XZVS54S-9C

Part Number: XZVS54S-9C 2.0 x 1.25 mm UV LED With Ceramic Substrate Features ● 2.0 mm x 1.25 mm x 0.75 mm SMD LED ● Low power consumption ● Wide viewing angle ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES ● Standard Package: 2,000pcs / Reel ● MSL (Moisture Sensitivity Level): 1 ● Halogen-free ● RoHS compliant Package Schematics Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Jan 13,2021 XDSB9118 V2-Z Layout: Maggie L. P. 1/6 Part Number: XZVS54S-9C 2.0 x 1.25 mm UV LED With Ceramic Substrate Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. Jan 13,2021 XDSB9118 V2-Z Layout: Maggie L. P. 2/6 Part Number: XZVS54S-9C 2.0 x 1.25 mm UV LED With Ceramic Substrate Part Number Emitting Color (Material) XZVS54S-9C Radiant Flux CIE127-2007* (IF=20mA) Φe=mW [2] Lens-color Ultraviolet (InGaN) Viewing Angle 2θ 1/2[1] min. typ. 10* 15* Water Clear 150° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant flux: +/-15%. *Radiant flux is in accordance with CIE127-2007 standards. Electrical / Optical Characteristics at TA=25°C Parameter Value Symbol 380* Wavelength at Peak Emission IF = 20mA CIE127-2007* [Min.] Wavelength at Peak Emission IF = 20mA CIE127-2007* [Typ.] 385* λpeak Wavelength at Peak Emission IF = 20mA CIE127-2007* [Max.] Spectral Bandwidth at 50% Φ REL MAX IF = 20mA [Typ.] Unit nm 390* ∆λ 12 Forward Voltage IF = 20mA [Typ.] nm 3.3 VF [1] V Forward Voltage IF = 20mA [Max.] 3.8 Reverse Current (VR = 5V) [Max.] Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 85°C IR 50 µA TCV -3.0 mV/°C Notes: 1. Forward voltage: ±0.1V. * wavelength is in accordance with CIE127-2007 standards. Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power Dissipation PD 120 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 mA IFM [2] 100 mA Thermal Resistance (Junction / Ambient) Rth j-a [1] 100 °C/W Thermal Resistance (Junction / Solder point) Rth j-s [1] 50 °C/W Peak Forward Current Notes: 1. Rt h j-a ,Rt h j-s Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/ JESD625-A and JEDEC/J-STD-033) Jan 13,2021 XDSB9118 V2-Z Layout: Maggie L. P. 3/6 Part Number: XZVS54S-9C 2.0 x 1.25 mm UV LED With Ceramic Substrate Relative Radiant Intensity 100% Ta = 25 °C 0° 15° Ta = 25 °C 80% 1.0 30° 45° 60% 40% 60° 0.5 20% 75° 0% 300 315 330 345 360 375 390 Wavelength (nm) 405 420 435 450 90° 0° Relative Intensity Vs. CIE Wavelength 15° 30° 45° 60° 75° 0.0 90° Spatial Distribution 2.5 Radiant flux normalised at 20 mA Forward current (mA) T a = 25 °C 40 30 20 10 0 2.7 T a = 25 °C 2 1.5 1 0.5 0 2.9 3.1 3.3 3.5 Forward voltage (V) Forward Current vs. Forward Voltage 3.7 0 10 20 30 40 Forward current (mA) Radiant Flux vs. Forward Current 50 50 2.5 Radiant fluxnormalised at T a = 25 °C 50 Permissible forward current (mA)
Ultraviolet 40 30 20 10 0 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Forward Current Derating Curve -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Radiant Flux vs. Ambient Temperature LED is recommended for reflow soldering and soldering profile is shown below. Jan 13,2021 XDSB9118 V2-Z Layout: Maggie L. P. 4/6 Part Number: XZVS54S-9C 2.0 x 1.25 mm UV LED With Ceramic Substrate
The device has a single mounting surface. The device must be mounted according to the specifications.
Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1)
Reel Dimension (Units : mm)
Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Jan 13,2021 XDSB9118 V2-Z Layout: Maggie L. P. 5/6 Part Number: XZVS54S-9C 2.0 x 1.25 mm UV LED With Ceramic Substrate PACKING & LABEL SPECIFICATIONS TERMS OF USE 1. Data presented in this document reflect statistical figures and should be treated as technical reference only. 2. Contents within this document are subject to improvement and enhancement changes without notice. 3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. User accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life. 5. The contents within this document may not be altered without prior consent by SunLED. 6. Additional technical notes are available at https://www.SunLEDusa.com/TechnicalNotes.asp Jan 13,2021 XDSB9118 V2-Z Layout: Maggie L. P. 6/6