SPB07042R2YZF-11

SMD POWER INDUCTORS 1. PART NO. EXPRESSION : SPB0704 SERIES (e) Z : Standard part (f) F : RoHS Compliant (g) 11 ~ 99 : Internal controlled number SPB0704100MZF(a) (b) (c) (d)(e)(f) (g) (a) Series code (b) Dimension code (c) Inductance code : 100 = 10uH (d) Tolerance code : M = ±20%, Y = ±30% 2. CONFIGURATION & DIMENSIONS : A C 0.90 E F 4.30 D1 2 1 3 D B 0.90 4 1.45 1.45 PCB Pattern White dot on Pin 1 side A B C D 2.70 Ref. D1 0.70 Ref. E 1.25 Ref. Unit:m/m F 4.50 Ref. 7.30±0.20 7.60±0.20 4.45 Max. 3. SCHEMATIC : 1 N1 3 " " Polarity N2 4 3 ( Parallel ) 2 1 N1 N2 4 2 1 N1 3 ( Series ) 2 N2 4 4. MATERIALS : (a) Core : DR Ferrite Core h a d g b e (b) Core : RI Ferrite Core (c) Base : LCP-E4008 (d) Wire : Enamelled Copper Wire (e) Tape : #56 (f) Terminal : Tinned Copper Plate f c (g) Adhesive : Epoxy Resin (h) Ink : Bon Marque NOTE : Specifications subject to change without notice. Please check our website for latest information. 2.9 100 17.12.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS 5. GENERAL SPECIFICATION : a) L/L0A : 30% Typ. at Isat b) Temp. Rise : 40°C Typ. at Irms c) Hi-Pot (N1-N2) : 200Vac / 3mA / 1sec d) Operating temp. : -40°C to +125°C e) Storage temp. : -40°C to +125°C f) Resistance to solder heat : 260°C.10secs SPB0704 SERIES 6. ELECTRICAL CHARACTERISTICS : Inductance ( µH ) Ref. 0.80 1.50 2.20 3.30 4.70 6.80 8.20 10.0 15.0 22.0 33.0 47.0 68.0 82.0 100.0 150.0 220.0 330.0 470.0 680.0 820.0 1000.0 Test Frequency ( Hz ) 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K 0.25V/100K Inductance ( µH ) Ref. 0.752 1.422 1.986 3.396 5.182 7.344 8.566 9.882 16.090 21.730 33.010 49.640 69.670 80.950 101.600 150.000 227.000 335.600 465.300 671.200 812.700 1009.000 Parallel RDC Isat () (A) Max. 0.0132 0.0188 0.0204 0.0258 0.0354 0.0492 0.0564 0.0606 0.0948 0.1272 0.2052 0.2940 0.4056 0.4920 0.5736 0.8352 1.2192 2.1720 2.6520 4.2480 4.6680 5.1840 10.20 7.00 6.60 5.20 4.37 3.50 3.20 3.05 2.40 1.95 1.60 1.32 1.18 1.09 0.96 0.78 0.65 0.53 0.46 0.37 0.35 0.31 Series Irms (A) 5.33 4.96 4.66 3.94 3.34 2.60 2.53 2.41 2.00 1.75 1.30 1.05 0.95 0.83 0.75 0.60 0.50 0.40 0.35 0.28 0.26 0.24 Inductance ( µH ) Ref. 3.008 5.688 7.944 13.580 20.730 29.380 34.260 39.530 64.360 86.920 132.000 198.600 278.700 323.800 406.400 600.000 908.000 1342.000 1861.000 2685.000 3251.000 4036.000 RDC () Max. 0.0528 0.0752 0.0816 0.1032 0.1416 0.1968 0.2256 0.2424 0.3792 0.5088 0.8208 1.1760 1.6224 1.9680 2.2944 3.3408 4.8768 8.6880 10.6080 16.9920 18.6720 20.7360 Isat (A) 5.10 3.80 3.38 2.50 2.15 1.75 1.58 1.50 1.20 1.02 0.81 0.67 0.59 0.55 0.48 0.39 0.32 0.25 0.22 0.175 0.17 0.16 Irms (A) 2.660 2.480 2.330 1.970 1.670 1.300 1.270 1.200 1.000 0.874 0.650 0.525 0.475 0.415 0.375 0.300 0.250 0.200 0.175 0.140 0.130 0.120 Part No. SPB0704R80YZFSPB07041R5YZFSPB07042R2YZFSPB07043R3YZFSPB07044R7YZFSPB07046R8YZFSPB07048R2YZFSPB0704100MZFSPB0704150MZFSPB0704220MZFSPB0704330MZFSPB0704470MZFSPB0704680MZFSPB0704820MZFSPB0704101MZFSPB0704151MZFSPB0704221MZFSPB0704331MZFSPB0704471MZFSPB0704681MZFSPB0704821MZFSPB0704102MZFTolerance code : M = ±20% Y = ±30% NOTE : Specifications subject to change without notice. Please check our website for latest information. 