5516

Wire Wound Chip Inductors ——O-Series 0603(1608)/5516 Features 1. Coil body of ceramic material. 2. Contact area of pure tin with a nickel barrier layer. PAGE 1/3 3. Windings are created by laser-cutting of the copper layer and are –for protection – completely lacquer-coated. 4. Lead Free (RoHS Compliance) Applications Typical applications are resonant circuits or impedance matching for video cameras, mobile telephones and antenna amplifiers etc Ordering Information 5516 (1) (1) Series - 5516 : Size 0603(1608) Laser trimmed. 270 (2) * (3) * (4) 51 (4) Delivery Form 4 : coated, taped on 8 mm cardboard tape packing unit reels Φ180mm, 10.000 pcs. (2) Inductance Value example: 27x10X =27x10 0=27(nH) (3) Inductance Tolerance 8 : ±0.2 nH 9 : ±0.3 nH 3 : ±5% 4 : ±2% Shape and Dimensions (mm) Pad Layout Recommendation a 0,8…1,0 b 2,0…2,6 c 0,7…0,9 Dimensions [mm] *All specifications are subject to change without notice. Wire Wound Chip Inductors ——O-Series 0603(1608)/5516 Electrical Parameters L [nH] 1,0 1,2 1,5 1,8 Qtyp @800MHz 60 fL,Q [MHz] 100 fres,min [MHz] 16000 D.C.R. max. [mΩ ] 20 IN,max [mA] 1800 Tol. [%] PAGE 2/3 Order No. 5516 010 ** 51 5516 012 ** 51 5516 015 ** 51 5516 018 ** 51 Qmin 7 8 8 12 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 5 5 4 4 60 50 50 50 40 40 40 40 40 40 40 40 40 40 40 40 35 35 35 35 35 35 35 30 30 30 25 25 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 25,2 25,2 25,2 25,2 15000 13000 12000 10000 10000 9000 8000 7000 6000 6000 6000 5000 5000 4500 4000 4000 3000 3000 2000 2500 2500 2000 2000 1800 1800 1600 1400 1300 25 30 33 35 40 60 65 100 150 150 180 200 350 400 450 500 550 600 800 950 1200 1300 1500 1800 3000 5000 6000 7000 1800 1500 1500 1500 1400 1200 1100 800 700 700 650 600 450 420 400 360 350 300 270 250 230 220 200 160 130 120 110 110 ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 /0,3 nH ±0,2 / 5 % ±0,2 / 5 % ±0,2 / 5 % ±0,2 / 5 % ±0,2 / 5 % 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 2%/5% 5516 022 ** 51 5516 027 ** 51 5516 033 ** 51 5516 039 ** 51 5516 047 ** 51 5516 056 ** 51 5516 068 ** 51 5516 082 ** 51 5516 100 ** 51 5516 120 ** 51 5516 150 ** 51 5516 180 ** 51 5516 220 ** 51 5516 270 ** 51 5516 330 ** 51 5516 390 ** 51 5516 470 ** 51 5516 560 ** 51 5516 680 ** 51 5516 820 ** 51 5516 101 ** 51 5516 121 ** 51 5516 151 ** 51 5516 181 ** 51 5516 221 * *51 2,2 2,7 3,3 3,9 4,7 5,6 6,8 8,2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 All values on ceramic core. *All specifications are subject to change without notice. Wire Wound Chip Inductors ——O-Series 0603(1608)/5516 Electrical Characteristic Curves Q f actor versus f requency Impedance |Z| ver sus f requency PAGE 3/3 Inductance L versus DC C urrent Iop/IR versus ambient temper atur e Climatic category acc. to DIN IEC 68-1:55/125/56 Test equipment : Inductance and Q: Agilent 4291A+16096A. Resonant Frequency : Agilent 8720. D.C.R. : Burst Resistomat 2329.(at20℃) *All specifications are subject to change without notice.