XBMR34D

Part Number: XBMR34D T-1 (3mm) BLINKING LED LAMP Package Schematics Features ● 3mm package with built-in blinking IC ● Blinking frequency range: 3.0Hz to 1.5Hz ● Operation voltage range: 3.5V to 14V ● RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MR (GaAlAs) Unit Reverse Voltage VR 0.5 V Forward Voltage VF 14 V Power Dissipation PD 310 Operating Temperature TA -40 ~ +70 Tstg -40 ~ +85 Storage Temperature Operating Characteristics (TA=25°C) IF 8 mA mW Forward Current (Typ.) (VF=5V) IF 22 mA °C Supply Current (Typ.) (VF=3.5V) ISON 8 mA ISON 44 mA f 1.5~3 Hz Wavelength of Peak Emission CIE127-2007* (Typ.) λP 655* nm Wavelength of Dominant Emission CIE127-2007* (Typ.) λD 640* nm Spectral Line Full Width At Half-Maximum (Typ.) △λ 20 nm 260°C For 3 Seconds Supply Current (Typ.) (VF=14V ) Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Blink Frequency (Min.~Max.) (VF=3.5V~14V) XBMR34D Emitting Color Red Unit Forward Current (Min.) (VF=3.5V) Lead Solder Temperature [2mm Below Package Base] Part Number MR (GaAlAs) Emitting Material GaAlAs Lens-color Red Diffused Luminous Intensity CIE127-2007* (VF=9V) mcd min. typ. 120 40* 317 98* Wavelength CIE127-2007* nm λP Viewing Angle 2θ 1/2 655* 60° *Luminous intensity value and wavelength are in accordance with CIE127-2007 standards. Dec 20,2013 XDSA2643 V6-X Layout: Maggie L. P. 1/3 Part Number: XBMR34D T-1 (3mm) BLINKING LED LAMP  MR Dec 20,2013 XDSA2643 V6-X Layout: Maggie L. P. 2/3 Part Number: XBMR34D T-1 (3mm) BLINKING LED LAMP PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp Dec 20,2013   XDSA2643 V6-X Layout: Maggie L. P. 3/3