LUG11C

www.SunLED.com Part Number: LUG11C T-1 (3mm) SOLID STATE LAMP Features R. CH ●LOW POWER CONSUMPTION. EN ●POPULAR T-1 DIAMETER PACKAGE. ●GENERAL PURPOSE LEADS. ●RELIABLE AND RUGGED. 數位簽署者：R.CHEN DN：cn=R.CHEN, o=SPEC專用, ou=SPEC 專用, email=fangdh@cn. kingbright.com, c= 日期︰2008.03.20 19:32:03 +08'00' ●LONG LIFE - SOLID STATE RELIABILITY. ●AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg UG (GaP) 5 25 140 62.5 -40 ~ +85 -40 ~ +85 260°C For 3 Seconds 260°C For 5 Seconds Unit V mA mA mW °C Operating Characteristics (TA=25°C) Forward Voltage (Typ.) (IF=10mA) Forward Voltage (Max.) (IF=10mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=10mA) Wavelength of Dominant Emission (Typ.) (IF=10mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=10mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR UG (GaP) 2.0 2.5 10 Unit V V uA λP 565 nm λD 568 nm Δλ 30 nm C 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=10mA) mcd min. typ. 59 Wavelength nm λP Viewing Angle 2 θ 1/2 LUG11C Green GaP Green Transparent 18 565 34° Published Date : MAR 20,2008 Drawing No : SDSA4759 V2 Checked : B.L.LIU P.1/4 www.SunLED.com Part Number: LUG11C T-1 (3mm) SOLID STATE LAMP UG Published Date : MAR 20,2008 Drawing No : SDSA4759 V2 Checked : B.L.LIU P.2/4 www.SunLED.com Part Number: LUG11C T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 20,2008 Drawing No : SDSA4759 V2 Checked : B.L.LIU P.3/4 www.SunLED.com Part Number: LUG11C T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS LUG11C Published Date : MAR 20,2008 Drawing No : SDSA4759 V2 Checked : B.L.LIU P.4/4