0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
TSM115CD

TSM115CD

  • 厂商:

    STMICROELECTRONICS(意法半导体)

  • 封装:

  • 描述:

    TSM115CD - 3.3V 5V ±12V Housekeeping IC - STMicroelectronics

  • 数据手册
  • 价格&库存
TSM115CD 数据手册
TSM115 3.3V +5V ±12V Housekeeping IC PRELIMINARY DATA s s s s s s s s s Over voltage and under voltage protection for 3.3V +5V and ±12V without external components Over current protection for 3.3V 5V and 12V with external components Under voltage blanking fonction Power good input/output Externally adjustable PG delay Fault output Remote output Externally adjustable remote delay 2kV ESD protection N DIP-20 (Plastic Package) D SO-20 (Plastic Micropackage) PIN CONNECTIONS (top view) 1 2 3 4 5 6 7 8 9 Fault Gnd nc PG Tuv/Tpg Rem Vcc 20 Rcrnt 19 nc 18 Is3.3 17 Vs3.3 16 Is12 15 DESCRIPTION The TSM115 integrated circuit incorporates all sensing circuitry to protect from over and under voltage and over current a multiple output power supply (3.3V, +5V and ±12V). TSM115 incorporates all the necessary functions for Housekeeping features which allow safe operation in all conditions, and very high system integration. Trem/Tsur Vs-12 14 nc Bsense Vs12b 13 Vs12a 12 Is5 11 APPLICATION s PC SMPS Multiple Power Line Housekeeping IC (3.3V +5V ±12V) 10 Vs5 ORDER CODE Part Number TSM115CN TSM115CD Temperature Range 0 to 95°C Package DIP SO Packaging Tube Tube or Tape & Reel Marking TSM115C M115 July 2004 1/17 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. TSM115 1 Pin Description Name Fault Gnd PG Pin # 1 2 4 Type Open collector Power supply Open collector Function Pin Description Tuv/Tpg 5 Timing capacitor Rem 6 Control Input pin Trem/Tsur 7 Timing capacitor Bsense Vs5 Is5 Vs12a Vs12b Vs-12 Is12 Vs3.3 Is3.3 Rcrnt Vcc 9 10 11 12 13 14 15 16 17 19 20 Control input pin Analog input Analog Input Analog input Analog input Analog input Analog Input Analog input Analog Input Analog input Power supply Fault output. Output of the over voltage and under voltage comparators. Signal ground and silicon substrate Output of the Tpg comparator. This pin goes low upon an under voltage condition. Except for the delay set by the Tpg capacitor this pin always reflects the actual state of the under voltage sensing comparators output. A capacitor from this pin to Gnd provides a delay between outputs rail voltage within regulation and PG output going high. Capacitor discharges whenever Bsense low or Rem high or UVP is detected. This capacitor will also provide the under voltage blanking function when the voltage at this pin is larger than the Vref voltage. The under voltage function resume. Pulling this pin high will send the Fault pin high latching off the power supply, reset the internal latch, discharge the start-up timing capacitors, Tuv and Tpg capacitors, allowing normal start up of the system. Pulling this pin low will send the Fault pin low, initiating a normal start up function. A capacitor from this pin to Gnd will delay the Fault signal when the Rem pin is used to shut