17.12.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS 7. CHARACTERISTICS CURVES : ( PARALLEL ) SPB0704 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. 17.12.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS 7. CHARACTERISTICS CURVES : ( SERIES ) SPB0704 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. 17.12.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS SPB0704 SERIES 10s max. RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 255°C 230°C 180°C 150°C Pre-heating 40s max. Natural cooling 90 to 120s 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE 2.0±0.5 ØC ØC N A B D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:12 m/m 4 m/m 100 ( 2 ) DIMENSIONS STYLE 13-16 A 330 B ( 3 ) Q'TY & G.W. PER PACKAGE SERIES SPB0704 Q'TY (PCS) 1000 717 21±0.8 INNER : REEL G.W. (gw) STYLE 13-16 NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 100 C 13 100 D 16 Q'TY (PCS) 6000 OUTER : CARTON G.W. (Kg) 7.9 SIZE (cm) 38 x 36.5 x 21 100 G 18 +0 100 Unit:m/m N 50 -0 T 22.4 17.12.2010 SMD POWER INDUCTORS 9. RELIABILTY AND TEST CONDITION : SPB0704 SERIES TEST CONDITION PREHEAT : 125±25°C FOR 60 SECONDS SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SOLDER TEMP. : 245±5°C FLUX : ROSIN DIP TIME : 4±1 SECONDS TEST ITEM SOLDERABILITY SPECIFICATION MORE THAN 90% OF THE TERMINAL ELECTRODE SHALL BE COVERED WITH FRESH SOLDER. THERMAL SHOCK TEST INDUCTANCE SHALL NOT CHANGE MORE THAN ±20% ROOM TEMP. 15 MINUTES -25±2°C 30 MINUTES ( TEMP. CYCLE ) ROOM TEMP. 15 MINUTES TOTAL : 50 CYCLES 85±2°C 30 MINUTES HUMIDITY RESISTANCE TEST TEMPERATURE : 40±2°C HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. RESISTANCE TEST TEMPERATURE : 85±2°C APPLIED CURRENT : PER SPEC. TIME : 500 HOURS 10. UL CARD : GUANGDONG CHINA Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI NOTE : Specifications subject to change without notice. Please check our website for latest information. 17.12.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 SMD POWER INDUCTORS 10. UL CARD : SPB0704 SERIES E54705 (M) RTI H D Min UL94 Elec Mech H H V 4 C T Thk Flame with W 9 T w/o A R mm Class Imp 5 I Mtl Dsg Col Imp I I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd) E4008 , E400X NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 0 0 1 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ E4008 NC , WT , BK 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 E4010 NC , BK E400(Y)L , E4008L NC , BK E4810 NC , BK TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN E56086 (S) Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530F°rated 150 C. polyester film tape, Cat. Nos. 631S°, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F°, rated 130 C. + - Subjected to Flame Retardant tests only. °- Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package. NOTE : Specifications subject to change without notice. Please check our website for latest information. 17.12.2010 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 7