TB0398A

TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Tao-Yuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com Approval Sheet for Product Specification Issued Date: Product Name: 325 MHz IF SAW Filter (SMD 7.0×5.0 mm) TST Parts No.: TB0398A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Approval by: Date: Andy Lee Francis Chen 2006,11,01 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales3@mail.taisaw.com Web: www.taisaw.com TAI-SAW TECHNOLOGY CO., LTD. SAW Filter 325MHz (SMD 7.0×5.0 mm) MODEL NO.: TB0398A A. MAXIMUM RATING: 1.Operating Temperature: -10°C to 60°C 2.Storage Temperature: -40°C to 85°C B. Characteristics : 1.Ambient Temperature : 23°C Item Center frequency, Fc Insertion Loss, IL Lower 3 dB Bandedge Upper 3 dB Bandedge Lower 40 dB Bandedge Upper 40 dB Bandedge Amplitude Ripple Phase Linearity (321~329 MHz) (320~330 MHz) Rev. No. 2 Unit MHz dB MHz MHz dB deg nsec dB dB dB dB dB dB dB Ohm Ohm ppm/oC - Min. 330.0 307.5 45 40 40 35 40 35 40 - Type. 325 9.6 318.3 331.3 312.8 337.4 0.4 5 24 50 46 48 48 51 49 48 50 50 -75 128 LiNbO3 Max. 14 320.0 342.5 1 75 Group Delay Ripple (320~330 MHz) Relative Attenuation 10 - 220 MHz 220 - 300 MHz 350 - 355 MHz 355 - 375 MHz 375 - 380 MHz 380 - 405 MHz 405 - 500 MHz Source Impedance Load Impedance Temperature Coefficient Substrate Material - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) S21 Response:(span 100MHz) Horizontal: 100MHz/Div (2) Pass band Response:(span 20MHz) Vertical: 10dB/Div Horizontal : 0.3MHz/Div Vertical 1: 1dB/Div Vertical 2: 100nS/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (3) Wide band Response:(span 400 MHz) Horizontal : 40MHz/Div Vertical : 10dB/Div D. Outline Drawing: 398 Pin D : Balanced Input + Pin C : Balanced Input Pin J : Blanced Onput + Pin I : Blanced Onput Pin A, B, E, F, G, H, K, L : To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Year 2005 2009 B 2006 2010 b 2007 2011 B 2008 2012 b Product Code E. TEST FIXTURE : F. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. 398 Direction of feet TST DCC Release document 6