Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2016. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual specification.
■ Please contact TAIYO YUDEN for further details of product specifications as the individual specification is available.
■ Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC). Please be sure to contact TAIYO YUDEN for further information
before using the products for any equipment which may directly cause loss of human life or bodily injury (e.g.,
transportation equipment including, without limitation, automotive powertrain control system, train control system,
and ship control system, traffic signal equipment, disaster prevention equipment, medical equipment, highly public
information network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment, nuclear control equipment, undersea equipment, military equipment).
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■ Please note that TAIYO YUDEN shall have no responsibility for any controversies or disputes that may occur in
connection with a third party’
s intellectual property rights and other related rights arising from use of our products.
TAIYO YUDEN grants no license for such rights.
■ Please note that unless otherwise agreed in writing, the scope of warranty for our products is limited to the
delivered our products themselves and TAIYO YUDEN shall not be in any way responsible for any damages
resulting from a fault or defect in our products.
■ The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter“TAIYO YUDEN’
s official sales channel”). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’s official sales
channel.
■ Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to“U.S. Export
Administration Regulations”
,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
17
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS
WAVE
WAVE
REFLOW
REFLOW
■PARTS NUMBER
J M K
① ② ③
3
1 6
④
CERAMIC CAPACITORS
①Rated voltage
Code
P
A
J
L
E
T
G
U
H
Q
S
②Series name
Code
M
V
W
△
⑤
B
J
1
⑥
0 6
⑦
M L － T △
⑧ ⑨ ⑩ ⑪ ⑫
③End termination
Code
K
S
Rated voltage［VDC］
2.5
4
6.3
10
16
25
35
50
100
250
630
A
Dimensions
（L×W）［mm］
021
0.25× 0.125
042
0.4 × 0.2
063
0.6 × 0.3
1.0 × 0.5
105
0.52× 1.0 ※
1.6 × 0.8
107
0.8 × 1.6 ※
2.0 × 1.25
212
1.25× 2.0 ※
316
3.2 × 1.6
325
3.2 × 2.5
432
4.5 × 3.2
Note : ※LW reverse type（□WK） only
Type
L［mm］
Standard
W［mm］
Standard
0.6±0.05
1.0±0.10
1.6＋0.15/－0.05
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
212
2.0＋0.15/－0.05
1.25＋0.15/－0.05
316
3.2±0.20
1.6±0.20
325
063
105
3.2±0.30
0.6±0.09
1.0＋0.15/－0.05
2.5±0.30
0.3±0.09
0.5＋0.15/－0.05
107
1.6＋0.20/－0
0.8＋0.20/－0
212
2.0＋0.20/－0
1.25＋0.20/－0
316
105
EIA（inch）
008004
01005
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
T［mm］
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
0.45±0.05
0.85±0.10
1.25＋0.15/－0.05
0.85±0.10
1.6±0.20
2.5±0.30
0.3±0.09
0.5＋0.15/－0.05
0.45±0.05
0.8＋0.20/－0
0.45±0.05
0.85±0.10
1.25＋0.20/－0
1.6±0.30
0.5＋0.20/－0
△= Blank space
B
C
End termination
Plated
Cu Internal Electrodes
④Dimension（L×W）
Series name
Multilayer ceramic capacitor
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
⑤Dimension tolerance
Code
Type
△
ALL
063
105
107
△＝Blank space
3.2±0.30
1.6±0.30
1.0＋0.20/－0
0.5＋0.20/－0
Note: P.6 Standard external dimensions
⑥Temperature characteristics code
■High dielectric type（Excluding Super low distortion multilayer ceramic capacitor）
Applicable
Temperature
Code
Ref. Temp.［℃］
Capacitance change
standard
range［℃］
JIS
B
－25～＋ 85
20
±10％
EIA
X5R
－55～＋ 85
25
±15％
B7
EIA
X7R
－55～＋125
25
±15％
C6
EIA
X6S
－55～＋105
25
±22％
C7
EIA
X7S
－55～＋125
25
±22％
LD(※)
EIA
X5R
－55～＋ 85
25
±15％
BJ
Note : ※.LD Low distortion high value multilayer ceramic capacitor
Capacitance
tolerance
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
Tolerance
code
K
M
K
M
K
M
K
M
K
M
K
M
△= Blank space
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
4
17
■Temperature compensating type
Applicable
Code
standard
CG
UJ
UK
C0G
JIS
UJ
EIA
JIS
EIA
JIS
U2J
UK
U2K
SL
Ref. Temp.［℃］
Capacitance change
－55～＋125
25
0±30ppm/℃
－55～＋125
－55～＋125
－55～＋125
－55～＋125
⑥Series code
・Super low distortion multilayer ceramic capacitor
Code
Series code
SD
Standard
・Medium-High Voltage Multilayer Ceramic Capacitor
Code
Series code
SD
Standard
⑦Nominal capacitance
Code
（example）
0R5
010
100
101
102
103
104
105
106
107
Note : R＝Decimal point
⑧Capacitance tolerance
Code
A
B
C
D
F
G
J
K
M
Z
Nominal capacitance
0.5pF
1pF
10pF
100pF
1,000pF
10,000pF
0.1μF
1.0μF
10μF
100μF
Capacitance tolerance
±0.05pF
±0.1pF
±0.25pF
±0.5pF
±1pF
±2％
±5％
±10％
±20％
＋80/－20％
20
25
20
25
20
Capacitance
tolerance
±0.05pF
±0.1pF
±0.25pF
±0.5pF
±5％
±0.25pF
±0.5pF
±5％
Tolerance
code
A
B
C
D
J
C
D
J
－750±250ppm/℃
±0.25pF
C
＋350～－1000ppm/℃
±5％
J
－750±120ppm/℃
⑨Thickness
Code
K
H
E
C
D
P
T
K
V
W
A
D
F
G
L
N
Y
M
⑩Special code
Code
－
⑪Packaging
Code
F
T
P
R
W
⑫Internal code
Code
△
CERAMIC CAPACITORS
SL
EIA
Temperature
range［℃］
Thickness［mm］
0.125
0.13
0.18
0.2
0.3
0.45（107type or more）
0.5
0.8
0.85（212type or more）
1.15
1.25
1.6
1.9
2.0 max
2.5
Special code
Standard
Packaging
φ178mm Taping （2mm pitch）
φ178mm Taping （4mm pitch）
φ178mm Taping （4mm pitch, 1000 pcs/reel）
325 type（Thickness code M）
φ178mm Taping （2mm pitch）105type only
（Thickness code E,H）
φ178mm Taping（1mm pitch）021/042type only
Internal code
Standard
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
c_mlcc_e-E05R01
5
■STANDARD EXTERNAL DIMENSIONS
W
Type( EIA )
T
e
L
Dimension [mm]
T
0.125±0.013
□MK021（008004）
L
0.25±0.013
W
0.125±0.013
□MK042（01005）
0.4±0.02
0.2±0.02
0.2±0.02
□VS042（01005）
0.4±0.02
0.2±0.02
0.2±0.02
□MK063（0201）
0.6±0.03
0.3±0.03
L
CERAMIC CAPACITORS
□MK105（0402）
1.0±0.05
0.5±0.05
□VK105（0402）
□WK105（0204）※
1.0±0.05
0.52±0.05
0.5±0.05
1.0±0.05
W
T
e
※ LW reverse type
□MK107（0603）
1.6±0.10
0.8±0.10
□WK107（0306）※
0.8±0.10
1.6±0.10
□MK212（0805）
2.0±0.10
1.25±0.10
□WK212（0508）※
1.25±0.15
2.0±0.15
□MK316（1206）
3.2±0.15
1.6±0.15
□MK325（1210）
3.2±0.30
2.5±0.20
□MK432（1812）
4.5±0.40
Note : ※. LW reverse type, *1.Thickness code
3.2±0.30
0.3±0.03
0.13±0.02
0.18±0.02
0.2±0.02
0.3±0.03
0.5±0.05
0.5±0.05
0.3±0.05
0.45±0.05
0.8±0.10
0.5±0.05
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.10
0.85±0.10
1.15±0.10
1.6±0.20
0.85±0.10
1.15±0.10
1.9±0.20
1.9＋0.1/－0.2
2.5±0.20
2.5±0.20
*1
K
C
D
C
P
T
H
E
C
P
V
W
P
K
A
V
K
D
G
D
D
F
L
D
F
N
Y
M
M
e
0.0675±0.0275
0.1±0.03
0.1±0.03
0.15±0.05
0.25±0.10
0.25±0.10
0.18±0.08
0.35±0.25
0.25±0.15
0.5±0.25
0.3±0.2
0.5＋0.35/－0.25
0.6±0.3
0.9±0.6
■STANDARD QUANTITY
Type
EIA（inch）
Dimension
021
008004
［mm］
0.125
042
01005
0.2
063
0201
0.3
105
0402
0.13
0.18
0.2
0.3
0.5
0204 ※
107
0603
0306 ※
212
0805
0508 ※
316
1206
325
1210
432
1812
Note : ※.LW Reverse type（□WK）
0.30
0.45
0.8
0.50
0.45
0.85
1.25
0.85
0.85
1.15
1.6
0.85
1.15
1.9
2.0 max
2.5
2.5
Code
K
C
D
P
T
H
E
C
P
V
W
P
K
A
V
K
D
G
D
D
F
L
D
F
N
Y
M
M
Standard quantity［pcs］
Paper tape
Embossed tape
－
50000
－
40000
15000
－
－
－
20000
15000
20000
15000
－
－
10000
－
4000
－
－
4000
4000
－
－
4000
4000
－
－
3000
－
－
3000
2000
－
2000
－
－
1000
500
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
6
17
■PARTS NUMBER
・ All the Multilayer Ceramic Capacitors of the catalog lineup are RoHS Compliant.
・ Capacitance tolerance code is applied to [] of part number.
Note)
*1 We may provide X7R/X7S for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact TAIYO YUDEN sales channels.
*3 The size standard should look at ④Dimension, ⑤Dimension tolerance, and ⑨Thickness, and P.6 Standard external dimensions.
Multilayer Ceramic Capacitors (High dielectric type)
●021TYPE
【Temperature Characteristic BJ : X5R】 0.125mm thickness（K）
Part number 1
Part number 2
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
X5R
16
6.3
4
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
220
470
1000
2200
4700
0.01
0.022
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
10
10
10
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
0.01
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
0.01
1500
2200
3300
4700
6800
0.01
0.022
0.047
0.1
0.047
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
5
5
5
5
5
5
10
10
10
10
10
10
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
200
200
200
200
200
200
200
150
150
150
150
150
150
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
100
150
220
330
470
680
1000
100
150
220
330
470
680
1000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
5
5
5
5
5
5
5
5
5
5
5
5
5
200
200
200
200
200
200
200
200
200
200
200
200
200
200
p
p
p
p
p
μ
μ
Thickness*3 [mm]
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
0.125±0.013
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
●042TYPE
【Temperature Characteristic BJ : B/X5R】 0.2mm thickness（C）
Part number 1
Part number 2
EMK042 BJ101[]C-W
EMK042 BJ151[]C-W
EMK042 BJ221[]C-W
EMK042 BJ331[]C-W
EMK042 BJ471[]C-W
EMK042 BJ681[]C-W
EMK042 BJ102[]C-W
EMK042 BJ152[]C-W
EMK042 BJ222[]C-W
EMK042 BJ332[]C-W
EMK042 BJ472[]C-W
EMK042 BJ682[]C-W
EMK042 BJ103[]C-W
LMK042 BJ101[]C-W
LMK042 BJ151[]C-W
LMK042 BJ221[]C-W
LMK042 BJ331[]C-W
LMK042 BJ471[]C-W
LMK042 BJ681[]C-W
LMK042 BJ102[]C-W
LMK042 BJ152[]C-W
LMK042 BJ222[]C-W
LMK042 BJ332[]C-W
LMK042 BJ472[]C-W
LMK042 BJ682[]C-W
LMK042 BJ103[]C-W
JMK042 BJ152[]C-W
JMK042 BJ222[]C-W
JMK042 BJ332[]C-W
JMK042 BJ472[]C-W
JMK042 BJ682[]C-W
JMK042 BJ103[]C-W
JMK042 BJ223[]C-W
JMK042 BJ473[]C-W
JMK042 BJ104[]C-W
AMK042 BJ473[]C-W
AMK042 BJ104[]C-W
Rated voltage
[V]
Temperature
characteristics
16
B
B
B
B
B
B
B
10
B
B
B
B
B
B
B
6.3
B
B
B
B
B
B
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
p
p
p
p
p
p
p
p
p
p
p
p
μ
p
p
p
p
p
p
p
p
p
p
p
p
μ
p
p
p
p
p
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
EMK021 BJ221[]K-W
EMK021 BJ471[]K-W
EMK021 BJ102[]K-W
JMK021 BJ222[]K-W
JMK021 BJ472[]K-W
JMK021 BJ103[]K-W
AMK021 BJ223MK-W
Rated voltage
[V]
【Temperature Characteristic B7 : X7R】 0.2mm thickness（C）
Part number 1
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
LMK042
LMK042
LMK042
LMK042
LMK042
LMK042
LMK042
B7101[]C-W
B7151[]C-W
B7221[]C-W
B7331[]C-W
B7471[]C-W
B7681[]C-W
B7102[]C-W
B7101[]C-W
B7151[]C-W
B7221[]C-W
B7331[]C-W
B7471[]C-W
B7681[]C-W
B7102[]C-W
Part number 2
Rated voltage
[V]
16
10
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
p
p
p
p
p
p
p
p
p
p
p
p
p
p
HTLT
Thickness*3 [mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
7
■PARTS NUMBER
●063TYPE
【Temperature Characteristic BJ : B/X5R】 0.3mm thickness（P）
Part number 1
Part number 2
CERAMIC CAPACITORS
UMK063 BJ101[]P-F
UMK063 BJ151[]P-F
UMK063 BJ221[]P-F
UMK063 BJ331[]P-F
UMK063 BJ471[]P-F
UMK063 BJ681[]P-F
UMK063 BJ102[]P-F
UMK063 BJ152[]P-F
UMK063 BJ222[]P-F
UMK063 BJ332[]P-F
