CPFC85-1M15NP

Common Mode Choke Type: CPFC85 ◆ Product Description ・9.3×8.2mm Max.(L×W), 5.5mm Max. Height. ◆ Feature ・Ideally used as EMC and xDSL CO common mode choke. ・RoHS Compliance. ◆ Dimensions (mm) 9.1±0.2 5.5 MAX. 0.5 9.1±0.2 7.2±0.1 8. 1 3. 0 ± 9. 6 2. 0 ± 4. 3 2 . 0 ± 0 . 8 0.9 0.05±0.05 ◆ Land Pattern (mm) 1.5 ◆ Schematics (Bottom) 6.5 1.5 3.0 5 . 2 8 . 2 0 . 2 ② ③ ② ① ④ ① ④ Mark of polarity MARK OF POLARITY 5 . 2 For partname: CPFC85NP-100M03 CPFC85NP-100M10 ③ For partname: CPFC85-1M15NP SILK SCREEN ◆ Specification (For xDSL CO) Core Part Name Material Stamp Impedance (K ) Ω (1-4),(2-3) D.C.R. (m ) (1-4),(2-3) Rated current (1-2)(A) 1 (3-4) shorted Ω ※ CPFC85NP-100M03 Ni-Zn 0M03 0.3(@100MHz) 20 5.0 CPFC85NP-100M10 Ni-Zn 0M10 1.0(@100MHz) 25 3.0 ※ 1.Rated current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃).
Specification (For EMC) Stamp Inductance (1-4),(2-3) @ 100kHz 1M15 4.7mH±30% Within Core Part Name Material CPFC85-1M15NP Mn-Zn Common mode attenuation(1-4,2-3) D.C.R. (1-2) 2 30dB(Typ.)@100kHz 2.0 Max. at 20 (3-4)shorted 43dB(Typ.)@1MHz 34dB(Typ.)@10MHz ※ Ω ℃ Isolation voltage (3-4), 1 minute 500Vrms AC ※ 2. D.C.R. is measured by 2 lines as series because impedance will be deteriorated when D.C.R. is measured by 1 line. Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1