C Tj = 150 °C Tj = 25 °C Tj = 150 °C Min. Typ. Max. Unit 50 VR = VRRM µA 160 1600 1.55 IF = 60 A V 0.95 1. Pulse test: tp = 5 ms, δ < 2 % 2. Pulse test: tp = 380 µs, δ < 2 % To evaluate the maximum conduction losses use the following equation: P = 0.93 x IF(AV) + 0.0045 IF2(RMS) 2/8 Value Doc ID 10764 Rev 3 1.2 STTH60L06 Characteristics Table 5. Symbol trr IRM Dynamic electrical characteristics Parameter Reverse recovery time Reverse recovery current Test conditions Tj = 25 °C Tj = 125 °C Min. Typ. IF = 0.5 A, Irr = 0.25 A IR =1 A Max. Unit 70 ns IF = 1 A, dIF/dt = 50 A/µs VR = 30 V 75 105 IF = 60 A, VR = 400 V dIF/dt = 100 A/µs 14 19 A 500 ns tfr Forward recovery Tj = 25 °C time IF = 60 A, dIF/dt = 200 A/µs VFR = 1.1 x VFmax VFP Forward recovery Tj = 25 °C voltage IF = 60 A, dIF/dt = 200 A/µs VFR = 1.1 x VFmax Doc ID 10764 Rev 3 3 V 3/8 Characteristics Figure 1. STTH60L06 Conduction losses versus average Figure 2. forward current Forward voltage drop versus forward current IFM(A) P(W) 200 140 δ = 0.5 120 180 δ = 0.2 Tj=150°C (maximum values) 160 δ = 0.1 100 140 δ = 0.05 δ=1 80 120 Tj=150°C (typical values) 100 60 80 40 Tj=25°C (maximum values) 60 T 40 20 δ=tp/T IF(AV)(A) 20 tp 0 VFM(V) 0 0 10 Figure 3. 20 30 40 50 60 70 80 90 100 0.00 0.25 Relative variation of thermal Figure 4. impedance junction to case versus pulse duration 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Peak reverse recovery current versus dIF/dt (typical values) IRM(A) Zth(j-c)/Rth(j-c) 1.0 55 0.9 50 VR=400V Tj=125°C IF=2 x IF(AV) 45 0.8 40 0.7 IF=IF(AV) 35 0.6 IF=0.5 x IF(AV) 30 0.5 25 0.4 20 0.3 15 0.2 10 Single pulse 0.1 5 tp(s) 0.0 dIF/dt(A/µs) 0 1.E-03 1.E-02 Figure 5. 1.E-01 1.E+00 0 50 Reverse recovery time versus dIF/dt Figure 6. (typical values) trr(ns) 100 150 200 250 300 350 400 450 500 Reverse recovery charges versus dIF/dt (typical values) Qrr(µC) 1000 4.5 VR=400V Tj=125°C 900 VR=400V Tj=125°C 4.0 IF=2 x IF(AV) 800 3.5 700 3.0 IF=2 x IF(AV) 600 IF=IF(AV) 2.5 500 IF=IF(AV) 2.0 IF=0.5 x IF(AV) 400 300 1.0 200 100 0.5 dIF/dt(A/µs) 0 dIF/dt(A/µs) 0.0 0 4/8 IF=0.5 x IF(AV) 1.5 50 100 150 200 250 300 350 400 450 500 0 Doc ID 10764 Rev 3 100 200 300 400 500 STTH60L06 Figure 7. Characteristics Reverse recovery softness factor versus dIF/dt (typical values) S factor Figure 8. Relative variations of dynamic parameters versus junction temperature 1.4 1.6 S factor IF< 2 x IF(AV) VR=400V Tj=125°C 1.4 1.2 1.2 1.0 1.0 0.8 QRR 0.8 0.6 IF=IF(AV) VR=400V Reference: Tj=125°C trr 0.6 IRM 0.4 0.4 0.2 0.2 Tj(°C) dIF/dt(A/µs) 0.0 0.0 0 50 Figure 9. 100 150 200 250 300 350 400 450 500 Transient peak forward voltage versus dIF/dt (typical values) 25 50 75 100 125 Figure 10. Forward recovery time versus dIF/dt (typical values) tfr(ns) VFP(V) 400 8 IF=IF(AV) Tj=125°C 7 IF=IF(AV) VFR=1.1 x VF max. Tj=125°C 350 6 300 5 250 4 200 3 150 2 100 1 50 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 50 100 150 200 250 300 350 400 450 500 0 100 200 300 400 500 Figure 11. Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25°C 100 VR(V) 10 1 10 100 Doc ID 10764 Rev 3 1000 5/8 Package information 2 STTH60L06 Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.55 to 1.0 N·m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 6. DO247 dimensions Dimensions Ref. Millimeters Min. V Typ. Inches Max. Min. Typ. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 Dia V F2 2.00 0.078 A H F3 2.00 G 2.40 0.078 10.90 0.094 0.429 L5 H 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.169 L L2 L4 F2 L3 L1 L2 F3 D V2 L3 F G M E 18.50 14.20 0.728 14.80 0.559 0.582 L4 34.60 1.362 L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. 6/8 0.145 Doc ID 10764 Rev 3 3.55 3.65 0.139 0.143 STTH60L06 3 Ordering information Ordering information Table 7. 4 Ordering information Order code Marking Package Weight Base qty Delivery mode STTH60L06W STTH60L06W DO-247 4.40 g 30 Tube Revision history Table 8. Document revision history Date Revision Changes 07-Sep-2004 1 First issue 10-Sep-2004 2 Junction to case value (Thermal parameter on page 2) changed from 0.70 °C/W to 0.75 °C/W 07-Sep-2011 3 Updated IFSM from 400 A to 600 A. Doc ID 10764 Rev 3 7/8 STTH60L06 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 10764 Rev 3