UMK063 BJ472[]P-F
UMK063 BJ682[]P-F
UMK063 BJ103[]P-F
GMK063 BJ104[]P-F
TMK063 BJ152[]P-F
TMK063 BJ222[]P-F
TMK063 BJ332[]P-F
TMK063 BJ472[]P-F
TMK063 BJ682[]P-F
TMK063 BJ103[]P-F
TMK063 BJ223[]P-F
TMK063ABJ104[]P-F
EMK063 BJ152[]P-F
EMK063 BJ222[]P-F
EMK063 BJ332[]P-F
EMK063 BJ472[]P-F
EMK063 BJ682[]P-F
EMK063 BJ103[]P-F
EMK063 BJ223[]P-F
EMK063 BJ333[]P-F
EMK063 BJ473[]P-F
EMK063 BJ683[]P-F
EMK063 BJ104[]P-F
EMK063 BJ224[]P-F
LMK063 BJ223[]P-F
LMK063 BJ333[]P-F
LMK063 BJ473[]P-F
LMK063 BJ683[]P-F
LMK063 BJ104[]P-F
LMK063 BJ224[]P-F
LMK063BBJ105MPLF
JMK063 BJ223[]P-F
JMK063 BJ333[]P-F
JMK063 BJ473[]P-F
JMK063 BJ683[]P-F
JMK063 BJ104[]P-F
JMK063 BJ224[]P-F
JMK063 BJ334MP-F
JMK063 BJ474[]P-F
JMK063ABJ105[]P-F
AMK063 BJ224[]P-F
AMK063 BJ334MP-F
AMK063 BJ474[]P-F
AMK063ABJ105[]P-F
Rated voltage
[V]
50
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
35
25
16
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
10
B
6.3
4
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
0.01
0.1
1500
2200
3300
4700
6800
0.01
0.022
0.1
1500
2200
3300
4700
6800
0.01
0.022
0.033
0.047
0.068
0.1
0.22
0.022
0.033
0.047
0.068
0.1
0.22
1
0.022
0.033
0.047
0.068
0.1
0.22
0.33
0.47
1
0.22
0.33
0.47
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
5
5
5
5
5
10
5
5
5
5
5
5
7.5
10
5
5
5
5
5
5
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
10
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
10
10
10
10
200
200
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
150
150
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.1
0.033
0.047
0.068
0.1
0.22
0.022
0.033
0.047
0.068
0.1
0.22
1
0.47
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
10
10
7.5
7.5
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
150
150
150
150
150
150
150
200
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
100
150
220
330
470
680
1000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
p
p
p
p
p
p
p
p
p
p
p
p
μ
μ
p
p
p
p
p
μ
μ
μ
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.09
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S】 0.3mm thickness（P）
Part number 1
Part number 2
TMK063 C6104[]P-F
EMK063AC6104[]P-F
LMK063 C6333[]P-F
LMK063 C6473[]P-F
LMK063 C6683[]P-F
LMK063 C6104[]P-F
LMK063 C6224[]P-F
JMK063 C6223[]P-F
JMK063 C6333[]P-F
JMK063 C6473[]P-F
JMK063 C6683[]P-F
JMK063 C6104[]P-F
JMK063 C6224[]P-F
JMK063BC6105MP-F
AMK063 C6474[]P-F
AMK063AC6105[]P-F
Rated voltage
[V]
Temperature
characteristics
25
16
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
10
6.3
4
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.09
0.3±0.03
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.3mm thickness（P）
Part number 1
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
B7101[]P-F
B7151[]P-F
B7221[]P-F
B7331[]P-F
B7471[]P-F
B7681[]P-F
B7102[]P-F
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
p
p
p
p
p
p
p
HTLT
Thickness*3 [mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
8
17
■PARTS NUMBER
Part number 1
TMK063
TMK063
TMK063
TMK063
TMK063
TMK063
EMK063
EMK063
EMK063
EMK063
EMK063
EMK063
EMK063
Part number 2
B7152[]P-F
B7222[]P-F
B7332[]P-F
B7472[]P-F
B7682[]P-F
B7103[]P-F
B7152[]P-F
B7222[]P-F
B7332[]P-F
B7472[]P-F
B7682[]P-F
B7103[]P-F
B7223[]P-F
Rated voltage
[V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
25
16
HTLT
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1500
2200
3300
4700
6800
0.01
1500
2200
3300
4700
6800
0.01
0.022
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
5
5
5
5
5
5
5
5
5
5
5
7.5
200
200
200
200
200
200
200
200
200
200
200
200
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
220
330
470
680
1000
1500
2200
3300
4700
6800
0.01
0.1
0.22
0.47
1
0.1
1
0.015
0.022
0.033
0.047
0.1
0.22
0.47
1
2.2
0.015
0.022
0.033
0.047
0.068
0.1
0.22
0.47
1
2.2
0.1
0.22
0.47
1
2.2
4.7
0.22
0.47
1
2.2
4.7
10
4.7
10
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±20
±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
10
10
10
5
10
3.5
3.5
3.5
3.5
5
10
10
10
10
3.5
3.5
3.5
3.5
5
5
5
10
10
10
5
5
10
10
10
10
5
10
10
10
10
10
10
10
200
200
200
200
200
200
200
200
200
150
200
150
150
150
150
150
150
200
200
150
150
150
200
200
150
150
200
200
200
200
200
150
150
150
150
150
200
150
150
150
150
150
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.01
0.1
0.22
0.47
0.47
1
1
2.2
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
10
5
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
p
p
p
p
p
μ
p
p
p
p
p
μ
μ
Thickness*3 [mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
●105TYPE
【Temperature Characteristic BJ : B/X5R】 0.5mm thickness（V）
Part number 1
UMK105 BJ221[]V-F
UMK105 BJ331[]V-F
UMK105 BJ471[]V-F
UMK105 BJ681[]V-F
UMK105 BJ102[]V-F
UMK105 BJ152[]V-F
UMK105 BJ222[]V-F
UMK105 BJ332[]V-F
UMK105 BJ472[]V-F
UMK105 BJ682[]V-F
UMK105 BJ103[]V-F
UMK105 BJ104[]V-F
UMK105 BJ224[]V-F
UMK105ABJ474[]V-F
UMK105CBJ105MV-F
GMK105 BJ104[]V-F
GMK105ABJ105[]V-F
TMK105 BJ153[]V-F
TMK105 BJ223[]V-F
TMK105 BJ333[]V-F
TMK105 BJ473[]V-F
TMK105 BJ104[]V-F
ＴMK105 BJ224[]V-F
ＴMK105ABJ474[]V-F
TMK105 BJ105[]V-F
TMK105CBJ225[]V-F
EMK105 BJ153[]V-F
EMK105 BJ223[]V-F
EMK105 BJ333[]V-F
EMK105 BJ473[]V-F
EMK105 BJ683[]V-F
EMK105 BJ104[]V-F
EMK105 BJ224[]V-F
EMK105ABJ474[]V-F
EMK105 BJ105[]V-F
EMK105ABJ225[]V-F
LMK105 BJ104[]V-F
LMK105 BJ224[]V-F
LMK105 BJ474[]V-F
LMK105 BJ105[]V-F
LMK105 BJ225[]V-F
LMK105BBJ475MVLF
JMK105 BJ224[]V-F
JMK105 BJ474[]V-F
JMK105 BJ105[]V-F
JMK105 BJ225[]V-F
JMK105BBJ475MV-F
JMK105CBJ106MV-F
AMK105ABJ475MV-F
AMK105CBJ106MV-F
Part number 2
Rated voltage
[V]
50
35
25
16
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
10
B
6.3
JMK105 BJ475MV-FD
AMK105 BJ475MV-F
4
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R*1
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
p
p
p
p
p
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5+0.20/-0
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5+0.20/-0
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5+0.20/-0
0.5±0.10
0.5+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
Capacitance
[F]
【Temperature Characteristic BJ : B/X5R】 0.3mm thickness（P）
Part number 1
UMK105 BJ104[]P-F
TMK105 BJ103[]P-F
TMK105 BJ104[]P-F
TMK105 BJ224[]P-F
TMK105 BJ474[]P-F
EMK105 BJ474[]P-F
LMK105 BJ105[]PLF
JMK105 BJ105[]P-F
AMK105 BJ225MP-F
Part number 2
Rated voltage
[V]
Temperature
characteristics
50
B
25
16
10
6.3
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
9
■PARTS NUMBER
【Temperature Characteristic BJ : X5R】 0.2mm thickness（C）
Part number 1
LMK105
JMK105
JMK105
JMK105
Part number 2
BJ104[]C-F
BJ224[]C-F
BJ474[]C-F
BJ105MC-F
Rated voltage
[V]
Temperature
characteristics
10
X5R
X5R
X5R
X5R
6.3
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
±20
±20
10
10
10
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
±10，±20
±10，±20
±20
±10，±20
±20
±10，±20
±20
±20
±20
10
10
10
10
10
10
10
10
10
10
150
150
150
150
200
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
220
330
470
680
1000
1500
2200
3300
4700
6800
0.01
0.022
0.047
0.1
1500
2200
3300
4700
6800
0.01
0.022
0.047
0.1
0.22
0.022
0.047
0.1
0.22
0.022
0.047
0.1
0.22
0.47
0.22
0.47
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
10
10
2.5
2.5
2.5
2.5
2.5
3.5
3.5
3.5
10
10
3.5
3.5
5
10
3.5
3.5
5
10
10
5
10
200
200
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
150
150
200
150
200
200
150
150
200
200
150
150
150
150
150
μ
μ
μ
μ
Thickness*3 [mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic BJ : X5R】 0.18mm thickness（E）
Part number 1
Part number 2
LMK105 BJ104[]E-R
JMK105 BJ224[]E-R
JMK105 BJ474[]E-R
AMK105 BJ105ME-R
Rated voltage
[V]
Temperature
characteristics
10
X5R
X5R
X5R
X5R
6.3
4
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.18±0.02
0.18±0.02
0.18±0.02
0.18±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
CERAMIC CAPACITORS
【Temperature Characteristic BJ : X5R】 0.13mm thickness（H）
Part number 1
Part number 2
LMK105 BJ104MH-R
JMK105 BJ224MH-R
AMK105 BJ474MH-R
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
0.1 μ
0.22 μ
0.47 μ
Temperature
characteristics
Capacitance
[F]
10
6.3
4
HTLT
Thickness*3 [mm]
0.13±0.02
0.13±0.02
0.13±0.02
Soldering
R:Reflow
W:Wave
R
R
R
【Temperature Characteristic C6 : X6S】 0.5mm thickness（V）
Part number 1
Part number 2
GMK105CC6105MV-F
TMK105AC6105[]V-F
EMK105 C6105[]V-F
EMK105CC6225MV-F
LMK105 C6105[]V-F
LMK105AC6225MV-F
JMK105 C6105[]V-F
JMK105 C6225MV-F
JMK105BC6475MV-F
AMK105BC6475MV-F
Rated voltage
[V]
35
25
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
16
10
6.3
4
1
1
1
2.2
1
2.2
1
2.2
4.7
4.7
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.5+0.20/-0
0.5±0.10
0.5±0.05
0.5+0.20/-0
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5+0.15/-0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.5mm thickness（V）
Part number 1
UMK105 B7221[]V-F
UMK105 B7331[]V-F
UMK105 B7471[]V-F
UMK105 B7681[]V-F
UMK105 B7102[]V-F
UMK105 B7152[]V-F
UMK105 B7222[]V-F
UMK105 B7332[]V-F
UMK105 B7472[]V-F
UMK105 B7682[]V-F
UMK105 B7103[]V-F
UMK105 B7223[]V-FR
UMK105 B7473[]V-FR
UMK105 B7104[]V-FR
TMK105 B7152[]V-F
TMK105 B7222[]V-F
TMK105 B7332[]V-F
TMK105 B7472[]V-F
TMK105 B7682[]V-F
TMK105 B7103[]V-F
TMK105 B7223[]V-F
TMK105 B7473[]V-F
TMK105 B7104[]V-FR
TMK105 B7224[]V-FR
EMK105 B7223[]V-F
EMK105 B7473[]V-F
EMK105 B7104[]V-F
EMK105 B7224[]V-FR
LMK105 B7223[]V-F
LMK105 B7473[]V-F
LMK105 B7104[]V-F
LMK105 B7224[]V-FR
LMK105 B7474[]V-F
JMK105 B7224[]V-F
JMK105 B7474[]V-F
Part number 2
Rated voltage
[V]
50
25
16
10
6.3
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
p
p
p
p
p
p
p
p
p
p
μ
μ
μ
μ
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness
*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
10
17
■PARTS NUMBER
●107TYPE
【Temperature Characteristic BJ : B/X5R】 0.8mm thickness（A）
Part number 1
Rated voltage
[V]
Temperature
characteristics
UMK107 BJ474[]A-TD
50
35
TMK107 BJ225[]A-TD
25
16
B
B
B
B
B
B
B
B
EMK107 BJ475[]A-TD
10
B
B
B
B
LMK107 BJ106[]ALTD
B
JMK107 BJ106[]A-T
AMK107 BJ226MA-T
6.3
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.47
1
2.2
1
0.22
0.47
1
2.2
4.7
10
0.22
0.47
1
2.2
4.7
10
0.22
0.47
1
2.2
4.7
10
22
2.2
4.7
10
22
10
22
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±20
±20
10
10
10
5
3.5
3.5
5
10
10
10
3.5
3.5
5
10
10
10
3.5
3.5
5
10
10
10
10
10
10
10
10
10
10
150
150
150
150
200
150
150
150
150
150
200
200
150
150
150
150
200
200
200
150
150
150
150
150
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
±20
10
10
10
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
±20
±20
10
5
10
10
10
5
10
10
5
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.22
0.47
1
0.47
1
0.22
0.47
1
2.2
0.22
0.47
1
2.2
0.22
0.47
1
2.2
4.7
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
