SMD POWER INDUCTORS
1. PART NO. EXPRESSION :
SDB1205 SERIES
SDB12051R5YZF
(a) (b) (c) (d)(e)(f)
(a) Series code (b) Dimension code (c) Inductance code : 1R5 = 1.5uH
(d) Tolerance code : M = ±20%, Y = ±25% (e) X, Y, Z : Standard part (f) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
B C E F I G I
A 12.5±0.3
3. SCHEMATIC :
4. MATERIALS : (a) Core : DR Ferrite Core h a d g b e (b) Core : SI Ferrite Core (c) Base : LCP (d) Wire : Enamelled Copper Wire (e) Tape : Mylar Tape (f) Terminal : Tinned Copper Plate f c (g) Adhesive : Epoxy (h) Ink : Bon Margue
5. GENERAL SPECIFICATION : a) Temp. rise : 40°C Max. b) Rated current : Base on temp. rise & L/L0A = 20% Max. c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +80°C e) Resistance to solder heat : 260°C.10secs
NOTE : Specifications subject to change without notice. Please check our website for latest information.
101
B 12.5±0.3 C 6.00 Max.
D
A
PCB Pattern Unit:m/m D 5.0±0.2 E 2.2±0.2 F 7.6±0.2 G 7.0 Ref. H 5.4 Ref. I 2.8 Ref.
H
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
SMD POWER INDUCTORS
6. ELECTRICAL CHARACTERISTICS : Part No. SDB12051R5YZF SDB12052R2YZF SDB12053R1YZF SDB12054R4YZF SDB12055R2YZF SDB12057R5YZF SDB1205100MZF SDB1205120MZF SDB1205150MZF SDB1205180MZF SDB1205220MZF SDB1205270MZF SDB1205330MZF SDB1205390MZF SDB1205470MZF SDB1205560MZF SDB1205680MZF SDB1205820MZF SDB1205101MZF SDB1205121MZF SDB1205151MZF SDB1205181MZF SDB1205221MZF SDB1205271MZF SDB1205331MZF SDB1205391MZF SDB1205471MZF SDB1205561MZF SDB1205681MZF SDB1205821MZF SDB1205102MZF Inductance ( µH ) 1.5±25% 2.2±25% 3.1±25% 4.4±25% 5.2±25% 7.5±25% 10.0±20% 12.0±20% 15.0±20% 18.0±20% 22.0±20% 27.0±20% 33.0±20% 39.0±20% 47.0±20% 56.0±20% 68.0±20% 82.0±20% 100.0±20% 120.0±20% 150.0±20% 180.0±20% 220.0±20% 270.0±20% 330.0±20% 390.0±20% 470.0±20% 560.0±20% 680.0±20% 820.0±20% 1000.0±20% Test Frequency ( Hz ) 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K
SDB1205 SERIES
RDC (m ) Max. 12 14 17 20 21 24 25 27 30 34 36 51 57 68 75 110 120 140 160 170 230 290 400 460 510 690 770 860 1200 1340 1530
IDC (A) Max. 8.00 7.00 6.00 5.00 4.40 4.20 4.00 3.50 3.30 3.00 2.80 2.30 2.10 2.00 1.80 1.70 1.50 1.40 1.30 1.10 1.00 0.90 0.80 0.75 0.68 0.65 0.58 0.54 0.48 0.43 0.40
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
SMD POWER INDUCTORS
7. CHARACTERISTICS CURVES :
SDB1205 SERIES
@ TEMP. RISE VS. DC SUPERPOSITION RESPONSE CURVE
90 80 70 60 50
102M 331M 101M 100M 1R5Y
t (°C) 40
30 20 10 00 1 2 3 4 5 6 7 8 9 10 11
DC CURRENT (A)
@ INDUCTANCE VS. FREQUENCY RESPONSE CURVE
104 5 3 103 5 3
331M 102M
@ INDUCTANCE VS. DC SUPERPOSITION RESPONSE CURVE
104 5 3 103 5 3 102
102M
331M
101M
L (uH)
102 5 3 101 5 3
101M
L (uH)
5 3 101 5 3 0 10 5 3 10-1 10-3
1R5Y 100M
100M
1R5Y
0 10 10-3
35
10-2 3 5
10-1
35
100 3 5
101
35
102
35
10-2 3 5
10-1
35
100 3 5
101
35
102
FREQUENCY(MHZ)
DC CURRENT (A)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 3
SMD POWER INDUCTORS
RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS
10s max.
SDB1205 SERIES
255°C 230°C 180°C 150°C
Pre-heating 40s max.
Natural cooling
90 to 120s
8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE 2.0±0.5
ØC
ØC
N
A
B
D
G
EMBOSSED CARRIER * CARRIER TAPE WIDTH : D
P:16 m/m
4 m/m
101
( 2 ) DIMENSIONS STYLE 13-24 A 330 B
101
101
101
101
Unit:m/m
C 13±0.5
D 24
G 26 +0
N 50 -0
T 30.4
21±0.8
( 3 ) Q'TY & G.W. PER PACKAGE INNER : REEL SERIES SDB1205 Q'TY (PCS) 600 G.W. (gw) 1900 STYLE 13-24 OUTER : CARTON Q'TY (PCS) 2400 G.W. (Kg) 11.1 SIZE (cm) 40 x 40 x 24
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
SMD POWER INDUCTORS
9. RELIABILTY AND TEST CONDITION :
SDB1205 SERIES
TEST ITEM
SOLDERABILITY
SPECIFICATION
MORE THAN 90% OF THE TERMINAL ELECTRODE SHALL BE COVERED WITH FRESH SOLDER.
TEST CONDITION
PREHEAT : 125±25°C FOR 60 SECONDS SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SOLDER TEMP. : 245±5°C FLUX : ROSIN DIP TIME : 4±1 SECONDS
THERMAL SHOCK TEST
INDUCTANCE SHALL NOT CHANGE MORE THAN ±20%
ROOM TEMP. 15 MINUTES
-25±2°C 30 MINUTES
( TEMP. CYCLE )
ROOM TEMP. 15 MINUTES TOTAL : 50 CYCLES
85±2°C 30 MINUTES
HUMIDITY RESISTANCE TEST
TEMPERATURE : 40±2°C HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS
HIGH TEMP. RESISTANCE TEST
TEMPERATURE : 85±2°C APPLIED CURRENT : PER SPEC. TIME : 500 HOURS
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
SMD POWER INDUCTORS
10. UL CARD :
SDB1205 SERIES
GUANGDONG CHINA
Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI
E54705 (M)
RTI H D Min UL94 Elec Mech H H V 4 C A T 9 T Thk Flame with w/o W Mtl Dsg Col mm Class Imp Imp I I R 5 I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd)
E4008 , E400X NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 0 0 1 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ ___ ___ ___ ___ ___
___ ___ ___
E4008
NC , WT , BK
0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0
5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5
4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4
E4010
NC , BK
E400(Y)L , E4008L
NC , BK
E4810
NC , BK
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 6
SMD POWER INDUCTORS
10. UL CARD :
SDB1205 SERIES
TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN
E56086 (S)
Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530F°rated 150 C. polyester film tape, Cat. Nos. 631S°, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F°, rated 130 C. + - Subjected to Flame Retardant tests only. °- Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package.
( A card )
____________
R
D11/0114874 51
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 7