down the power supply. The PG will signal a power failure warming immediately, but the Fault pin shut down of the power will be delayed. This capacitor will also provide the overcurrent blanking function (surge current). Non inverting input to the Bsense voltage sensing comparator. Pulling this pin lower than 2.5V will cause PG goes low and Tuv goes low. Over voltage and under voltage detection for +5V rail 5V overcurrent control sense input. Over voltage and under voltage detection for +12V rail Over voltage and under voltage detection for +12V rail Over voltage and under voltage detection for -12V rail. 12V overcurrent control sense input. Over voltage and under voltage detection for 3.3V rail. 3.3V overcurrent control sense input. A resistor from this pin to Gnd will provide the internal constant current. Supply input voltage ABSOLUTE MAXIMUM RATINGS Symbol Vcc Vpmax Vnmax VDBTT VTER PT Tstg Tj ESD DC Supply Voltage DC Supply Voltage 1 Terminal voltage Vs3.3, Is3.3, Vs12, Is12, Vs5, Is5 Terminal voltage Vs-12 VTpg/Tuv, VTrem/Tsur input voltage Other terminals Power dissipation Storage temperature Junction temperature Electrostatic Discharge Value -0.3 to 18 -0.3 to 18 -15 to 5 -0.3 to 3.3V -0.3 to Vcc 1 -55 to 150 150 2 Unit V V V V V W °C °C kV 1) All voltage values, except differential voltage are with respect to network ground terminal. OPERATING CONDITIONS Symbol Vcc Toper DC Supply Conditions Temperature range Parameter Value 3 to 15 0 to 95 Unit V °C 2/17 Electrical Characteristics 2 Electrical Characteristics Symbol Parameter Test Condition Min Typ Max TSM115 Tamb = 25°C, Vcc=5V, Vs3.3=3.3V, Vs5=5V, Vs12= 12V, Vs-12=-12V, Rem=Low, Rcrnt=12kΩ Unit Total Current Consumption Icc Iccstdby Vccmin Total Supply Current Total Supply Current in Stand-by Condi- Rem=high tions Vs3.3=0V, Vs5=0V Min operating Vcc Vs12=0V, Vs-12=0V Tmin < Tamb < Tmax 1 1 3 mA mA V Over Voltage and Under Voltage Protection Vov12 Vuv12 Iin12b Vov5 Vuv5 Iin5 Dis5 Vov3.3 Vuv3.3 Iin3.3 Vov-12 Vuv-12 Iin-12 Dis-12 Over Voltage Sense 12V Under Voltage Sense 12V Input current Voltage sense 12V Over Voltage Sense 5V Under Voltage Sense 5V Input current Voltage Sense 5V Disable Voltage Sense 5V Over Voltage Sense 3.3V Under Voltage Sense 3.3V Input current Voltage Sense 3.3V Over Voltage Sense -12V Under Voltage Sense -12V Input current Voltage sense -12V Disable Voltage Sense -12V 13.6 8.85 50 6.01 4.00 50 7 3.88 2.52 25 -15.49 -9.99 -200 14 9.12 100 6.20 4.12 100 7.5 4.00 2.60 50 -15.04 -9.70 -100 3.3 14.4 9.39 200 6.39 4.24 200 8 4.12 2.68 100 -14.59 -9.41 -50 V V µA V V µA V V V µA V V µA V Internal delay time Tdelay Internal time 30 37 45 µs Over current Protection Is3.3 Vicm3.3 Vio3.3 Is5 Vicm5 Vio5 Is12 Vicm12a Vio12a Vicm12b Vio12b Iin12a Bsense Thbs Ilbs Iobs DIobsT Vbsoh Iclbs Vinbs Bsense voltage threshold Bsense current leakage Current source Current source drift in temperature Clamp voltage Clamping current Input voltage 1.218 Bsense=1V Bsense=1.5V Tmin < Tamb < Tmax IoBsense=1µA Bsense > 2.5V