10
10
10
10
3.5
3.5
5
10
3.5
3.5
5
10
3.5
3.5
5
10
10
150
150
150
150
150
150
150
150
150
200
200
150
150
200
200
150
200
150
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
0.8+0.15/-0.05
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
0.8+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R/W
R
R
R
R
R
R/W
R
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
UMK107ABJ474[]A-T
UMK107 BJ105[]A-T
UMK107BBJ225[]A-T
GMK107 BJ105[]A-T
TMK107 BJ224[]A-T
TMK107 BJ474[]A-T
TMK107 BJ105[]A-T
TMK107ABJ225[]A-T
TMK107BBJ475[]A-T
TMK107BBJ106MA-T
EMK107 BJ224[]A-T
EMK107 BJ474[]A-T
EMK107 BJ105[]A-T
EMK107 BJ225[]A-T
EMK107ABJ475[]A-T
EMK107BBJ106MA-T
LMK107 BJ224[]A-T
LMK107 BJ474[]A-T
LMK107 BJ105[]A-T
LMK107 BJ225[]A-T
LMK107 BJ475[]A-T
LMK107BBJ106[]ALT
LMK107BBJ226MA-T
JMK107 BJ225[]A-T
JMK107 BJ475[]A-T
JMK107ABJ106[]A-T
JMK107BBJ226MA-T
AMK107 BJ106MA-T
AMK107BBJ226MA-T
Part number 2
【Temperature Characteristic BJ : B/X5R】 0.45mm thickness（K）
Part number 1
TMK107 BJ105[]K-T
EMK107 BJ105[]K-T
EMK107BBJ225[]K-T
LMK107 BJ105[]K-T
LMK107 BJ225[]K-T
LMK107BBJ475MKLT
JMK107 BJ105[]K-T
JMK107 BJ225[]K-T
JMK107 BJ475MK-T
JMK107BBJ106MK-T*2
AMK107BBJ106MK-T*2
Part number 2
Rated voltage
[V]
Temperature
characteristics
25
16
B
10
LMK107 BJ475MKLTD
B
6.3
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
1
1
2.2
1
2.2
4.7
1
2.2
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S】 0.8mm thickness（A）
Part number 1
Part number 2
TMK107BC6225[]A-T
EMK107 C6105[]A-T
EMK107BC6225[]A-T
EMK107BC6475[]A-T
EMK107BC6106MA-T
LMK107 C6105[]A-T
LMK107AC6475[]A-T
LMK107BC6106MA-T
JMK107 C6105[]A-T
JMK107 C6475[]A-T
JMK107BC6106MA-T
JMK107BC6226MA-T
AMK107AC6106MA-T
AMK107BC6226MA-T
Rated voltage
[V]
Temperature
characteristics
25
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
16
10
6.3
4
Capacitance
[F]
2.2
1
2.2
4.7
10
1
4.7
10
1
4.7
10
22
10
22
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.8+0.20/-0
0.8±0.10
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8+0.20/-0
0.8+0.15/-0.05
0.8+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.8mm thickness（A）
Part number 1
UMK107 B7224[]A-TR
UMK107 B7474[]A-TR
UMK107AB7105[]A-T
TMK107 B7474[]A-TR
TMK107 B7105[]A-T
EMK107 B7224[]A-T
EMK107 B7474[]A-T
EMK107 B7105[]A-T
EMK107BB7225[]A-T
LMK107 B7224[]A-T
LMK107 B7474[]A-T
LMK107 B7105[]A-T
LMK107 B7225[]A-TR
JMK107 B7224[]A-T
JMK107 B7474[]A-T
JMK107 B7105[]A-T
JMK107 B7225[]A-TR
JMK107BB7475[]A-T
Part number 2
Rated voltage
[V]
50
25
16
10
6.3
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R/W
R
R
R
R/W
R
R
R
R/W
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
11
■PARTS NUMBER
●212TYPE
【Temperature Characteristic BJ : B/X5R】 1.25mm thickness（G）
Part number 1
CERAMIC CAPACITORS
UMK212 BJ104[]G-T
UMK212 BJ224[]G-T
UMK212 BJ474[]G-T
UMK212 BJ105[]G-T
UMK212ABJ225[]G-T
UMK212BBJ475[]G-T
GMK212BBJ106[]G-T
TMK212 BJ225[]G-T
TMK212ABJ475[]G-T
TMK212BBJ106MG-T
TMK212BBJ226MG-TT
EMK212 BJ225[]G-T
EMK212ABJ475[]G-T
EMK212ABJ106[]G-T
EMK212BBJ226MG-T
LMK212 BJ225[]G-T
LMK212ABJ475[]G-T
LMK212ABJ106[]G-T
LMK212BBJ226MG-T
JMK212ABJ475[]G-T
JMK212ABJ106[]G-T
JMK212ABJ226MG-T
JMK212BBJ476MG-T
PMK212BBJ107MG-T
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
B
B
B
B
B
35
B
TMK212 BJ475[]G-T
EMK212 BJ475[]G-T
EMK212 BJ106[]G-T
LMK212
LMK212
LMK212
JMK212
JMK212
JMK212
JMK212
BJ475[]G-T
BJ106[]G-T
BJ226MG-T
BJ475[]G-T
BJ106[]G-T
BJ226MG-T
BJ476MG-T
25
16
10
B
B
B
B
B
6.3
2.5
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R
X5R*1
X5R*1
X5R
X5R
X5R
X5R*1
X5R
X5R
X5R
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
2.2
4.7
10
2.2
4.7
10
22
2.2
4.7
10
22
2.2
4.7
10
22
4.7
10
22
47
100
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
±20
3.5
3.5
3.5
5
10
10
10
5
10
10
10
5
5
10
10
5
5
10
10
5
10
10
10
10
200
200
150
150
150
150
150
150
150
150
150
200
150
150
150
200
200
200
150
200
200
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1
2.2
4.7
0.47
1
2.2
4.7
10
1
2.2
4.7
10
1
2.2
10
22
10
22
47
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±20
±20
10
10
10
3.5
5
5
10
10
5
5
10
10
3.5
5
10
10
10
10
10
150
150
150
200
200
150
150
150
200
150
150
150
200
200
150
150
200
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
10
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
±20
±20
±20
10
10
10
10
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±20
10
10
150
150
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.20/-0
1.25±0.10
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.20/-0
1.25±0.10
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
1.25±0.10
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.20/-0
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
UMK212ABJ105[]D-T
UMK212BBJ225[]D-T
GMK212BBJ475[]D-T
TMK212 BJ474[]D-T
TMK212 BJ105[]D-T
TMK212ABJ225[]D-T
TMK212BBJ475[]D-T
TMK212BBJ106[]D-T
EMK212 BJ105[]D-T
EMK212ABJ225[]D-T
EMK212 BJ475[]D-T
EMK212ABJ106[]D-T
LMK212 BJ105[]D-T
LMK212 BJ225[]D-T
LMK212ABJ106[]D-T
LMK212BBJ226MD-T
JMK212ABJ106[]D-T
JMK212ABJ226MD-T
AMK212BBJ476MD-T
Part number 2
UMK212 BJ105[]D-TD
Rated voltage
[V]
Temperature
characteristics
50
35
TMK212 BJ225[]D-T
TMK212 BJ475[]D-TD
EMK212 BJ225[]D-T
25
16
B
B
B
B
B
B
EMK212 BJ106[]D-TD
LMK212 BJ106[]D-T
JMK212 BJ106[]D-T
JMK212 BJ226MD-T
10
6.3
4
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R
X5R*1
X5R*1
X5R
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : X5R】 0.45mm thickness（K）
Part number 1
TMK212BBJ225[]K-T
EMK212BBJ475[]K-T
LMK212ABJ475[]K-T
JMK212ABJ475[]K-T
JMK212ABJ106MK-T *2
Part number 2
LMK212 BJ475[]K-T
JMK212 BJ475[]K-T
JMK212 BJ106MK-T
Rated voltage
[V]
Temperature
characteristics
25
16
10
X5R
X5R
X5R
X5R
X5R
6.3
Capacitance
[F]
2.2
4.7
4.7
4.7
10
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
【Temperature Characteristic C6 : X6S】 1.25mm thickness（G）
Part number 1
Part number 2
LMK212BC6226MG-T
JMK212BC6226MG-T
AMK212AC6226MG-T
AMK212BC6476MG-T
Rated voltage
[V]
Temperature
characteristics
10
6.3
X6S
X6S
X6S
X6S
4
Capacitance
[F]
22
22
22
47
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.25+0.20/-0
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic C6 : X6S】 0.85mm thickness（D）
Part number 1
Part number 2
LMK212AC6106[]D-T
AMK212BC6226MD-T
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
X6S
X6S
10 μ
22 μ
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
2.2
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
10
10
3.5
200
150
150
150
150
150
10
4
Thickness*3 [mm]
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
【Temperature Characteristic B7 : X7R】 1.25mm thickness（G）
Part number 1
UMK212 B7104[]G-T
UMK212 B7224[]G-T
UMK212 B7474[]G-T
UMK212 B7105[]G-T
UMK212BB7225[]G-T
GMK212 B7105[]G-T
Part number 2
Rated voltage
[V]
50
35
X7R
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25±0.10
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
R/W
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
12
17
■PARTS NUMBER
Part number 1
TMK212 B7105[]G-T
TMK212 B7225[]G-TR
TMK212AB7475[]G-T
EMK212 B7105[]G-T
EMK212 B7225[]G-T
EMK212 B7475[]G-T
EMK212BB7106MG-T
LMK212 B7105[]G-T
LMK212 B7225[]G-T
LMK212 B7475[]G-T
LMK212AB7106[]G-T
JMK212AB7106[]G-T
Part number 2
Rated voltage
[V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
25
TMK212 B7475[]G-T
16
10
LMK212 B7106[]G-TD
JMK212 B7106[]G-T
6.3
HTLT
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
10
10
3.5
10
10
10
3.5
5
10
10
10
150
150
150
200
150
150
150
200
200
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
2.2
0.47
1
2.2
4.7
1
2.2
4.7
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
10
10
10
10
3.5
5
5
10
3.5
5
10
150
150
150
150
150
200
200
150
150
200
200
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
±20
±20
±20
3.5
10
10
10
3.5
5
5
10
3.5
5
5
10
5
10
10
5
10
10
10
10
10
10
200
150
150
150
200
150
150
150
200
200
150
150
200
150
150
200
200
200
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±10，±20
±20
±20
3.5
3.5
10
3.5
3.5
5
10
3.5
5
10
10
5
10
10
10
10
10
150
150
150
200
150
150
150
200
200
150
150
200
200
150
200
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
±20
±20
±20
10
10
10
10
150
150
200
150
Capacitance
[F]
1
2.2
4.7
1
2.2
4.7
10
1
2.2
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
1.25+0.15/-0.05
Soldering
R:Reflow
W:Wave
R
R
R
R/W
R
R
R
R/W
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.85mm thickness（D）
UMK212AB7104[]D-T
UMK212AB7224[]D-T
UMK212AB7474[]D-T
UMK212AB7105[]D-T
TMK212AB7225[]D-TR
EMK212 B7474[]D-T
EMK212 B7105[]D-T
EMK212AB7225[]D-T
EMK212BB7475[]D-T
LMK212 B7105[]D-T
LMK212AB7225[]D-T
LMK212AB7475[]D-TR
Part number 2
Rated voltage
[V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
25
EMK212 B7225[]D-T
LMK212 B7225[]D-T
LMK212 B7475[]D-TR
16
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R/W
R
R
R
R
R
R
CERAMIC CAPACITORS
Part number 1
●316TYPE
【Temperature Characteristic BJ : B/X5R】 1.6mm thickness（L）
Part number 1
UMK316 BJ105[]L-T
UMK316 BJ225[]L-T
UMK316 BJ475[]L-T
UMK316BBJ106[]L-T
TMK316 BJ225[]L-T
TMK316 BJ475[]L-T
TMK316 BJ106[]L-T
TMK316BBJ226ML-T
EMK316 BJ225[]L-T
EMK316 BJ475[]L-T
EMK316 BJ106[]L-T
EMK316ABJ226[]L-T
LMK316 BJ106[]L-T
LMK316ABJ226[]L-T
LMK316ABJ476ML-T
JMK316 BJ106[]L-T
JMK316ABJ226[]L-T
JMK316ABJ476ML-T
JMK316ABJ107ML-T
AMK316ABJ107ML-T
AMK316BBJ157ML-T
PMK316BBJ227ML-T
Part number 2
Rated voltage
[V]
Temperature
characteristics
B
50
25
16
EMK316 BJ226[]L-T
LMK316 BJ226[]L-T
LMK316 BJ476ML-T
JMK316 BJ226[]L-T
JMK316 BJ476ML-T
JMK316 BJ107ML-T
AMK316 BJ107ML-T
10
6.3
B
B
B
B
B
B
B
B
B
B
4
2.5
X5R*1
X5R
X5R
X5R
X5R*1
X5R
X5R*1
X5R
X5R*1
X5R
X5R*1
X5R
X5R*1
X5R
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
1
2.2
4.7
10
2.2
4.7
10
22
2.2
4.7
10
22
10
22
47
10
22
47
100
100
150
220
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.30
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
UMK316 BJ105[]D-T
UMK316 BJ225[]D-T
UMK316ABJ475[]D-T
TMK316 BJ105[]D-T
TMK316 BJ225[]D-T
TMK316 BJ475[]D-T
TMK316ABJ106[]D-T
EMK316 BJ225[]D-T
EMK316 BJ475[]D-T
EMK316 BJ106[]D-T
EMK316ABJ226MD-T
LMK316 BJ475[]D-T
LMK316 BJ106[]D-T
LMK316ABJ226MD-T
JMK316 BJ106[]D-T
JMK316ABJ226MD-T
JMK316ABJ476MD-T
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
B
B
UMK316 BJ475[]D-T
25
B
B
TMK316 BJ106[]D-TD
16
B
B
EMK316 BJ226MD-T
10
B
B
LMK316 BJ226MD-T
B
JMK316 BJ226MD-T
JMK316 BJ476MD-T
6.3
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
1
2.2
4.7
1
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
10
22
47
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S】 1.6mm thickness（L）
Part number 1
EMK316BC6226ML-T
JMK316AC6476ML-T
AMK316AC6476ML-T
AMK316AC6107ML-T
