TB0218A

TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: 5, 04, 2005 Product Name: SAW Filter 140 MHz SMD 19x6.5 mm TST Parts No.:TB0218A Rev.4 Customer Parts No.: Company: Division: Approved by : Date: Checked by: Approval by: Date: Andy Lee Francis Chen 5, 04, 2005 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com SAW Filter 140 MHz MODEL NO.: TB0218A A. MAXIMUM RATING: 1. Input Power Level：10 dBm 2. Operating Temperature: -40°C to 85°C 3. Storage Temperature: -40°C to 85°C B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: Item Center frequency, Fc Minimum Insertion Loss, IL Amplitude Ripple in Fc±0.12MHz,AR Group delay ripple in Fc±0.15MHz 1dB Bandwidth 40dB Bandwidth Relative attenuation (relative to min. IL) 110 MHz ~ Fc-1MHz Fc+1MHz ~ 170MHz dB dB 35 35 41 39 25 °C Min. MHz 139.915 dB MHz ns MHz MHz 0.4 Unit Type. 140 7 0.6 200 0.47 1.47 Max. 140.085 8 1.5 500 1.6 Note 1 REV. NO.4 RoHS Compliant Lead free Lead-free soldering TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.MEASUREMENT CIRCUIT: Input L1=39nH, L3=22nH Output L2=33nH, L4=22n D. FREQUENCY CHARACTERISTICS : Fig-1 S21 Response Horizontal: 0.5MHz/Div Vertical: 7dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Fig-2 Horizontal: 200KHz/Div Vertical: 1dB/Div Vertical: 100ns/Div E. OUTLINE DRAWING : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB FOOTPRINT G. TAPE DIMENSION 218 Inside of Reel 218 Outside of Reel Unit:mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 H. MECHANICAL & ENVIRONMENT CHARACTERISTICS Test Item Shock ( Drop test ) Condition of Test random free drops 3 times from height of 1.0 meter onto hard wood. Total peak amplitude : 1.5mm Vibration frequency : 10 to 55 Hz Sweep period : 1.0 minute Vibration directions : 3 mutually perpendicular Duration : 2 hr / direc. Requirements The specimens shall meet the electrical specifications Vibration Solderability immersed pad in soldering bath at 245±5°C for 5±0.5 seconds. Specimens shall be measured within -40°C to +85°C temperature range Temperature Duration Temperature Duration : 125 ± 2 °C : 250 hours : -40 ± 3 °C : 96 hours 75% or more of the immersed surface shall be covered with solder Temperature Characteristics Dry heat ( Aging test ) Cold resistance The specimens shall meet the electrical specifications Thermal Shock Heat cycle conditions -55 C 25 C (30 min) (5 min) Cycle time : 5 times 85 C (30 min) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 I. Reflow Profile: 1. Preheating shall be fixed at 140 ~ 160 ℃ for 60 ~ 90 seconds. 2. Ascending time to preheating temperature 150 ℃ shall be 30 seconds min. 3. Heating shall be fixed at 200 ℃ for 50 ~ 60 seconds and at 230±10 ℃ peak. IR-reflow Profile 260 240 220 200 180 Peak (240℃max) Go down Heating Preheating (140~160℃) (200℃) gradually Temp/degC 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Time/sec 30sec. min 60 ~ 90 sec. 50 ~ 60 sec. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7