Tmin < Tamb < Tmax 90 2.00 3 -0.3 0 100 5 2.15 3.6 1.282 1 110 2.30 5 2.5 V µA µA µA V mA V Current source Input common mode Input offset voltage Current source Input common mode Input offset voltage Current source Input common mode Input offset voltage Input common mode Input offset voltage Input current 46 0.7 46 0.7 46 0.7 0.7 2 10 50 2 50 2 50 2 54 Vov3.3 3 54 Vov5 3 54 Vov12 3 Vov12 3 µA V mV µA V mV µA V mV V mV µA 3/17 TSM115 Electrical Characteristics Symbol Parameter High threshold Low threshold Test Condition From Low to high From high to low Min 1.87 1.0 Typ 1.93 1.25 Max 1.99 1.4 Unit V V Rem THrm TLrm Power Good (PG) Ipgol Vpgol Tpgr Sink current Low output voltage Rise time PG VPg=0.4V Ipg=10mA Rpg=1K 10 0.4 500 mA V ns Under Voltage Blanking (Tuv) and Power Good (Tpg) times Iotuvtpg THtuv TLtuv THtpg TLtpg Idtuvtpg Vtuvtpgol Vtuvtpgoh VinTuvTpg DIotuvtpg Current output source High threshold blanking Low threshold blanking High threshold power good Low threshold power good Current discharge of TuvTpg Low output voltage Clamp voltage Input voltage Current source drift in temperature Vtuvtpg = 0V From low to high voltage From high to low voltage From low to high voltage From high to low voltage Iotutpg = 1mA 2.1 -0.3 Tmin < Tamb < Tmax 2.3 4.5 0.287 1.218 0.9 2 5 0.312 0.25 1.25 1 5 5.5 0.337 1.282 1.1 0.2 2.5 2.3 1 µA V V V V mA V V V µA Remote (Trem) and Surge current blanking (Tsur) times Iotrm Iotsur THtrm TLtrm Idtrmtsur Vtrmtsurol Vtrmtsuroh Vintrmtsur DIotrm DIotsur Fault Ifltol Vfltol THVcc TLVcc HystVcc Rcrnt VRcrn Output voltage 1.20 1.25 1.30 V IFault sink current Low output voltage High threshold voltage, Vcc low to high Low threshold voltage, Vcc high to low Vcc hysteresis : THVcc-TLVcc VFault=0.4V IFault=10mA Rem low, all lines between UV and OV. 10 0.4 2.95 2.65 TBD mA V V V mV TRem current source Tsur current source High thresold voltage TRem Low thresold voltage TRem Current discharge of TRemTsur Low output voltage Clamp voltage Input voltage Current source drift in temperature Current source drift in temperature Vtrmtsur = 0V Vtrmtsur = 0V From low to high From high to low Iotmtsur = 1mA 2.1 -0.3 Tmin < Tamb < Tmax Tmin < Tamb < Tmax 2.3 90 9 1.218 0.9 2 100 10 1.25 1 5 110 11 1.282 1.1 0.2 2.5 2.3 5 500 µA µA V V mA V V V µA nA TBD 300 4/17 Electrical Characteristics Fig. 1: Application Schematic TSM115 Primary Rectification MAIN Converter 12V 5V 3.3V -12V PWM + OPTO + Vref Auxiliary converter PWM + OPTO + Vref Over & Undervoltage Protection Logic FAULT Sequencer TSM115 PG REM Fig. 2: Internal Bloc Schematic POWER SUPPLY 12V 5V 3.3V rsc12b rsc12a Vs12a Vs5 TSM115 FAULT TO PWM Crem TO MOTHERBOARD Vs3.3 OVP rsc3.3 rsc5 UVP Rocp12V Is12 Rocp5V OCP Is5 LOGIC BLOCK MAIN POWER SUPPLY PG Rem Trem/Tsur Tuv/Tpg Cpg Gnd 12V 5V 3.3V -12V Rocp3.3V Is33 Vs-12 Bsense Rcrnt ybtsV 12V Vs12b Rocp3.3 5Vstby Rocp12 Rocp5 ybtsV b21csr rsc12a rsc5 rsc3.3 12V 12V 5V 3.3V -12V ccV ybtsV5 5/17 TSM115 Principle of Operation and Application Hints Fig. 3: Internal Detailed