Part number 2
Rated voltage
[V]
16
6.3
4
Temperature
characteristics
X6S
X6S
X6S
X6S
Capacitance
[F]
22
47
47
100
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
13
■PARTS NUMBER
【Temperature Characteristic C7 : X7S】 1.6mm thickness（L）
Part number 1
Part number 2
AMK316AC7476ML-T
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X7S
47 μ
Temperature
characteristics
4
HTLT
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
10
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.22
0.47
1
2.2
4.7
10
1
2.2
4.7
10
2.2
4.7
10
22
2.2
4.7
10
22
10
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
3.5
3.5
10
10
10
3.5
3.5
10
10
3.5
5
10
10
3.5
5
10
10
5
200
200
200
150
150
150
200
200
200
150
200
200
200
150
200
200
200
150
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±20
10
10
10
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±10，±20
±20
±20
±10，±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
10
3.5
5
10
5
10
10
5
10
10
10
10
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
200
150
150
150
150
150
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±20
±10，±20
±20
±20
±20
10
3.5
10
5
3.5
3.5
5
3.5
3.5
10
5
3.5
5
10
10
150
200
150
150
200
200
200
200
200
150
150
200
200
150
150
Thickness*3 [mm]
1.6±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R】 1.6mm thickness（L）
Part number 1
CERAMIC CAPACITORS
UMK316 B7224[]L-T
UMK316 B7474[]L-T
UMK316 B7105[]L-T
UMK316 B7225[]L-T
UMK316AB7475[]L-T
GMK316AB7106[]L-TR
TMK316 B7105[]L-T
TMK316 B7225[]L-T
TMK316AB7475[]L-T
TMK316AB7106[]L-T
EMK316 B7225[]L-T
EMK316 B7475[]L-T
EMK316AB7106[]L-T
EMK316BB7226ML-T
LMK316 B7225[]L-T
LMK316 B7475[]L-T
LMK316AB7106[]L-T
LMK316AB7226[]L-TR
JMK316 B7106[]L-T
Part number 2
Rated voltage
[V]
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
UMK316 B7475[]L-T
35
TMK316 B7475[]L-T
TMK316 B7106[]L-TD
EMK316 B7106[]L-TD
LMK316 B7106[]L-TD
LMK316 B7226[]Ｌ-TD
25
16
10
6.3
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R/W
R/W
R
R
R
R
R/W
R
R
R
R/W
R
R
R
R/W
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.85mm thickness（D）
Part number 1
Part number 2
UMK316 B7225[]D-T
TMK316AB7475[]D-T
LMK316AB7106MD-T
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X7R
X7R
X7R
2.2 μ
4.7 μ
10 μ
50
25
10
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
●325TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Part number 1
UMK325 BJ475[]M-P
UMK325 BJ106[]M-P
GMK325 BJ226MM-P
TMK325 BJ106[]M-P
TMK325 BJ226[]M-P
TMK325ABJ476MM-P
EMK325 BJ226[]M-P
EMK325 BJ476MM-P
EMK325ABJ107MM-P
LMK325 BJ226[]M-P
LMK325 BJ476MM-P
LMK325ABJ107MM-P
JMK325 BJ476MM-P
JMK325ABJ107MM-P
JMK325ABJ157MM-P
JMK325ABJ227MM-P
JMK325ABJ337MM-P
AMK325ABJ157MM-P
AMK325ABJ227MM-P
AMK325ABJ337MM-P
Part number 2
Rated voltage
[V]
Temperature
characteristics
50
35
B
25
B
16
B
10
LMK325 BJ107MM-P
JMK325 BJ107MM-P
6.3
4
X5R
X5R
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
4.7
10
22
10
22
47
22
47
100
22
47
100
47
100
150
220
330
150
220
330
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 1.9mm thickness（Y,N）
Part number 1
UMK325 BJ475[]N-T
GMK325 BJ225[]N-T
GMK325 BJ475[]N-T
GMK325 BJ106[]N-T
TMK325 BJ335MN-T
TMK325 BJ475[]N-T
TMK325 BJ106[]N-T
EMK325 BJ475[]N-T
EMK325 BJ106[]N-T
EMK325 BJ476MY-T
LMK325 BJ226MY-T
LMK325 BJ106[]N-T
JMK325 BJ226MY-T
JMK325 BJ107MY-T
JMK325 BJ476MN-T
Part number 2
Rated voltage
[V]
Temperature
characteristics
50
B
35
25
16
10
6.3
B
B
B
B
B
B
B
B
B
X5R
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
4.7
2.2
4.7
10
3.3
4.7
10
4.7
10
47
22
10
22
100
47
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
14
17
■PARTS NUMBER
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
Part number 2
TMK325 BJ106[]D-T
EMK325 BJ106[]D-T
EMK325 BJ226MD-T
LMK325 BJ335[]D-T
LMK325 BJ475[]D-T
LMK325 BJ106[]D-T
Rated voltage
[V]
25
16
10
Temperature
characteristics
B
B
B
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
10
10
22
3.3
4.7
10
μ
μ
μ
μ
μ
μ
HTLT
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
5
5
10
3.5
5
5
150
150
150
200
200
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
±20
±20
±20
±20
±20
±20
10
10
10
10
10
10
10
150
150
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
10
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
10
10
10
10
10
10
150
150
150
150
150
150
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
3.5
3.5
10
3.5
3.5
3.5
150
200
150
150
200
150
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
10
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±20
10
150
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S】 2.5mm thickness（M）
Part number 1
Part number 2
Temperature
characteristics
16
10
6.3
X6S
X6S
X6S
X6S
X6S
X6S
X6S
4
2.5
Capacitance
[F]
47
100
100
150
220
330
330
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
【Temperature Characteristic C7 : X7S】 2.5mm thickness（M）
Part number 1
Part number 2
JMK325AC7107MM-P
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X7S
100 μ
Temperature
characteristics
Capacitance
[F]
6.3
HTLT
Thickness*3 [mm]
2.5±0.30
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Part number 1
Part number 2
UMK325 B7475[]M-P
UMK325AB7106[]M-P
TMK325AB7106[]M-P
TMK325 B7226[]M-PR
EMK325 B7226[]M-PR
LMK325 B7476[]M-PR
JMK325 B7476[]M-PR
Rated voltage
[V]
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
25
16
10
6.3
4.7
10
10
22
22
47
47
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
CERAMIC CAPACITORS
EMK325AC6476MM-P
LMK325AC6107MM-P
JMK325AC6107MM-P
AMK325AC6157MM-P
AMK325AC6227MM-P
AMK325AC6337MM-P
PMK325AC6337MM-P
Rated voltage
[V]
【Temperature Characteristic B7 : X7R】 1.9mm thickness（N）
Part number 1
Part number 2
UMK325 B7475[]N-TR
TMK325 B7335[]N-T
TMK325 B7475[]N-T
TMK325 B7106[]N-TR
EMK325 B7475[]N-T
EMK325 B7106[]N-T
LMK325 B7106[]N-T
Rated voltage
[V]
Temperature
characteristics
50
X7R
X7R
X7R
X7R
X7R
X7R
X7R
25
16
10
Capacitance
[F]
4.7
3.3
4.7
10
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
●432TYPE
【Temperature Characteristic BJ : X5R】 2.5mm thickness（M）
Part number 1
Part number 2
AMK432 BJ477MM-T
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X5R
470 μ
Temperature
characteristics
Capacitance
[F]
X6S
470 μ
4
HTLT
Thickness*3 [mm]
2.5±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic C6 : X6S】 2.5mm thickness（M）
Part number 1
PMK432 C6477MM-T
Part number 2
Rated voltage
[V]
2.5
HTLT
Thickness*3 [mm]
2.5±0.20
Soldering
R:Reflow
W:Wave
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
15
■PARTS NUMBER
Multilayer Ceramic Capacitors（Temperature compensating type）
●021TYPE
【Temperature Characteristic CG : CG/C0G】 0.125mm thickness（K）
Part number 1
CERAMIC CAPACITORS
TMK021 CG0R2[]K-W
TMK021 CG0R3[]K-W
TMK021 CG0R4[]K-W
TMK021 CG0R5[]K-W
TMK021 CG0R6[]K-W
TMK021 CG0R7[]K-W
TMK021 CGR75[]K-W
TMK021 CG0R8[]K-W
TMK021 CG0R9[]K-W
TMK021 CG010[]K-W
TMK021 CG1R1[]K-W
TMK021 CG1R2[]K-W
TMK021 CG1R3[]K-W
TMK021 CG1R4[]K-W
TMK021 CG1R5[]K-W
TMK021 CG1R6[]K-W
TMK021 CG1R7[]K-W
TMK021 CG1R8[]K-W
TMK021 CG1R9[]K-W
TMK021 CG020[]K-W
TMK021 CG2R1[]K-W
TMK021 CG2R2[]K-W
TMK021 CG2R3[]K-W
TMK021 CG2R4[]K-W
TMK021 CG2R5[]K-W
TMK021 CG2R6[]K-W
TMK021 CG2R7[]K-W
TMK021 CG2R8[]K-W
TMK021 CG2R9[]K-W
TMK021 CG030[]K-W
TMK021 CG3R1[]K-W
TMK021 CG3R2[]K-W
TMK021 CG3R3[]K-W
TMK021 CG3R4[]K-W
TMK021 CG3R5[]K-W
TMK021 CG3R6[]K-W
TMK021 CG3R7[]K-W
TMK021 CG3R8[]K-W
TMK021 CG3R9[]K-W
TMK021 CG040[]K-W
TMK021 CG4R1[]K-W
TMK021 CG4R2[]K-W
TMK021 CG4R3[]K-W
TMK021 CG4R4[]K-W
TMK021 CG4R5[]K-W
TMK021 CG4R6[]K-W
TMK021 CG4R7[]K-W
TMK021 CG4R8[]K-W
TMK021 CG4R9[]K-W
TMK021 CG050[]K-W
TMK021 CG5R1[]K-W
TMK021 CG5R2[]K-W
TMK021 CG5R3[]K-W
TMK021 CG5R4[]K-W
TMK021 CG5R5[]K-W
TMK021 CG5R6[]K-W
TMK021 CG5R7[]K-W
TMK021 CG5R8[]K-W
TMK021 CG5R9[]K-W
TMK021 CG060[]K-W
TMK021 CG6R1[]K-W
TMK021 CG6R2[]K-W
TMK021 CG6R3[]K-W
TMK021 CG6R4[]K-W
TMK021 CG6R5[]K-W
TMK021 CG6R6[]K-W
TMK021 CG6R7[]K-W
TMK021 CG6R8[]K-W
TMK021 CG6R9[]K-W
TMK021 CG070[]K-W
TMK021 CG7R1[]K-W
TMK021 CG7R2[]K-W
TMK021 CG7R3[]K-W
TMK021 CG7R4[]K-W
TMK021 CG7R5[]K-W
TMK021 CG7R6[]K-W
TMK021 CG7R7[]K-W
TMK021 CG7R8[]K-W
TMK021 CG7R9[]K-W
TMK021 CG080[]K-W
TMK021 CG8R1[]K-W
TMK021 CG8R2[]K-W
TMK021 CG8R3[]K-W
TMK021 CG8R4[]K-W
TMK021 CG8R5[]K-W
Part number 2
Rated voltage
[V]
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
0.2 p
0.3 p
0.4 p
0.5 p
0.6 p
0.7 p
0.75 p
0.8 p
0.9 p
1p
1.1 p
1.2 p
1.3 p
1.4 p
1.5 p
1.6 p
1.7 p
1.8 p
1.9 p
2p
2.1 p
2.2 p
2.3 p
2.4 p
2.5 p
2.6 p
2.7 p
2.8 p
2.9 p
3p
3.1 p
3.2 p
3.3 p
3.4 p
3.5 p
3.6 p
3.7 p
3.8 p
3.9 p
4p
4.1 p
4.2 p
4.3 p
4.4 p
4.5 p
4.6 p
4.7 p
4.8 p
4.9 p
5p
5.1 p
5.2 p
5.3 p
5.4 p
5.5 p
5.6 p
5.7 p
5.8 p
5.9 p
6p
6.1 p
6.2 p
6.3 p
6.4 p
6.5 p
6.6 p
6.7 p
6.8 p
6.9 p
7p
7.1 p
7.2 p
7.3 p
7.4 p
7.5 p
7.6 p
7.7 p
7.8 p
7.9 p
8p
8.1 p
8.2 p
8.3 p
8.4 p
8.5 p
Capacitance tolerance
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
HTLT
Q
*3
(at 1MHz)
Thickness [mm]
Rated
voltage
x％
min
404
200
0.125±0.013
406
200
0.125±0.013
408
200
0.125±0.013
410
200
0.125±0.013
412
200
0.125±0.013
414
200
0.125±0.013
415
200
0.125±0.013
416
200
0.125±0.013
418
200
0.125±0.013
420
200
0.125±0.013
422
200
0.125±0.013
424
200
0.125±0.013
426
200
0.125±0.013
428
200
0.125±0.013
430
200
0.125±0.013
432
200
0.125±0.013
434
200
0.125±0.013
436
200
0.125±0.013
438
200
0.125±0.013
440
200
0.125±0.013
442
200
0.125±0.013
444
200
0.125±0.013
446
200
0.125±0.013
448
200
0.125±0.013
450
200
0.125±0.013
452
200
0.125±0.013
454
200
0.125±0.013
456
200
0.125±0.013
458
200
0.125±0.013
460
200
0.125±0.013
462
200
0.125±0.013
464
200
0.125±0.013
466
200
0.125±0.013
468
200
0.125±0.013
470
200
0.125±0.013
472
200
0.125±0.013
474
200
0.125±0.013
476
200
0.125±0.013
478
200
0.125±0.013
480
200
0.125±0.013
482
200
0.125±0.013
484
200
0.125±0.013
486
200
0.125±0.013
488
200
0.125±0.013
490
200
0.125±0.013
492
200
0.125±0.013
494
200
0.125±0.013
496
200
0.125±0.013
498
200
0.125±0.013
500
200
0.125±0.013
502
200
0.125±0.013
504
200
0.125±0.013
506
200
0.125±0.013
508
200
0.125±0.013
510
200
0.125±0.013
512
200
0.125±0.013
514
200
0.125±0.013
516
200
0.125±0.013
518
200
0.125±0.013
520
200
0.125±0.013
522
200
0.125±0.013
524
200
0.125±0.013
526
200
0.125±0.013
528
200
0.125±0.013
530
200
0.125±0.013
532
200
0.125±0.013
534
200
0.125±0.013
536
200
0.125±0.013
538
200
0.125±0.013
540
200
0.125±0.013
542
200
0.125±0.013
544
200
0.125±0.013
546
200
0.125±0.013
548
200
0.125±0.013
550
200
0.125±0.013
552
200
0.125±0.013
554
200
0.125±0.013
556
200
0.125±0.013
558
200
0.125±0.013
560
200
0.125±0.013
562
200
0.125±0.013
564
200
0.125±0.013
566
200
0.125±0.013
568
200
0.125±0.013
570
200
0.125±0.013
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
