AMR14A2-A

Part Number: AMR14A2-A www.SunLED.com 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY Features ● 0.54 INCH CHARACTER HEIGHT. ●LOW CURRENT OPERATION. ●HIGH CONTRAST AND LIGHT OUTPUT. ● EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ● CATEGORIZED FOR LUMINOUS INTENSITY. ● MECHANICALLY RUGGED. ● STANDARD: GRAY FACE, WHITE SEGMENT. ● RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Per Segment or (DP) Forward Current Per Segment or (DP) Forward Current (Peak) Per Segment or (DP) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Per Segment or (DP) Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Part Number Emitting Color VR IF MR (GaAlAs) 5 30 Unit V mA Operating Characteristics (TA=25°C) Forward Voltage (Typ.) Per Segment or (DP) (IF=10mA) Forward Voltage (Max.) Per Segment or (DP) (IF=10mA) Reverse Current (Max.) Per Segment or (DP) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=10mA) Wavelength of Dominant Emission (Typ.) (IF=10mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF MR (GaAlAs) 1.8 Unit V VF 2.5 V IR 10 uA λP 660 nm iFS 155 mA λD 640 nm PT TA Tstg 75 -40 ~ +85 -40 ~ +85 mW °C Δλ 20 nm C 45 pF 260°C For 3 –5 Seconds Luminous Intensity (IF=10mA) ucd min. Emitting Material Wavelength nm λP Description typ. 17990 660 Common Anode. Rt. Hand Decimal AMR14A2-A Red GaAlAs 4700 Published Date : MAR 13,2008 Drawing No : SDSA2372 V3 Checked : Shin Chi P.1/4 Part Number: AMR14A2-A www.SunLED.com 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY MR Published Date : MAR 13,2008 Drawing No : SDSA2372 V3 Checked : Shin Chi P.2/4 Part Number: AMR14A2-A www.SunLED.com 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY AMR14A2-A Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 13,2008 Drawing No : SDSA2372 V3 Checked : Shin Chi P.3/4 Part Number: AMR14A2-A www.SunLED.com 13.8mm (0.54”) 14 SEGMENT DUAL DIGIT ALPHANUMERIC DISPLAY PACKING & LABEL SPECIFICATIONS AMR14A2-A R. CHE N 數位簽署者：R. CHEN DN：cn=R. CHEN, o=SPEC 專用, ou=SPEC專 用, email=fangdh@c n.kingbright.com, c= 日期︰2008.03.15 14:36:28 +08'00' Published Date : MAR 13,2008 Drawing No : SDSA2372 V3 Checked : Shin Chi P.4/4