SMD POWER INDUCTORS
1. PART NO. EXPRESSION :
PDB1608 SERIES
PDB16081R0MZF
(a) (b) (c) (d)(e)(f)
(a) Series code (b) Dimension code (c) Inductance code : 1R0 = 1.0uH
(d) Tolerance code : M = ±20% (e) X, Y, Z : Standard part (f) F : RoHS Compliant
2. CONFIGURATION & DIMENSIONS :
B C F G I J I
101
D
A
E
PCB Pattern
Epoxy
H
Unit:m/m C D 3.94 Ref. E 4.32 Ref. F 1.02 Ref. G 1.27 Ref. H 3.56 Ref. I 1.40 Ref. J 4.06 Ref.
A
B
6.60 Max. 4.45 Max. 2.92 Max.
3. SCHEMATIC :
4. MATERIALS : c (a) Wire (b) Base a b d (c) Ink (d) Epoxy
5. GENERAL SPECIFICATION : a) Test Frequency : 100KHz, 0.1Vrms, 0Adc b) L/L0A : 10% Typ. at Idc c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +85°C
NOTE : Specifications subject to change without notice. Please check our website for latest information.
11.05.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
SMD POWER INDUCTORS
6. ELECTRICAL CHARACTERISTICS : Part No. PDB16081R0MZF PDB16081R5MZF PDB16082R2MZF PDB16082R7MZF PDB16083R3MZF PDB16084R7MZF PDB16086R8MZF PDB16088R2MZF PDB1608100MZF PDB1608150MZF PDB1608220MZF PDB1608330MZF PDB1608470MZF PDB1608680MZF PDB1608101MZF PDB1608151MZF PDB1608221MZF PDB1608331MZF PDB1608471MZF PDB1608681MZF PDB1608102MZF Inductance ( µH ) 1.0±20% 1.5±20% 2.2±20% 2.7±20% 3.3±20% 4.7±20% 6.8±20% 8.2±20% 10.0±20% 15.0±20% 22.0±20% 33.0±20% 47.0±20% 68.0±20% 100.0±20% 150.0±20% 220.0±20% 330.0±20% 470.0±20% 680.0±20% 1000.0±20% Test Frequency ( Hz ) 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K 0.1V/100K
PDB1608 SERIES
RDC (m ) Max. 50 60 70 80 80 90 130 160 160 230 370 510 640 860 1270 2000 3110 3800 5060 9200 13800 IDC (A) Max. 2.90 2.60 2.30 2.10 2.00 1.50 1.20 1.15 1.10 0.90 0.70 0.58 0.50 0.40 0.31 0.27 0.22 0.18 0.16 0.14 0.10
Peak Temp : 260°C max. Max time above 230°C : 50sec max. Max time above 200°C : 70sec max. Temp. Rising Area
+40°C/sec max.
Preheat Area
Reflow area
+2.0~ 4.0°C/ sec max.
Forced Cooling Area
-(1.0~5.0)°C/sec max. Peak temperature 260°C 230°C
150~200°C/60~120sec
Temperature (°C)
250 200 150 100 50 0 50 100 150
50sec max. 70sec max.
200
250
Time (seconds)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
11.05.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
SMD POWER INDUCTORS
7. CHARACTERISTICS CURVES :
INDUCTANCE CURVE VS. CURRENT
9.00
PDB1608 SERIES
INDUCTANCE (uH)
8.00 7.00 6.00 5.00 4.00 3.00 2.00 1.00 0.00 0A 0.5A 1.15A 1.5A 2A 2.5A 3A
DC CURRENT( A) DC CURRENT (A)
T EMPERATURE RISE CURVE VS. CURRENT
TEMPERATURE RISE (°C) 70.00 60.00 50.00 40.00 30.00 20.00 10.00 0.00 0A 0.4A 0.8A 1 5A .1 1 .6A 2.0A
DC CURRENT( A) DC CURRENT (A)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
11.05.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 3
SMD POWER INDUCTORS
PDB1608 SERIES
8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION
B
STYLE
D C
A 16.5
B 2.3
C 100
D 330
13-16
A
P2
8.0±0.1
Po
1 .5
±0
E
.1
0.35±0.05
F
4.55±0.1
3.2±0.1
( 2 ) DIMENSIONS STYLE 13-16 E 1.75±0.1 F 7.5±0.1 P2 2.0±0.1 Po 4.0±0.1 W 16.0±0.3
( 3 ) Q'TY & G.W. PER PACKAGE Reel SERIES PDB1608 Qty 2000 Reel 3 Inner Carton Qty (pcs) 6000 Size (mm) 345x340x70 Reel 6 Outer Carton Qty (pcs) 12000 Size (mm) 360x350x156
NOTE : Specifications subject to change without notice. Please check our website for latest information.
6.9±0.1
W
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
101
101
101
101
101
11.05.2010
SMD POWER INDUCTORS
PDB1608 SERIES
(4) Tearing Off Force F
165° to 180°
The force for tearing off cover tape is 5 to 120 grams in the arrow direction under the following conditions.
Room Temp. (°C) 5~35 Room Humidity (%) 45~85 Room atm (hPa) 860~1060 Tearing Speed (mm/min) 300
Top cover tape
Base tape
Application Notice
1. Storage Conditions : To maintain the solderabililty of terminal electrodes : a) Temperature and humidity conditions : Less than 40°C and 70% RH. b) Recommended products should be used within 6 months from the time of delivery. c) The packaging material should be kept where no chlorine or sulfur exists in the air. 2. Transportation : a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) Bulk handling should ensure that abrasion and mechanical shock are minimized.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
11.05.2010
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
很抱歉,暂时无法提供与“PDB16082R7MZF”相匹配的价格&库存,您可以联系我们找货
免费人工找货