16
17
■PARTS NUMBER
Part number 1
Part number 2
25
16
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
Capacitance
[F]
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
12
15
18
22
27
33
39
47
56
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
572
200
0.125±0.013
574
200
0.125±0.013
576
200
0.125±0.013
578
200
0.125±0.013
580
200
0.125±0.013
582
200
0.125±0.013
584
200
0.125±0.013
586
200
0.125±0.013
588
200
0.125±0.013
590
200
0.125±0.013
592
200
0.125±0.013
594
200
0.125±0.013
596
200
0.125±0.013
598
200
0.125±0.013
600
200
0.125±0.013
640
200
0.125±0.013
700
200
0.125±0.013
760
200
0.125±0.013
840
200
0.125±0.013
940
200
0.125±0.013
1000
150
0.125±0.013
1000
150
0.125±0.013
1000
150
0.125±0.013
1000
150
0.125±0.013
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
408
200
0.2±0.02
410
200
0.2±0.02
412
200
0.2±0.02
414
200
0.2±0.02
415
200
0.2±0.02
416
200
0.2±0.02
418
200
0.2±0.02
420
200
0.2±0.02
422
200
0.2±0.02
424
200
0.2±0.02
426
200
0.2±0.02
428
200
0.2±0.02
430
200
0.2±0.02
432
200
0.2±0.02
434
200
0.2±0.02
436
200
0.2±0.02
438
200
0.2±0.02
440
200
0.2±0.02
442
200
0.2±0.02
444
200
0.2±0.02
446
200
0.2±0.02
448
200
0.2±0.02
450
200
0.2±0.02
452
200
0.2±0.02
454
200
0.2±0.02
456
200
0.2±0.02
458
200
0.2±0.02
460
200
0.2±0.02
462
200
0.2±0.02
464
200
0.2±0.02
466
200
0.2±0.02
468
200
0.2±0.02
470
200
0.2±0.02
472
200
0.2±0.02
474
200
0.2±0.02
476
200
0.2±0.02
478
200
0.2±0.02
480
200
0.2±0.02
482
200
0.2±0.02
484
200
0.2±0.02
486
200
0.2±0.02
488
200
0.2±0.02
490
200
0.2±0.02
492
200
0.2±0.02
494
200
0.2±0.02
496
200
0.2±0.02
498
200
0.2±0.02
500
200
0.2±0.02
502
200
0.2±0.02
504
200
0.2±0.02
506
200
0.2±0.02
508
200
0.2±0.02
510
200
0.2±0.02
512
200
0.2±0.02
514
200
0.2±0.02
516
200
0.2±0.02
518
200
0.2±0.02
520
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●042TYPE
【Temperature Characteristic CG : CG/C0G】 0.2mm thickness（C,D）
Part number 1
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
CG0R4[]D-W
CG0R5[]D-W
CG0R6[]D-W
CG0R7[]D-W
CGR75[]D-W
CG0R8[]D-W
CG0R9[]D-W
CG010[]D-W
CG1R1[]D-W
CG1R2[]D-W
CG1R3[]D-W
CG1R4[]D-W
CG1R5[]D-W
CG1R6[]D-W
CG1R7[]D-W
CG1R8[]D-W
CG1R9[]D-W
CG020[]D-W
CG2R1[]D-W
CG2R2[]D-W
CG2R3[]D-W
CG2R4[]D-W
CG2R5[]D-W
CG2R6[]D-W
CG2R7[]D-W
CG2R8[]D-W
CG2R9[]D-W
CG030[]D-W
CG3R1[]D-W
CG3R2[]D-W
CG3R3[]D-W
CG3R4[]D-W
CG3R5[]D-W
CG3R6[]D-W
CG3R7[]D-W
CG3R8[]D-W
CG3R9[]D-W
CG040[]D-W
CG4R1[]D-W
CG4R2[]D-W
CG4R3[]D-W
CG4R4[]D-W
CG4R5[]D-W
CG4R6[]D-W
CG4R7[]D-W
CG4R8[]D-W
CG4R9[]D-W
CG050[]D-W
CG5R1[]D-W
CG5R2[]D-W
CG5R3[]D-W
CG5R4[]D-W
CG5R5[]D-W
CG5R6[]D-W
CG5R7[]D-W
CG5R8[]D-W
CG5R9[]D-W
CG060[]D-W
Part number 2
Rated voltage
[V]
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance tolerance
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
CERAMIC CAPACITORS
TMK021 CG8R6[]K-W
TMK021 CG8R7[]K-W
TMK021 CG8R8[]K-W
TMK021 CG8R9[]K-W
TMK021 CG090[]K-W
TMK021 CG9R1[]K-W
TMK021 CG9R2[]K-W
TMK021 CG9R3[]K-W
TMK021 CG9R4[]K-W
TMK021 CG9R5[]K-W
TMK021 CG9R6[]K-W
TMK021 CG9R7[]K-W
TMK021 CG9R8[]K-W
TMK021 CG9R9[]K-W
TMK021 CG100DK-W
TMK021 CG120JK-W
TMK021 CG150JK-W
TMK021 CG180JK-W
TMK021 CG220JK-W
TMK021 CG270JK-W
EMK021 CG330JK-W
EMK021 CG390JK-W
EMK021 CG470JK-W
EMK021 CG560JK-W
Rated voltage
[V]
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
17
■PARTS NUMBER
Part number 1
CERAMIC CAPACITORS
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
TMK042
Part number 2
CG6R1[]D-W
CG6R2[]D-W
CG6R3[]D-W
CG6R4[]D-W
CG6R5[]D-W
CG6R6[]D-W
CG6R7[]D-W
CG6R8[]D-W
CG6R9[]D-W
CG070[]D-W
CG7R1[]D-W
CG7R2[]D-W
CG7R3[]D-W
CG7R4[]D-W
CG7R5[]D-W
CG7R6[]D-W
CG7R7[]D-W
CG7R8[]D-W
CG7R9[]D-W
CG080[]D-W
CG8R1[]D-W
CG8R2[]D-W
CG8R3[]D-W
CG8R4[]D-W
CG8R5[]D-W
CG8R6[]D-W
CG8R7[]D-W
CG8R8[]D-W
CG8R9[]D-W
CG090[]D-W
CG9R1[]D-W
CG9R2[]D-W
CG9R3[]D-W
CG9R4[]D-W
CG9R5[]D-W
CG9R6[]D-W
CG9R7[]D-W
CG9R8[]D-W
CG9R9[]D-W
CG100DD-W
CG110JD-W
CG120JD-W
CG130JD-W
CG150JD-W
CG160JC-W
CG180JC-W
CG200JC-W
CG220JC-W
CG240JC-W
CG270JC-W
CG300JC-W
CG330JC-W
CG360JC-W
CG390JC-W
CG430JC-W
CG470JC-W
CG510JC-W
CG560JC-W
CG620JC-W
CG680JC-W
CG750JC-W
CG820JC-W
CG910JC-W
CG101JC-W
Rated voltage
[V]
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
Capacitance
[F]
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.25pF,
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
522
200
0.2±0.02
524
200
0.2±0.02
526
200
0.2±0.02
528
200
0.2±0.02
530
200
0.2±0.02
532
200
0.2±0.02
534
200
0.2±0.02
536
200
0.2±0.02
538
200
0.2±0.02
540
200
0.2±0.02
542
200
0.2±0.02
544
200
0.2±0.02
546
200
0.2±0.02
548
200
0.2±0.02
550
200
0.2±0.02
552
200
0.2±0.02
554
200
0.2±0.02
556
200
0.2±0.02
558
200
0.2±0.02
560
200
0.2±0.02
562
200
0.2±0.02
564
200
0.2±0.02
566
200
0.2±0.02
568
200
0.2±0.02
570
200
0.2±0.02
572
200
0.2±0.02
574
200
0.2±0.02
576
200
0.2±0.02
578
200
0.2±0.02
580
200
0.2±0.02
582
200
0.2±0.02
584
200
0.2±0.02
586
200
0.2±0.02
588
200
0.2±0.02
590
200
0.2±0.02
592
200
0.2±0.02
594
200
0.2±0.02
596
200
0.2±0.02
598
200
0.2±0.02
600
200
0.2±0.02
620
200
0.2±0.02
640
200
0.2±0.02
660
200
0.2±0.02
700
200
0.2±0.02
720
200
0.2±0.02
760
200
0.2±0.02
800
200
0.2±0.02
840
200
0.2±0.02
880
200
0.2±0.02
940
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
408
200
0.2±0.02
410
200
0.2±0.02
412
200
0.2±0.02
414
200
0.2±0.02
415
200
0.2±0.02
416
200
0.2±0.02
418
200
0.2±0.02
420
200
0.2±0.02
422
200
0.2±0.02
424
200
0.2±0.02
426
200
0.2±0.02
428
200
0.2±0.02
430
200
0.2±0.02
432
200
0.2±0.02
434
200
0.2±0.02
436
200
0.2±0.02
438
200
0.2±0.02
440
200
0.2±0.02
442
200
0.2±0.02
444
200
0.2±0.02
446
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic CG : CG/C0G】 0.2mm thickness（C,D）
Part number 1
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
CG0R4[]D-W
CG0R5[]D-W
CG0R6[]D-W
CG0R7[]D-W
CGR75[]D-W
CG0R8[]D-W
CG0R9[]D-W
CG010[]D-W
CG1R1[]D-W
CG1R2[]D-W
CG1R3[]D-W
CG1R4[]D-W
CG1R5[]D-W
CG1R6[]D-W
CG1R7[]D-W
CG1R8[]D-W
CG1R9[]D-W
CG020[]D-W
CG2R1[]D-W
CG2R2[]D-W
CG2R3[]D-W
Part number 2
Rated voltage
[V]
16
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.05pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
18
17
■PARTS NUMBER
Part number 1
Rated voltage
[V]
16
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Thickness *3 [mm]
Rated voltage x ％
min
448
200
0.2±0.02
450
200
0.2±0.02
452
200
0.2±0.02
454
200
0.2±0.02
456
200
0.2±0.02
458
200
0.2±0.02
460
200
0.2±0.02
462
200
0.2±0.02
464
200
0.2±0.02
466
200
0.2±0.02
468
200
0.2±0.02
470
200
0.2±0.02
472
200
0.2±0.02
474
200
0.2±0.02
476
200
0.2±0.02
478
200
0.2±0.02
480
200
0.2±0.02
482
200
0.2±0.02
484
200
0.2±0.02
486
200
0.2±0.02
488
200
0.2±0.02
490
200
0.2±0.02
492
200
0.2±0.02
494
200
0.2±0.02
496
200
0.2±0.02
498
200
0.2±0.02
500
200
0.2±0.02
502
200
0.2±0.02
504
200
0.2±0.02
506
200
0.2±0.02
508
200
0.2±0.02
510
200
0.2±0.02
512
200
0.2±0.02
514
200
0.2±0.02
516
200
0.2±0.02
518
200
0.2±0.02
520
200
0.2±0.02
522
200
0.2±0.02
524
200
0.2±0.02
526
200
0.2±0.02
528
200
0.2±0.02
530
200
0.2±0.02
532
200
0.2±0.02
534
200
0.2±0.02
536
200
0.2±0.02
538
200
0.2±0.02
540
200
0.2±0.02
542
200
0.2±0.02
544
200
0.2±0.02
546
200
0.2±0.02
548
200
0.2±0.02
550
200
0.2±0.02
552
200
0.2±0.02
554
200
0.2±0.02
556
200
0.2±0.02
558
200
0.2±0.02
560
200
0.2±0.02
562
200
0.2±0.02
564
200
0.2±0.02
566
200
0.2±0.02
568
200
0.2±0.02
570
200
0.2±0.02
572
200
0.2±0.02
574
200
0.2±0.02
576
200
0.2±0.02
578
200
0.2±0.02
580
200
0.2±0.02
582
200
0.2±0.02
584
200
0.2±0.02
586
200
0.2±0.02
588
200
0.2±0.02
590
200
0.2±0.02
592
200
0.2±0.02
594
200
0.2±0.02
596
200
0.2±0.02
598
200
0.2±0.02
600
200
0.2±0.02
620
200
0.2±0.02
640
200
0.2±0.02
660
200
0.2±0.02
700
200
0.2±0.02
720
200
0.2±0.02
760
200
0.2±0.02
800
200
0.2±0.02
840
200
0.2±0.02
880
200
0.2±0.02
940
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
EMK042 CG2R4[]D-W
EMK042 CG2R5[]D-W
EMK042 CG2R6[]D-W
EMK042 CG2R7[]D-W
EMK042 CG2R8[]D-W
EMK042 CG2R9[]D-W
EMK042 CG030[]D-W
EMK042 CG3R1[]D-W
EMK042 CG3R2[]D-W
EMK042 CG3R3[]D-W
EMK042 CG3R4[]D-W
EMK042 CG3R5[]D-W
EMK042 CG3R6[]D-W
EMK042 CG3R7[]D-W
EMK042 CG3R8[]D-W
EMK042 CG3R9[]D-W
EMK042 CG040[]D-W
EMK042 CG4R1[]D-W
EMK042 CG4R2[]D-W
EMK042 CG4R3[]D-W
EMK042 CG4R4[]D-W
EMK042 CG4R5[]D-W
EMK042 CG4R6[]D-W
EMK042 CG4R7[]D-W
EMK042 CG4R8[]D-W
EMK042 CG4R9[]D-W
EMK042 CG050[]D-W
EMK042 CG5R1[]D-W
EMK042 CG5R2[]D-W
EMK042 CG5R3[]D-W
EMK042 CG5R4[]D-W
EMK042 CG5R5[]D-W
EMK042 CG5R6[]D-W
EMK042 CG5R7[]D-W
EMK042 CG5R8[]D-W
EMK042 CG5R9[]D-W
EMK042 CG060[]D-W
EMK042 CG6R1[]D-W
EMK042 CG6R2[]D-W
EMK042 CG6R3[]D-W
EMK042 CG6R4[]D-W
EMK042 CG6R5[]D-W
EMK042 CG6R6[]D-W
EMK042 CG6R7[]D-W
EMK042 CG6R8[]D-W
EMK042 CG6R9[]D-W
EMK042 CG070[]D-W
EMK042 CG7R1[]D-W
EMK042 CG7R2[]D-W
EMK042 CG7R3[]D-W
EMK042 CG7R4[]D-W
EMK042 CG7R5[]D-W
EMK042 CG7R6[]D-W
EMK042 CG7R7[]D-W
EMK042 CG7R8[]D-W
EMK042 CG7R9[]D-W
EMK042 CG080[]D-W
EMK042 CG8R1[]D-W
EMK042 CG8R2[]D-W
EMK042 CG8R3[]D-W
EMK042 CG8R4[]D-W
EMK042 CG8R5[]D-W
EMK042 CG8R6[]D-W
EMK042 CG8R7[]D-W
EMK042 CG8R8[]D-W
EMK042 CG8R9[]D-W
EMK042 CG090[]D-W
EMK042 CG9R1[]D-W
EMK042 CG9R2[]D-W
EMK042 CG9R3[]D-W
EMK042 CG9R4[]D-W
EMK042 CG9R5[]D-W
EMK042 CG9R6[]D-W
EMK042 CG9R7[]D-W
EMK042 CG9R8[]D-W
EMK042 CG9R9[]D-W
EMK042 CG100DD-W
EMK042 CG110JD-W
EMK042 CG120JD-W
EMK042 CG130JD-W
EMK042 CG150JD-W
EMK042 CG160JC-W
EMK042 CG180JC-W
EMK042 CG200JC-W
EMK042 CG220JC-W
EMK042 CG240JC-W
EMK042 CG270JC-W
EMK042 CG300JC-W
EMK042 CG330JC-W
EMK042 CG360JC-W
Part number 2
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
19
■PARTS NUMBER
Part number 1
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
LMK042
Part number 2
CG390JC-W
CG430JC-W
CG470JC-W
CG510JC-W
CG560JC-W
CG620JC-W
CG680JC-W
CG750JC-W
CG820JC-W
CG910JC-W
CG101JC-W
CG221JC-W
Rated voltage
[V]
16
10
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
39
43
47
51
56
62
68
75
82
91
100
220
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
CERAMIC CAPACITORS
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
1000
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated
voltage
x％
min
404
200
0.3±0.03
406
200
0.3±0.03
408
200
0.3±0.03
410
200
0.3±0.03
412
200
0.3±0.03
414
200
0.3±0.03
415
200
0.3±0.03
416
200
0.3±0.03
418
200
0.3±0.03
420
200
0.3±0.03
422
200
0.3±0.03
424
200
0.3±0.03
426
200
0.3±0.03
428
200
0.3±0.03
430
200
0.3±0.03
432
200
0.3±0.03
434
200
0.3±0.03
436
200
0.3±0.03
438
200
0.3±0.03
440
200
0.3±0.03
442
200
0.3±0.03
444
200
0.3±0.03
446
200
0.3±0.03
448
200
0.3±0.03
450
200
0.3±0.03
452
200
0.3±0.03
454
200
0.3±0.03
456
200
0.3±0.03
458
200
0.3±0.03
460
200
0.3±0.03
462
200
0.3±0.03
464
200
0.3±0.03
466
200
0.3±0.03
468
200
0.3±0.03
470
200
0.3±0.03
472
200
0.3±0.03
474
200
0.3±0.03
476
200
0.3±0.03
478
200
0.3±0.03
480
200
0.3±0.03
482
200
0.3±0.03