Schematic Vs12a Vs12b Vs-12 Vs3.3 Is3.3 Is12 Vs5 Tpg IotuvTpg 5µA Is3.3 50µA Is5 50µA Is12 50µA Iobs 100µA Bsense Bsense Rem 1.93V 1.2V OV_UV_OC TDelay = 30µs Fault I1 V1 V52.1 Idtrmtsur 5mA Q! R V52.1 Trem Tsur Trem Q S Iotrem 100µA Iotsur 10µA V52.1=ferV Q! S hctaL vuT QR meR V1 V5.2 V52.1 IdTuvTpg 5mA V52.1 Tuv Tpg X4 Tuv OCP3.3 OCP5 OCP12A OCP12B OVP -rails OVP +rails UVP -rails UVP +rails 1.475 1.125 Vref Rcrnt ferV Vcc Gnd Is5 Pg V52.1 V1 V52.1 V5.2 V5.2 V52.1 ferV V5.2 6/17 TSM115 1 - Rem On/Off Electrical Characteristics 2 - UVP Function Rem On/Off, Tuv start up OK V5 V5 Uvp Gnd Gnd V-12 Bsense V-12 Bsense Rem Rem Trem/Tsur 100µA 100µA Trem/Tsur Tuv/Tpg 5µA 5µA Vtpg Vtuv Tuv Tuv/Tpg Fault Fault PG PG Tuv 7/17 TSM115 3 - OVP/UVP Function Rem On/Off, Tuv OK Electrical Characteristics 4 - OVP/UVP Function Rem On/Off, Tuv Nok V5 Ovp Uvp V5 Ovp Uvp Gnd Gnd V-12 Bsense V-12 Bsense Rem Rem 100µA 100µA Trem/Tsur Tuv/Tpg 5µA Vtpg Vtuv Tuv Trem/Tsur Tuv/Tpg Vtuv Tuv Tdelay Fault Fault PG PG 8/17 Electrical Characteristics 5 - Vcc turn On/off, Bsense 6 - OCP Rem On/Off TSM115 Vcc V5 Uvp Gnd OCP V5 Uvp Gnd V-12 V-12 Bsense Bsense Rem Rem 10µA 100µA Trem/Tsur Trem/Tsur Tsur Tuv/Tpg 5µA Vtpg Vtuv Tuv/Tpg Tuv Tdelay Fault Fault Pg PG Tpg Tpg 9/17 TSM115 7 - Rem On/Off with OCP during Tpg Electrical Characteristics 8 - Rem On/Off with OCP during Tuv OCP OCP V5 Uvp Gnd Uvp Gnd Uvp V5 V-12 V-12 Bsense Bsense Rem Rem Trem/Tsur 10µA Trem/Tsur 100µA 10µA Tsur Tsur Tuv/Tpg Fault Tuv/Tpg Tdelay Fault Tuv Tdelay Pg Tpg Pg 10/17 Electrical Characteristics 9 - Fault Vcc start up Vcc TSM115 10 - Fault Vcc shut down Vcc V5 V5 Gnd Gnd V-12 V-12 Bsense Bsense Rem Rem Trem/Tsur Trem/Tsur Trem Tuv/Tpg Vtpg Tuv/Tpg Fault Tuv Vtuv Fault PG PG Tpg 11/17 TSM115 11 - Fault Vcc shut down start up Vcc VccLH VccHL Vcc V5 VccLH Electrical Characteristics 12 - Fault Vcc start up and shut down VccHL V5 Gnd Gnd V-12 Bsense V-12 Bsense Rem Rem Trem/Tsur Trem/Tsur Tuv/Tpg Vtpg Vtuv Tuv Tuv/Tpg Tuv Vtpg Vtuv Fault PG Fault PG Tpg Tpg 12/17 Electrical Characteristics 13 - Vcc turn on, OVP function, Remote On/Off TSM115 Vcc V5 Uvp Gnd Ovp Uvp V-12 Bsense Rem 100µA Trem/Tsur 5µA Vtpg Vtuv Tuv 10µA Vtpg Vtuv Tuv/Tpg Tuv Fault PG Tpg PG Tdelay Tpg 13/17 TSM115 14- Vcc turn On, AC line resume Bsense Electrical Characteristics Vcc V5 Gnd V-12 Bsense Bsense Rem Rem Trem/Tsur Trem/Tsur 5µA Vtpg Vtuv Tuv/Tpg Tuv Fault PG Tpg 14/17 Electrical Characteristics TSM115: Housekeeping IC TSM115 is a one chip solution for all PC SMPS: it integrates on one chip the Housekeeping Circuitry (Over and under voltage and over current protections, with adequate sequencing). TSM115 FAULT The Over Voltage and Under Voltage Circuits outputs are ORed before activating a latch. When activated, this latch commands the full switch OFF of the main power lines (3.3V, 5V, 12V) by an external link between the housekeeping and the primary PWM circuits via the main optocoupler or any other device. Multiple Power Line Protection The TSM115 Housekeeping