SMB329

SMB329/SMB339 Programmable Switch-mode, Li+ Battery Chargers with TurboCharge™ Mode, USB “Onthe-Go” Power, USB Power Source Detection and Automatic Input Current Limiting FEATURES & APPLICATIONS • • • • • • • • • • • • • • • • Automatic input current limit * Optional automatic power source detection per latest USB charging specification 1.0 USB or AC input with programmable input current limiting Up to 1.25A continuous charging current from AC adapter Up to 750mA charging current from 500mA USB port using automatic TurboCharge™ mode * +4.35 to +6.2V input range (+18V input protected) USB “On-the-Go” Power support for USB OTG enabled devices (+5V reverse output @ 500mA) 50mA SYSON output for “dead battery” boot-up (SMB329) Analog output voltage for direct charge current measurement Reverse current blocking High-efficiency 3MHz current-mode step-down regulator Integrated frequency compensation and power MOSFETs High-accuracy float voltage regulation: 1% Pre-charge and complete-charge safety timers Battery pack thermal monitor 2 Digital programming of all major parameters via I C interface (One-time programmable for default, non-volatile settings) o Fast charge voltage threshold, float voltage o Pre-charge, fast charge, termination current Status register monitors and flags charger operation o Charge in-progress/termination o Charge timer fault o Over-current limiting o UV/OV detection/shutdown 1.95mm x 2.22mm CSP-20 package (0.4mm pitch lead-free) Preliminary Information INTRODUCTION The SMB329 and SMB339 are programmable single-cell lithium-ion/lithiumpolymer battery chargers designed for a variety of portable applications. The devices provide a simple and efficient way to charge high-capacity LiIon batteries via a USB or AC adapter input. Furthermore, the SMB329 and SMB339 are able to automatically adjust input current level by detecting the AC/DC adapter’s maximum stable output current, thereby automatically matching wall adapter to electronic device. Unlike conventional devices, the SMB329’s and SMB339’s high-efficiency, switch-mode operation eliminates the thermal problems of conventional linear solutions. Also the buck converter architecture effectively multiplies the input current to increase charge rate for the Li+ cell and uses current limited supplies like USB more efficiently. A 50mA SYSON switch output provides a bypass power supply to boot the system for “instant on” without waiting for charging in case of a dead battery (SMB329 only). Both products also support USB On-the-Go devices by providing the required USB-OTG +5V power supply using the Li-Ion battery as a source. The SMB329 and SMB339 can switch between USB mode and AC Adapter mode and work seamlessly in conjunction with a USB controller. Furthermore, they offer the option to automatically differentiate an AC/DC wall adapter from a USB2.0 hub via the D+/D- USB lines, making them compatible with USB battery charging specification 1.0. Charge control includes qualification, trickle-charge, pre-charge, constant current/constant voltage, float voltage and termination/safety settings that are fully programmable via a serial I2C/SMBus, making the devices truly a flexible solution. Fast charge current level can be set via I2C (limited in USB mode to ensure 100mA or 500mA input). Built-in is reverse-current blocking to prevent inadvertent cell discharge. The SMB329 and SMB339 offer the option to automatically charge the battery only when the battery voltage is below a selectable “dead-battery” threshold. High-frequency operation and integrated power FETs contribute to a reduced external component count and size. The SMB329 and SMB339 also offer several features that protect the battery pack as well as the charger and input circuitry: over-current, under/over-voltage and thermal protection. Ultra-accurate, 1% battery float voltage control improves battery capacity utilization. The STAT output is an interrupt to flag various status/flag events (programmable selection) and the status register can be read via the serial port. The SMB329 and SMB339 are available in an ultra-compact lead-free uCSP-20 package and are rated over the –30C to +85C temperature range. The SMB329 is also offered in a 4x4 QFN-24 package. • • Applications • • • • • 2.5G/3G/GSM/CDMA Phones Smartphones/PDAs Portable Media Players Portable GPS Terminals Handheld Game Consoles * Patents pending SYSTEM APPLICATION USB 500mA 4.35V-5.5V VB US D- Handheld System "Instant On" Power 50mA (SMB329) USB-OTG Output 500mA Total Output 550-1250mA Charging To System USB USB SMB329 SMB339 Li-Ion System AC/DC 300-1800mA 4.5V-6.0V Figure 1 – Using the SMB329/339 to charge a single cell Li+ battery from USB or AC Adapter power sources. © SUMMIT Microelectronics, Inc. 2004 • 757 N. Mary Avenue • Sunnyvale CA 94085 • Phone 408 523-1000 • FAX 408 523-1266 http://www.summitmicro.com/ 2132 2.6 5/5/2009 D+ NC GND ADC I2C USB 1