484
200
0.3±0.03
486
200
0.3±0.03
488
200
0.3±0.03
490
200
0.3±0.03
492
200
0.3±0.03
494
200
0.3±0.03
496
200
0.3±0.03
498
200
0.3±0.03
500
200
0.3±0.03
502
200
0.3±0.03
504
200
0.3±0.03
506
200
0.3±0.03
508
200
0.3±0.03
510
200
0.3±0.03
512
200
0.3±0.03
514
200
0.3±0.03
516
200
0.3±0.03
518
200
0.3±0.03
520
200
0.3±0.03
522
200
0.3±0.03
524
200
0.3±0.03
526
200
0.3±0.03
528
200
0.3±0.03
530
200
0.3±0.03
532
200
0.3±0.03
534
200
0.3±0.03
536
200
0.3±0.03
538
200
0.3±0.03
540
200
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●063TYPE
【Temperature Characteristic CG : CG/C0G】 0.3mm thickness（T）
Part number 1
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
CG0R2[]T-F
CG0R3[]T-F
CG0R4[]T-F
CG0R5[]T-F
CG0R6[]T-F
CG0R7[]T-F
CGR75[]T-F
CG0R8[]T-F
CG0R9[]T-F
CG010[]T-F
CG1R1[]T-F
CG1R2[]T-F
CG1R3[]T-F
CG1R4[]T-F
CG1R5[]T-F
CG1R6[]T-F
CG1R7[]T-F
CG1R8[]T-F
CG1R9[]T-F
CG020[]T-F
CG2R1[]T-F
CG2R2[]T-F
CG2R3[]T-F
CG2R4[]T-F
CG2R5[]T-F
CG2R6[]T-F
CG2R7[]T-F
CG2R8[]T-F
CG2R9[]T-F
CG030[]T-F
CG3R1[]T-F
CG3R2[]T-F
CG3R3[]T-F
CG3R4[]T-F
CG3R5[]T-F
CG3R6[]T-F
CG3R7[]T-F
CG3R8[]T-F
CG3R9[]T-F
CG040[]T-F
CG4R1[]T-F
CG4R2[]T-F
CG4R3[]T-F
CG4R4[]T-F
CG4R5[]T-F
CG4R6[]T-F
CG4R7[]T-F
CG4R8[]T-F
CG4R9[]T-F
CG050[]T-F
CG5R1[]T-F
CG5R2[]T-F
CG5R3[]T-F
CG5R4[]T-F
CG5R5[]T-F
CG5R6[]T-F
CG5R7[]T-F
CG5R8[]T-F
CG5R9[]T-F
CG060[]T-F
CG6R1[]T-F
CG6R2[]T-F
CG6R3[]T-F
CG6R4[]T-F
CG6R5[]T-F
CG6R6[]T-F
CG6R7[]T-F
CG6R8[]T-F
CG6R9[]T-F
CG070[]T-F
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance tolerance
0.2
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
20
17
■PARTS NUMBER
Part number 1
Rated voltage
[V]
50
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance tolerance
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
*3
(at 1MHz)
Thickness [mm]
Rated voltage x ％
min
542
200
0.3±0.03
544
200
0.3±0.03
546
200
0.3±0.03
548
200
0.3±0.03
550
200
0.3±0.03
552
200
0.3±0.03
554
200
0.3±0.03
556
200
0.3±0.03
558
200
0.3±0.03
560
200
0.3±0.03
562
200
0.3±0.03
564
200
0.3±0.03
566
200
0.3±0.03
568
200
0.3±0.03
570
200
0.3±0.03
572
200
0.3±0.03
574
200
0.3±0.03
576
200
0.3±0.03
578
200
0.3±0.03
580
200
0.3±0.03
582
200
0.3±0.03
584
200
0.3±0.03
586
200
0.3±0.03
588
200
0.3±0.03
590
200
0.3±0.03
592
200
0.3±0.03
594
200
0.3±0.03
596
200
0.3±0.03
598
200
0.3±0.03
600
200
0.3±0.03
620
200
0.3±0.03
640
200
0.3±0.03
660
200
0.3±0.03
700
200
0.3±0.03
720
200
0.3±0.03
760
200
0.3±0.03
800
200
0.3±0.03
840
200
0.3±0.03
880
200
0.3±0.03
940
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
UMK063 CG7R1[]T-F
UMK063 CG7R2[]T-F
UMK063 CG7R3[]T-F
UMK063 CG7R4[]T-F
UMK063 CG7R5[]T-F
UMK063 CG7R6[]T-F
UMK063 CG7R7[]T-F
UMK063 CG7R8[]T-F
UMK063 CG7R9[]T-F
UMK063 CG080[]T-F
UMK063 CG8R1[]T-F
UMK063 CG8R2[]T-F
UMK063 CG8R3[]T-F
UMK063 CG8R4[]T-F
UMK063 CG8R5[]T-F
UMK063 CG8R6[]T-F
UMK063 CG8R7[]T-F
UMK063 CG8R8[]T-F
UMK063 CG8R9[]T-F
UMK063 CG090[]T-F
UMK063 CG9R1[]T-F
UMK063 CG9R2[]T-F
UMK063 CG9R3[]T-F
UMK063 CG9R4[]T-F
UMK063 CG9R5[]T-F
UMK063 CG9R6[]T-F
UMK063 CG9R7[]T-F
UMK063 CG9R8[]T-F
UMK063 CG9R9[]T-F
UMK063 CG100DT-F
UMK063 CG110JT-F
UMK063 CG120JT-F
UMK063 CG130JT-F
UMK063 CG150JT-F
UMK063 CG160JT-F
UMK063 CG180JT-F
UMK063 CG200JT-F
UMK063 CG220JT-F
UMK063 CG240JT-F
UMK063 CG270JT-F
UMK063 CG300JT-F
UMK063 CG330JT-F
UMK063 CG360JT-F
UMK063 CG390JT-F
UMK063 CG430JT-F
UMK063 CG470JT-F
UMK063 CG510JT-F
UMK063 CG560JT-F
UMK063 CG620JT-F
UMK063 CG680JT-F
UMK063 CG750JT-F
UMK063 CG820JT-F
UMK063 CG910JT-F
UMK063 CG101JT-F
UMK063 CG111JT-F
UMK063 CG121JT-F
UMK063 CG131JT-F
UMK063 CG151JT-F
UMK063 CG181JT-F
UMK063 CG201JT-F
UMK063 CG221JT-F
TMK063 CG241JT-F
TMK063 CG271JT-F
TMK063 CG301JT-F
TMK063 CG331JT-F
TMK063 CG361JT-F
TMK063 CG391JT-F
TMK063 CG431JT-F
TMK063 CG471JT-F
TMK063 CG511JT-F
TMK063 CG561JT-F
TMK063 CG621JT-F
TMK063 CG681JT-F
TMK063 CG751JT-F
TMK063 CG821JT-F
TMK063 CG911JT-F
TMK063 CG102JT-F
Part number 2
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
21
■PARTS NUMBER
●105TYPE
【Temperature Characteristic CG : CG/C0G】 0.5mm thickness（V）
Part number 1
CERAMIC CAPACITORS
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
Part number 2
CG0R5CV-F
CG010CV-F
CG1R5CV-F
CG020CV-F
CG030CV-F
CG040CV-F
CG050CV-F
CG060DV-F
CG070DV-F
CG080DV-F
CG090DV-F
CG100DV-F
CG120JV-F
CG150JV-F
CG180JV-F
CG220JV-F
CG270JV-F
CG330JV-F
CG390JV-F
CG470JV-F
CG560JV-F
CG680JV-F
CG820JV-F
CG101JV-F
CG121JV-F
CG151JV-F
CG181JV-F
CG221JV-F
CG271JV-F
CG331JV-F
CG391JV-F
CG471JV-F
CG561JV-F
CG681JV-F
CG821JV-F
CG102JV-F
Rated voltage
[V]
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
50
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance tolerance
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
410
200
0.5±0.05
420
200
0.5±0.05
430
200
0.5±0.05
440
200
0.5±0.05
460
200
0.5±0.05
480
200
0.5±0.05
500
200
0.5±0.05
520
200
0.5±0.05
540
200
0.5±0.05
560
200
0.5±0.05
580
200
0.5±0.05
600
200
0.5±0.05
640
200
0.5±0.05
700
200
0.5±0.05
760
200
0.5±0.05
840
200
0.5±0.05
940
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated
voltage
x％
min
410
200
0.5±0.05
420
200
0.5±0.05
430
200
0.5±0.05
440
200
0.5±0.05
460
200
0.5±0.05
480
200
0.5±0.05
500
200
0.5±0.05
520
200
0.5±0.05
540
200
0.5±0.05
560
200
0.5±0.05
580
200
0.5±0.05
600
200
0.5±0.05
640
200
0.5±0.05
700
200
0.5±0.05
760
200
0.5±0.05
840
200
0.5±0.05
940
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated
voltage
x％
min
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
【Temperature Characteristic U△ : U△/U2△】 0.5mm thickness（V）
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
Part number 2
UK0R5CV-F
UK010CV-F
UK1R5CV-F
UK020CV-F
UK030CV-F
UJ040CV-F
UJ050CV-F
UJ060DV-F
UJ070DV-F
UJ080DV-F
UJ090DV-F
UJ100DV-F
UJ120JV-F
UJ150JV-F
UJ180JV-F
UJ220JV-F
UJ270JV-F
UJ330JV-F
UJ390JV-F
UJ470JV-F
UJ560JV-F
UJ680JV-F
UJ820JV-F
UJ101JV-F
UJ121JV-F
UJ151JV-F
UJ181JV-F
UJ221JV-F
UJ271JV-F
UJ331JV-F
Rated voltage
[V]
Temperature
characteristics
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
50
U2K
U2K
U2K
U2K
U2K
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
Capacitance
[F]
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
【Temperature Characteristic SL】 0.5mm thickness（V）
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
SL121JV-F
SL151JV-F
SL181JV-F
SL221JV-F
SL271JV-F
SL331JV-F
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
SL
SL
SL
SL
SL
SL
Capacitance
[F]
120
150
180
220
270
330
p
p
p
p
p
p
Capacitance tolerance
±5％
±5％
±5％
±5％
±5％
±5％
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
22
17
■PARTS NUMBER
Multilayer Ceramic Capacitors for High Frequency Applications (1GHz+)
●042TYPE
【Temperature Characteristic CG : CG/C0G】 0.2mm thickness（C）
Part number 1
Rated voltage
[V]
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance tolerance
0.2
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.05pF, ±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
(at 1GHz)
Thickness*3 [mm]
Rated voltage x ％
(min)
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
300
200
0.2±0.02
280
200
0.2±0.02
270
200
0.2±0.02
260
200
0.2±0.02
250
200
0.2±0.02
240
200
0.2±0.02
230
200
0.2±0.02
220
200
0.2±0.02
210
200
0.2±0.02
200
200
0.2±0.02
190
200
0.2±0.02
185
200
0.2±0.02
180
200
0.2±0.02
175
200
0.2±0.02
170
200
0.2±0.02
160
200
0.2±0.02
155
200
0.2±0.02
150
200
0.2±0.02
140
200
0.2±0.02
135
200
0.2±0.02
130
200
0.2±0.02
125
200
0.2±0.02
125
200
0.2±0.02
120
200
0.2±0.02
120
200
0.2±0.02
110
200
0.2±0.02
110
200
0.2±0.02
110
200
0.2±0.02
100
200
0.2±0.02
100
200
0.2±0.02
90
200
0.2±0.02
90
200
0.2±0.02
85
200
0.2±0.02
85
200
0.2±0.02
85
200
0.2±0.02
85
200
0.2±0.02
85
200
0.2±0.02
85
200
0.2±0.02
80
200
0.2±0.02
80
200
0.2±0.02
80
200
0.2±0.02
75
200
0.2±0.02
75
200
0.2±0.02
75
200
0.2±0.02
70
200
0.2±0.02
70
200
0.2±0.02
70
200
0.2±0.02
70
200
0.2±0.02
70
200
0.2±0.02
65
200
0.2±0.02
65
200
0.2±0.02
65
200
0.2±0.02
65
200
0.2±0.02
65
200
0.2±0.02
65
200
0.2±0.02
65
200
0.2±0.02
60
200
0.2±0.02
60
200
0.2±0.02
60
200
0.2±0.02
60
200
0.2±0.02
60
200
0.2±0.02
60
200
0.2±0.02
60
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
55
200
0.2±0.02
50
200
0.2±0.02
50
200
0.2±0.02
50
200
0.2±0.02
50
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
TVS042 CG0R2[]C-W
TVS042 CG0R3[]C-W
TVS042 CG0R4[]C-W
TVS042 CG0R5[]C-W
TVS042 CG0R6[]C-W
TVS042 CG0R7[]C-W
TVS042 CGR75[]C-W
TVS042 CG0R8[]C-W
TVS042 CG0R9[]C-W
TVS042 CG010[]C-W
TVS042 CG1R1[]C-W
TVS042 CG1R2[]C-W
TVS042 CG1R3[]C-W
TVS042 CG1R4[]C-W
TVS042 CG1R5[]C-W
TVS042 CG1R6[]C-W
TVS042 CG1R7[]C-W
TVS042 CG1R8[]C-W
TVS042 CG1R9[]C-W
TVS042 CG020[]C-W
TVS042 CG2R1[]C-W
TVS042 CG2R2[]C-W
TVS042 CG2R3[]C-W
TVS042 CG2R4[]C-W
TVS042 CG2R5[]C-W
TVS042 CG2R6[]C-W
TVS042 CG2R7[]C-W
TVS042 CG2R8[]C-W
TVS042 CG2R9[]C-W
TVS042 CG030[]C-W
TVS042 CG3R1[]C-W
TVS042 CG3R2[]C-W
TVS042 CG3R3[]C-W
TVS042 CG3R4[]C-W
TVS042 CG3R5[]C-W
TVS042 CG3R6[]C-W
TVS042 CG3R7[]C-W
TVS042 CG3R8[]C-W
TVS042 CG3R9[]C-W
TVS042 CG040[]C-W
TVS042 CG4R1[]C-W
TVS042 CG4R2[]C-W
TVS042 CG4R3[]C-W
TVS042 CG4R4[]C-W
TVS042 CG4R5[]C-W
TVS042 CG4R6[]C-W
TVS042 CG4R7[]C-W
TVS042 CG4R8[]C-W
TVS042 CG4R9[]C-W
TVS042 CG050[]C-W
TVS042 CG5R1[]C-W
TVS042 CG5R2[]C-W
TVS042 CG5R3[]C-W
TVS042 CG5R4[]C-W
TVS042 CG5R5[]C-W
TVS042 CG5R6[]C-W
TVS042 CG5R7[]C-W
TVS042 CG5R8[]C-W
TVS042 CG5R9[]C-W
TVS042 CG060[]C-W
TVS042 CG6R1[]C-W
TVS042 CG6R2[]C-W
TVS042 CG6R3[]C-W
TVS042 CG6R4[]C-W
TVS042 CG6R5[]C-W
TVS042 CG6R6[]C-W
TVS042 CG6R7[]C-W
TVS042 CG6R8[]C-W
TVS042 CG6R9[]C-W
TVS042 CG070[]C-W
TVS042 CG7R1[]C-W
TVS042 CG7R2[]C-W
TVS042 CG7R3[]C-W
TVS042 CG7R4[]C-W
TVS042 CG7R5[]C-W
TVS042 CG7R6[]C-W
TVS042 CG7R7[]C-W
TVS042 CG7R8[]C-W
TVS042 CG7R9[]C-W
TVS042 CG080[]C-W
TVS042 CG8R1[]C-W
TVS042 CG8R2[]C-W
TVS042 CG8R3[]C-W
TVS042 CG8R4[]C-W
TVS042 CG8R5[]C-W
Part number 2
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
23
■PARTS NUMBER
Part number 1
CERAMIC CAPACITORS
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
Part number 2
CG8R6[]C-W
CG8R7[]C-W
CG8R8[]C-W
CG8R9[]C-W
CG090[]C-W
CG9R1[]C-W
CG9R2[]C-W
CG9R3[]C-W
CG9R4[]C-W
CG9R5[]C-W
CG9R6[]C-W
CG9R7[]C-W
CG9R8[]C-W
CG9R9[]C-W
CG100[]C-W
CG110JC-W
CG120JC-W
CG130JC-W
CG150JC-W
CG160JC-W
CG180JC-W
CG220JC-W
Rated voltage
[V]
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
22
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±0.1pF, ±0.25pF, ±0.5pF
±2%, ±5%
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1GHz)
Thickness*3 [mm]
Rated voltage x ％
(min)
50
200
0.2±0.02
50
200
0.2±0.02
50
200
0.2±0.02
50
200
0.2±0.02
50
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
45
200
0.2±0.02
40
200
0.2±0.02
40
200
0.2±0.02
40
200
0.2±0.02
40
200
0.2±0.02
40
200
0.2±0.02
40
200
0.2±0.02
30
200