Circuit is dedicated to 3.3V, 5V and ±12V power lines protection. It integrates a multiple Over and under Voltage Protection Circuit and a multiple over current Protection Circuit as well as all the necessary logic and transient timing management circuits for optimal and secure communication with the motherboard, during start up, switch off and stabilized conditions. Power Good The Under Voltage Circuits are Ored to switch the Power Good output active (PG) to warn the motherboard that the voltage of at least one of the three power lines is out of range. The PG activation bears an internal Tpg delay circuitry which can be adjusted with an external capacitor (Cpg). Over Voltage Protection The Over Voltage Protection Circuit is made of comparators with internal voltage thresholds which do not require any external components for proper operation. The outputs of these comparators are ORed. Remote Control The remote control information from the mother board, enters via the Remote pin (REM) to activate an internal latch. When the Remote pin is active, the external Fault link between Housekeeping circuit and the PWM generator is active (high = PWM OFF) and the PG pin is active (high). Note that to reset effectively the latch, a minimum width Remote pulse should be applied thanks to an internal delay circuitry (Trem) which can be adjusted with an external capacitor (Crem). Under Voltage Protection The Under Voltage Protection Circuit is made of comparators with internal voltage thresholds which do not require any external components for proper operation. The outputs of these comparators are ORed, and blanked by an internal delay circuitry (Power Up Blanking - Tuv) which can be adjusted with an external capacitor (Cuv). This allows that during power up, the under voltage protection circuit is inhibited. Over Current Protection The Over current Protection Circuit is made of comparators with external thresholds which can be adjusted by changing a resistor. The outputs of these comparators are ORed. 15/17 TSM115 3 Package Mechanical Data Package Mechanical Data Plastic DIP-20 (0.25) MECHANICAL DATA mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.34 8.5 2.54 22.86 7.1 3.93 0.130 0.053 0.254 1.39 0.45 0.25 25.4 0.335 0.100 0.900 0.280 0.155 1.65 TYP MAX. MIN. 0.010 0.055 0.018 0.010 1.000 0.065 TYP. MAX. inch P001J 16/17 Package Mechanical Data Package Mechanical Data SO-20 MECHANICAL DATA mm. DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F L M S 7.40 0.50 12.60 10.00 1.27 11.43 7.60 1.27 0.75 8˚ (max.) 0.291 0.020 13.00 10.65 0.35 0.23 0.5 45˚ (typ.) 0.496 0.393 0.050 0.450 0.300 0.050 0.029 0.512 0.419 0.1 TYP MAX. 2.65 0.2 2.45 0.49 0.32 0.014 0.009 0.020 0.004 MIN. TYP. MAX. 0.104 0.008 0.096 0.019 0.012 inch TSM115 PO13L Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2004 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Repubic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States www.st.com 17/17
TSM115CD 价格&库存

很抱歉,暂时无法提供与“TSM115CD”相匹配的价格&库存,您可以联系我们找货

免费人工找货