TJM4558CD

TJM4558 WIDE BANDWIDTH DUAL BIPOLAR OPERATIONAL AMPLIFIERS ■ INTERNALLY COMPENSATED ■ SHORT-CIRCUIT PROTECTION ■ GAIN AND PHASE MATCH BETWEEN AMPLIFIER ■ LOW POWER CONSUMPTION ■ PIN TO PIN COMPATIBLE WITH MC1458/LM358 ■ GAIN BANDWIDTH PRODUCT (at 100kHz) N DIP8 (Plastic Package) 5.5MHz DESCRIPTION The TJM4558 is a high performance monolithic dual operational amplifier. The circuit combines all the outstanding features of the MC1458 and, in addition possesses three times the unity gain bandwidth of the industry standard. D SO8 (Plastic Micropackage) ORDER CODE Part Number Temperature Range TJM4558C 0°C, +70°C TJM4558I -40°C, +105°C Example : TJM4558CN Package N D P • • • • • • P TSSOP8 (Thin Shrink Small Outline Package) N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT)) P = Thin Shrink Small Outline Package (TSSOP) - only available in Tape & Reel (PT) PIN CONNECTIONS (top view) 8 VCC+ Output 1 1 Inverting input 1 2 - Non-inverting input 1 3 + V - 4 CC December 2003 7 Output 2 - 6 Inverting input 2 + 5 Non-inverting input 2 1/7 TJM4558 SCHEMATIC DIAGRAM (1/2 TJM4558) 3.1kΩ VCC Inverting input 150Ω Non-inverting input 25Ω Output 25Ω 10pF 87pF 7.1kΩ 480Ω 7.1kΩ 4.2kΩ 36kΩ VCC ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter TJM4558I Supply Voltage TJM4558C ±22 Unit V Vi Input Voltage ±15 V Vid Differential Input Voltage ±30 V Ptot Power Dissipation 680 mW Output Short Circuit Duration Infinite Toper Operating Free-Air Temperature Range Tstg Storage Temperature -40 to +105 0 to +70 °C -65 to +150 °C ELECTRICAL CHARACTERISTICS VCC = ±15V, Tamb = 25°C (unless otherwise specified) Symbol Vio Iio Iib Avd 2/7 Parameter Min. Input Offset Voltage (Rs ≤ 10kΩ) Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. Input Offset Current Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. Input Bias Current Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. Large Signal Voltage Gain (RL = 2kΩ, Vo = ±10V) Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. 50 25 Typ. Max. Unit 1 5 6 mV 20 40 100 nA 50 100 400 nA 200 V/mV TJM4558 Symbol SVR ICC Vicm CMR Ios Vo SR tr KOV Ri Ci Ro B GBP THD en Parameter Min. Supply Voltage Rejection Ratio (Rs ≤ 10kΩ) Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. Supply Current, all amplifiers, no load Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. Input Common Mode Voltage Range Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. 2.3 4 ±12 ±12 Tmin. ≤ Tamb ≤ Tmax. RL = 10kΩ RL = 2kΩ RL = 10kΩ RL = 2kΩ Total Harmonic Distortion (f = 1kHz, Av = 20dB, RL = 2kΩ, Vo = 2Vpp, CL = 100pF, Tamb = 25°C) Equivalent Input Noise Voltage (RS = 100Ω, f = 1kHz) VO1/VO2 Channel Separation dB 4.5 mA V dB 10 20 mA ±12 ±10 ±12 ±10 ±14 ±13 V 2.2 0.3 Overshoot (Vi = ±20mV, RL = 2kΩ, CL = 100pF, Tamb = 25°C, unity gain) Input Capacitance Output Resistance Unity Gain Bandwidth Gain Bandwidth Product (Vi = 10mV, RL = 2kΩ, CL = 100pF, f = 100kHz, Tamb = 25°C) Unit 90 70 Slew Rate (Vi = ±10, RL = 2kΩ, CL = 100pF, Tamb = 25°C, unity gain) Rise Time (Vi = ±20mV, RL = 2kΩ, CL = 100pF, Tamb = 25°C, unity gain) Input Resistance Max. 90 77 Common-mode Rejection Ratio (Rs ≤ 10kΩ) Tamb = +25°C Tmin. ≤ Tamb ≤ Tmax. Output Short Circuit Current Output Voltage Swing Tamb = +25°C Typ. 0.3 V/µs µs % 15 2 MΩ 1.4 75 2.8 pF Ω MHz 5.5 0.008 MHz % 12 nV -----------Hz 120 dB 3/7 TJM4558 TRANSIENT RESPONSE TEST CIRCUIT OSCILLOSCOPE OSCILLOSCOPE RL I 4/7 CL TJM4558 PACKAGE MECHANICAL DATA Plastic DIP-8 MECHANICAL DATA mm. inch DIM. MIN. A TYP MAX. MIN. 3.3 TYP. MAX. 0.130 a1 0.7 B 1.39 1.65 0.055 0.065 B1 0.91 1.04 0.036 0.041 0.5 0.015 b b1 0.028 0.5 0.38 D 0.020 0.020 9.8 0.386 E 8.8 0.346 e 2.54 0.100 e3 7.62 0.300 e4 7.62 0.300 F 7.1 0.280 I 4.8 0.189 L Z 3.3 0.44 0.130 1.6 0.017 0.063 P001F 5/7 TJM4558 PACKAGE MECHANICAL DATA SO-8 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 1.35 1.75 0.053 0.069 A1 0.10 0.25 0.04 0.010 A2 1.10 1.65 0.043 0.065 B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 4.80 5.00 0.189 0.197 E 3.80 4.00 0.150 0.157 e 1.27 0.050 H 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.40 1.27 0.016 0.050 k ddd 8˚ (max.) 0.1 0.04 0016023/C 6/7 TJM4558 PACKAGE MECHANICAL DATA TSSOP8 MECHANICAL DATA mm. inch DIM. MIN. TYP A MAX. MIN. TYP. 1.2 A1 0.05 A2 0.80 b MAX. 0.047 0.15 0.002 1.05 0.031 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 D 2.90 3.00 3.10 0.114 0.118 0.122 E 6.20 6.40 6.60 0.244 0.252 0.260 E1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 K 0˚ L 0.45 L1 1.00 0.60 0.006 0.039 0.041 0.0256 8˚ 0˚ 0.75 0.018 1 8˚ 0.024 0.030 0.039 0079397/D Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners. © 2003 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Repubic - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain Sweden - Switzerland - United Kingdom - United States http://www.st.com 7/7