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1GHz)
Thickness*3 [mm]
Rated
voltage
x％
(min)
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
280
200
0.5±0.05
270
200
0.5±0.05
260
200
0.5±0.05
240
200
0.5±0.05
230
200
0.5±0.05
210
200
0.5±0.05
190
200
0.5±0.05
180
200
0.5±0.05
170
200
0.5±0.05
150
200
0.5±0.05
130
200
0.5±0.05
120
200
0.5±0.05
110
200
0.5±0.05
99
200
0.5±0.05
84
200
0.5±0.05
84
200
0.5±0.05
84
200
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Q
HTLT
(at 1GHz)
Thickness*3 [mm]
Rated voltage x ％
(min)
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
300
200
0.5±0.05
280
200
0.5±0.05
270
200
0.5±0.05
260
200
0.5±0.05
240
200
0.5±0.05
230
200
0.5±0.05
210
200
0.5±0.05
190
200
0.5±0.05
180
200
0.5±0.05
170
200
0.5±0.05
150
200
0.5±0.05
130
200
0.5±0.05
120
200
0.5±0.05
110
200
0.5±0.05
99
200
0.5±0.05
84
200
0.5±0.05
84
200
0.5±0.05
84
200
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●105TYPE
【Temperature Characteristic CG : CG/C0G】 0.5mm thickness（W）
Part number 1
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
Part number 2
CG0R3BW-F
CG0R4BW-F
CG0R5BW-F
CG0R6BW-F
CG0R7BW-F
CG0R8BW-F
CG0R9BW-F
CG010BW-F
CG1R1BW-F
CG1R2BW-F
CG1R3BW-F
CG1R5BW-F
CG1R6BW-F
CG1R8BW-F
CG020BW-F
CG2R2JW-F
CG2R4JW-F
CG2R7JW-F
CG030JW-F
CG3R3JW-F
CG3R6JW-F
CG3R9JW-F
CG4R3JW-F
CG4R7JW-F
CG5R1JW-F
Rated voltage
[V]
16
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
【Temperature Characteristic CG : CG/C0G】 0.5mm thickness（W）
Part number 1
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
CG0R3BW-F
CG0R4BW-F
CG0R5BW-F
CG0R6BW-F
CG0R7BW-F
CG0R8BW-F
CG0R9BW-F
CG010BW-F
CG1R1BW-F
CG1R2BW-F
CG1R3BW-F
CG1R5BW-F
CG1R6BW-F
CG1R8BW-F
CG020BW-F
CG2R2JW-F
CG2R4JW-F
CG2R7JW-F
CG030JW-F
CG3R3JW-F
CG3R6JW-F
CG3R9JW-F
CG4R3JW-F
CG4R7JW-F
CG5R1JW-F
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
24
17
■PARTS NUMBER
Super Low Distortion Multilayer Ceramic Capacitors
●105TYPE
【Temperature Characteristic SD : Standard】 0.5mm thickness（V）
Part number 1
Part number 2
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10
±10
0.1
0.1
200
200
50
25
16
10
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Thickness*3 [mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic SD : Standard】 0.3mm thickness（P）
Part number 1
Part number 2
LMK105 SD152KP-F
JMK105 SD272KP-F
Rated voltage
[V]
Temperature
characteristics
10
6.3
Standard Type
Capacitance
[F]
1500 p
2700 p
HTLT
Thickness*3 [mm]
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
●107TYPE
【Temperature Characteristic SD : Standard】 0.8mm thickness（A）
Part number 1
Part number 2
UMK107 SD102KA-T
UMK107 SD122KA-T
UMK107 SD152KA-T
UMK107 SD182KA-T
UMK107 SD222KA-T
UMK107 SD272KA-T
UMK107 SD332KA-T
TMK107 SD392KA-T
TMK107 SD472KA-T
EMK107 SD562KA-T
EMK107 SD682KA-T
EMK107 SD822KA-T
EMK107 SD103KA-T
LMK107 SD123KA-T
LMK107 SD153KA-T
LMK107 SD183KA-T
LMK107 SD223KA-T
Rated voltage
[V]
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.01
0.012
0.015
0.018
0.022
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
50
25
HTLT
Temperature
characteristics
16
10
p
p
p
p
p
p
p
p
p
p
p
p
μ
μ
μ
μ
μ
Thickness*3 [mm]
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
CERAMIC CAPACITORS
UMK105 SD391KV-F
UMK105 SD471KV-F
UMK105 SD561KV-F
TMK105 SD681KV-F
TMK105 SD821KV-F
TMK105 SD102KV-F
TMK105 SD122KV-F
EMK105 SD152KV-F
EMK105 SD182KV-F
EMK105 SD222KV-F
EMK105 SD272KV-F
LMK105 SD332KV-F
LMK105 SD392KV-F
LMK105 SD472KV-F
Rated voltage
[V]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●212TYPE
【Temperature Characteristic SD : Standard】 1.25mm thickness（G）
Part number 1
Part number 2
GMK212 SD183KG-T
GMK212 SD223KG-T
GMK212 SD273KG-T
LMK212 SD683KG-T
LMK212 SD823KG-T
LMK212 SD104KG-T
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
0.018
0.022
0.027
0.068
0.082
0.1
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
35
10
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
【Temperature Characteristic SD : Standard】 0.85mm thickness（D）
Part number 1
Part number 2
UMK212 SD392KD-T
UMK212 SD472KD-T
UMK212 SD562KD-T
UMK212 SD682KD-T
UMK212 SD822KD-T
UMK212 SD103KD-T
GMK212 SD123KD-T
GMK212 SD153KD-T
EMK212 SD333KD-T
LMK212 SD473KD-T
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
3900
4700
5600
6800
8200
0.01
0.012
0.015
0.033
0.047
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10
±10
0.1
0.1
200
200
50
35
16
10
p
p
p
p
p
μ
μ
μ
μ
μ
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
●316TYPE
【Temperature Characteristic SD : Standard】 1.6mm thickness（L）
Part number 1
TMK316 SD823KL-T
TMK316 SD104KL-T
Part number 2
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
25
Standard Type
0.082 μ
0.1 μ
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
25
■PARTS NUMBER
【Temperature Characteristic SD : Standard】 1.15mm thickness（F）
Part number 1
Part number 2
GMK316 SD333KF-T
GMK316 SD393KF-T
TMK316 SD473KF-T
TMK316 SD563KF-T
TMK316 SD683KF-T
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
0.033
0.039
0.047
0.056
0.068
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
10
10
10
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
10
10
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±10，±20
10
10
10
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
10
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
5
10
150
200
35
25
μ
μ
μ
μ
μ
Thickness*3 [mm]
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
Low Distortion High Value Multilayer Ceramic Capacitors(CF_LD)
CERAMIC CAPACITORS
●107TYPE
【Temperature Characteristic LD : X5R】 0.8mm thickness（A）
Part number 1
Part number 2
UMK107BLD224[]A-T
TMK107BLD474[]A-T
TMK107BLD105[]A-T
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
0.22 μ
0.47 μ
1μ
Temperature
characteristics
Capacitance
[F]
X5R
X5R
1μ
2.2 μ
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
1μ
4.7 μ
10 μ
Temperature
characteristics
Capacitance
[F]
X5R
1μ
Temperature
characteristics
Capacitance
[F]
X5R
X5R
1.5 μ
4.7 μ
50
25
HTLT
Thickness*3 [mm]
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
●212TYPE
【Temperature Characteristic LD : X5R】 1.25mm thickness（G）
Part number 1
Part number 2
GMK212 LD105[]G-T
GMK212BLD225[]G-T
Rated voltage
[V]
35
HTLT
Thickness*3 [mm]
1.25±0.10
1.25+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
●316TYPE
【Temperature Characteristic LD : X5R】 1.6mm thickness（L）
Part number 1
Part number 2
UMK316 LD105[]L-T
GMK316BLD475[]L-T
TMK316BLD106[]L-T
Rated voltage
[V]
50
35
25
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.30
1.6±0.30
Soldering
R:Reflow
W:Wave
R
R
R
●325TYPE
【Temperature Characteristic LD : X5R】 1.9mm thickness（N）
Part number 1
Part number 2
UMK325 LD105[]N-T
Rated voltage
[V]
50
HTLT
Thickness*3 [mm]
1.9±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic LD : X5R】 2.5mm thickness（M）
Part number 1
UMK325 LD155[]M-P
UMK325 LD475[]M-P
Part number 2
Rated voltage
[V]
50
HTLT
Thickness*3 [mm]
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
26
17
■PARTS NUMBER
Medium-High Voltage Multilayer Ceramic Capacitors
●105TYPE
【Temperature Characteristic B7 : X7R】 0.5mm thickness（V）
Part number 1
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
Part number 2
B7221[]V-F
B7331[]V-F
B7471[]V-F
B7681[]V-F
B7102[]V-F
B7152[]V-F
B7222[]V-F
B7332[]V-F
B7472[]V-F
Rated voltage
[V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
220
330
470
680
1000
1500
2200
3300
4700
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
200
p
p
p
p
p
p
p
p
p
Thickness*3 [mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
Part number 1
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
HMK105
Part number 2
CG080DV-F
CG090DV-F
CG100DV-F
CG120JV-F
CG150JV-F
CG180JV-F
CG220JV-F
CG240JV-F
CG270JV-F
CG330JV-F
CG390JV-F
CG470JV-F
CG560JV-F
CG680JV-F
CG820JV-F
CG101JV-F
Rated voltage
[V]
100
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
8
9
10
12
15
18
22
24
27
33
39
47
56
68
82
100
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance tolerance
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Thickness*3 [mm]
Rated voltage x ％
min
560
200
0.5±0.05
580
200
0.5±0.05
600
200
0.5±0.05
640
200
0.5±0.05
700
200
0.5±0.05
760
200
0.5±0.05
840
200
0.5±0.05
880
200
0.5±0.05
940
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
【Temperature Characteristic CG : CG/C0G】 0.5mm thickness（V）
●107TYPE
【Temperature Characteristic BJ : B/X5R】 0.8mm thickness（A）
Part number 1
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
Part number 2
BJ102[]A-T
BJ152[]A-T
BJ222[]A-T
BJ332[]A-T
BJ472[]A-T
BJ682[]A-T
BJ103[]A-T
BJ153[]A-T
BJ223[]A-T
BJ333[]A-T
BJ473[]A-T
BJ104[]A-T
BJ224[]A-TE
Rated voltage
[V]
100
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1000
1500
2200
3300
4700
6800
0.01
0.015
0.022
0.033
0.047
0.1
0.22
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
200
200
200
200
200
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
150
p
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C7 : X7S 】 0.8mm thickness（A）
Part number 1
Part number 2
HMK107 C7224[]A-TE
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
X7S
0.22 μ
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1000
1500
2200
3300
4700
6800
0.01
0.015
0.022
0.033
0.047
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
200
200
200
200
200
200
200
200
200
200
200
200
100
Thickness*3 [mm]
0.8±0.10
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R 】 0.8mm thickness（A）
Part number 1
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
B7102[]A-T
B7152[]A-T
B7222[]A-T
B7332[]A-T
B7472[]A-T
B7682[]A-T
B7103[]A-T
B7153[]A-T
B7223[]A-T
B7333[]A-T
B7473[]A-T
B7104[]A-T
Part number 2
Rated voltage
[V]
100
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
p
p
p
p
p
p
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
27
■PARTS NUMBER
【Temperature Characteristic SD : Standard 】 0.8mm thickness（A）
Part number 1
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
Part number 2
SD101KA-T
SD121KA-T
SD151KA-T
SD181KA-T
SD221KA-T
SD271KA-T
SD331KA-T
SD391KA-T
SD471KA-T
SD561KA-T
SD681KA-T
SD821KA-T
SD102KA-T
Rated voltage
[V]
100
HTLT
CERAMIC CAPACITORS
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
100
120
150
180
220
270
330
390
470
560
680
820
1000
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
200
200
200
200
200
200
200
200
200
200
200
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.22
0.47
1
4700
6800
0.01
0.015
0.022
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1000
1500
2200
3300
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
3.5
3.5
150
150
p
p
p
p
p
p
p
p
p
p
p
p
p
Thickness*3 [mm]
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
●212TYPE
【Temperature Characteristic BJ : B/X5R】 1.25mm thickness（G）
Part number 1
Part number 2
HMK212 BJ103[]G-T
HMK212 BJ153[]G-T
HMK212 BJ223[]G-T
HMK212 BJ333[]G-T
HMK212 BJ473[]G-T
HMK212 BJ683[]G-T
HMK212 BJ104[]G-T
HMK212 BJ224[]G-T
HMK212 BJ474[]G-TE
HMK212BBJ105[]G-TE
QMK212 BJ472[]G-T
QMK212 BJ682[]G-T
QMK212 BJ103[]G-T
QMK212 BJ153[]G-T
QMK212 BJ223[]G-T
Rated voltage
[V]
100
250
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
p
p
μ
μ
μ
HTLT
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
QMK212
QMK212
QMK212
QMK212
Part number 2
BJ102[]D-T
BJ152[]D-T
BJ222[]D-T
BJ332[]D-T
Rated voltage
[V]
250
Temperature
characteristics
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
p
p
p
p
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic C7 : X7S】 1.25mm thickness（G）
Part number 1
Part number 2
HMK212 C7474[]G-TE
HMK212BC7105[]G-TE
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
X7S
X7S
0.47 μ
1μ
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.22
4700
6800
0.01
0.015
0.022
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1000
1500
2200
3300
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
150
150
150
150
100
100
Thickness*3 [mm]
1.25±0.10
1.25+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
【Temperature Characteristic B7 : X7R】 1.25mm thickness（G）
Part number 1
Part number 2
HMK212 B7103[]G-T
HMK212 B7153[]G-T
HMK212 B7223[]G-T
HMK212 B7333[]G-T
HMK212 B7473[]G-T
HMK212 B7683[]G-T
HMK212 B7104[]G-T
HMK212 B7224[]G-T
QMK212 B7472[]G-T
QMK212 B7682[]G-T
QMK212 B7103[]G-T
QMK212 B7153[]G-T
QMK212 B7223[]G-T
Rated voltage
[V]
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
250
μ
μ
μ
μ
μ
μ
μ
μ
p
p
μ
μ
μ
HTLT
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.85mm thickness（D）
Part number 1
QMK212
QMK212
QMK212
QMK212
B7102[]D-T
B7152[]D-T
B7222[]D-T
B7332[]D-T
Part number 2
Rated voltage
[V]
250
Temperature
characteristics
X7R
X7R
X7R
X7R
p
p
p
p
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
28
17
■PARTS NUMBER
【Temperature Characteristic SD : Standard 】 0.85mm thickness（D）
Part number 1
Part number 2
HTLT
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
Standard Type
2200
4700
100
120
150
180
220
330
390
470
560
680
820
1000
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
200
200
150
150
150
150
150
150
150
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10
0.1
200
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.047
0.068
0.1
0.15
0.22
0.33
0.47
1
2.2
0.033
0.047
0.068
0.1
0.015
0.022
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
150
120
120
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1000
1500
2200
3300
4700
6800
0.01
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
120
120
120
120
120
120
120
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
150
100
250
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic SD : Standard 】 1.25mm thickness（G）
Part number 1
Part number 2
HMK212 SD392KG-T
Rated voltage
[V]
Temperature
characteristics
100
Standard Type
Capacitance
[F]
3900 p
HTLT
Thickness*3 [mm]
1.25±0.10
Soldering
R:Reflow
W:Wave
R
●316TYPE
【Temperature Characteristic BJ : B/X5R】 1.6mm thickness（L）
Part number 1
Part number 2
HMK316 BJ473[]L-T
HMK316 BJ683[]L-T
HMK316 BJ104[]L-T
HMK316 BJ154[]L-T
HMK316 BJ224[]L-T
HMK316 BJ334[]L-T
HMK316 BJ474[]L-T
HMK316 BJ105[]L-T
HMK316ABJ225[]L-TE
QMK316 BJ333[]L-T
QMK316 BJ473[]L-T
QMK316 BJ683[]L-T
QMK316 BJ104[]L-T
SMK316 BJ153[]L-T
SMK316 BJ223[]L-T
Rated voltage
[V]
100
250
630
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
HMK212 SD222KD-T
HMK212 SD472KD-T
QMK212 SD101KD-T
QMK212 SD121KD-T
QMK212 SD151KD-T
QMK212 SD181KD-T
QMK212 SD221KD-T
QMK212 SD331KD-T
QMK212 SD391KD-T
QMK212 SD471KD-T
QMK212 SD561KD-T
QMK212 SD681KD-T
QMK212 SD821KD-T
QMK212 SD102KD-T
Rated voltage
[V]
【Temperature Characteristic BJ : B/X5R】 1.15mm thickness（F）
Part number 1
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
Part number 2
BJ102[]F-T
BJ152[]F-T
BJ222[]F-T
BJ332[]F-T
BJ472[]F-T
BJ682[]F-T
BJ103[]F-T
Rated voltage
[V]
630
Temperature
characteristics
B
B
B
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
p
p
p
p
p
p
μ
HTLT
Thickness*3 [mm]
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
【Temperature Characteristic C7 : X7S】 1.6mm thickness（L）
Part number 1
Part number 2
HMK316AC7225[]L-TE
Rated voltage
[V]
HTLT
Temperature
characteristics
Capacitance
[F]
X7S
2.2 μ
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.047
0.068
0.1
0.15
0.22
0.33
0.47
1
0.033
0.047
0.068
0.1
0.015
0.022
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
200
200
150
150
150
150
120
120
100
Thickness*3 [mm]
1.6±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R】 1.6mm thickness（L）
Part number 1
HMK316 B7473[]L-T
HMK316 B7683[]L-T
HMK316 B7104[]L-T
HMK316 B7154[]L-T
HMK316 B7224[]L-T
HMK316 B7334[]L-T
HMK316 B7474[]L-T
HMK316 B7105[]L-T
QMK316 B7333[]L-T
QMK316 B7473[]L-T
QMK316 B7683[]L-T
QMK316 B7104[]L-T
SMK316 B7153[]L-T
SMK316 B7223[]L-T
Part number 2
Rated voltage
[V]
100
250
630
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
29
■PARTS NUMBER
【Temperature Characteristic B7 : X7R】 1.15mm thickness（F）
Part number 1
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
Part number 2
B7102[]F-T
B7152[]F-T
B7222[]F-T
B7332[]F-T
B7472[]F-T
B7682[]F-T
B7103[]F-T
Rated voltage
[V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
630
HTLT
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
1000
1500
2200
3300
4700
6800
0.01
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
120
120
120
120
120
120
120
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10
±10
0.1
0.1
200
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
3.5
3.5
200
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.15
0.22
0.33
0.47
0.68
1
4.7
0.047
0.1
0.15
0.22
0.022
0.033
0.047
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
150
150
150
150
150
120
120
120
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
200
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
200
p
p
p
p
p
p
μ
Thickness*3 [mm]
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
【Temperature Characteristic SD : Standard 】 1.6mm thickness（L）
Part number 1
Part number 2
CERAMIC CAPACITORS
HMK316 SD223KL-T
QMK316 SD103KL-T
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
100
250
Standard Type
0.022 μ
0.01 μ
HTLT
Thickness*3 [mm]
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
●325TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Part number 1
Part number 2
HMK325 BJ225[]M-P
HMK325 BJ475[]M-PE
Rated voltage
[V]
100
100
Temperature
characteristics
Capacitance
[F]
X5R*1
X5R*1
2.2 μ
4.7 μ
B
B
HTLT
Thickness*3 [mm]
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
【Temperature Characteristic BJ : B/X5R】 1.9mm thickness（N）
Part number 1
Part number 2
HMK325 BJ154[]N-T
HMK325 BJ224[]N-T
HMK325 BJ334[]N-T
HMK325 BJ474[]N-T
HMK325 BJ684[]N-T
HMK325 BJ105[]N-T
HMK325 BJ475[]N-TE
QMK325 BJ473[]N-T
QMK325 BJ104[]N-T
QMK325 BJ154[]N-T
QMK325 BJ224[]N-T
SMK325 BJ223[]N-T
SMK325 BJ333[]N-T
SMK325 BJ473[]N-T
Rated voltage
[V]
100
250
630
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 1.15mm thickness（F）
Part number 1
Part number 2
HMK325 BJ104[]F-T
Rated voltage
[V]
100
HTLT
Temperature
characteristics
Capacitance
[F]
X5R*1
0.1 μ
Temperature
characteristics
Capacitance
[F]
X7R
2.2 μ
Temperature
characteristics
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.15
0.22
0.33
0.47
0.68
1
0.047
0.1
0.15
0.22
0.022
0.033
0.047
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
200
200
150
150
150
150
120
120
120
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
150
B
Thickness*3 [mm]
1.15±0.10
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Part number 1
Part number 2
HMK325 B7225[]M-P
Rated voltage
[V]
100
HTLT
Thickness*3 [mm]
2.5±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R】 1.9mm thickness（N）
Part number 1
Part number 2
HMK325 B7154[]N-T
HMK325 B7224[]N-T
HMK325 B7334[]N-T
HMK325 B7474[]N-T
HMK325 B7684[]N-T
HMK325 B7105[]N-T
QMK325 B7473[]N-T
QMK325 B7104[]N-T
QMK325 B7154[]N-T
QMK325 B7224[]N-T
SMK325 B7223[]N-T
SMK325 B7333[]N-T
SMK325 B7473[]N-T
Rated voltage
[V]
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
250
630
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C7 : X7S】 2.5mm thickness（M）
Part number 1
Part number 2
HMK325 C7475[]M-PE
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X7S
4.7 μ
Temperature
characteristics
Capacitance
[F]
X7S
4.7 μ
100
HTLT
Thickness*3 [mm]
2.5±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic C7 : X7S】 1.9mm thickness（N）
Part number 1
HMK325 C7475[]N-TE
Part number 2
Rated voltage
[V]
100
HTLT
Thickness*3 [mm]
1.9±0.20
Soldering
R:Reflow
W:Wave
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
30
17
■PARTS NUMBER
【Temperature Characteristic B7 : X7R】 1.15mm thickness（F）
Part number 1
Part number 2
HMK325 B7104[]F-T
Rated voltage
[V]
Temperature
characteristics
Capacitance
[F]
X7R
0.1 μ
100
HTLT
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
3.5
200
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.47
1
1.5
2.2
0.1
0.22
0.33
0.47
0.047
0.068
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
150
150
150
150
120
120
120
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.47
1
1.5
2.2
0.1
0.22
0.33
0.47
0.047
0.068
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
200
200
200
200
150
150
150
150
120
120
120
Thickness*3 [mm]
1.15±0.10
Soldering
R:Reflow
W:Wave
R
●432TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Part number 1
Part number 2
100
250
630
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
X5R*1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Part number 1
HMK432 B7474[]M-T
HMK432 B7105[]M-T
HMK432 B7155[]M-T
HMK432 B7225[]M-T
QMK432 B7104[]M-T
QMK432 B7224[]M-T
QMK432 B7334[]M-T
QMK432 B7474[]M-T
SMK432 B7473[]M-T
SMK432 B7683[]M-T
SMK432 B7104[]M-T
Part number 2
Rated voltage
[V]
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
HMK432 BJ474[]M-T
HMK432 BJ105[]M-T
HMK432 BJ155[]M-T
HMK432 BJ225[]M-T
QMK432 BJ104[]M-T
QMK432 BJ224[]M-T
QMK432 BJ334[]M-T
QMK432 BJ474[]M-T
SMK432 BJ473[]M-T
SMK432 BJ683[]M-T
SMK432 BJ104[]M-T
Rated voltage
[V]
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
17
31
■PARTS NUMBER
TM
LW Reversal Decoupling Capacitors（LWDC ）
●105TYPE
【Temperature Characteristic BJ : X5R】 0.3mm thickness（P）
Part number 1
Part number 2
TWK105 BJ104MP-F
EWK105 BJ224MP-F
LWK105 BJ474MP-F
JWK105 BJ104MP-F
JWK105 BJ474MP-F
JWK105 BJ105MP-F
JWK105 BJ225MP-F
Rated voltage
[V]
Temperature
characteristics
25
16
10
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
0.1
0.47
1
2.2
±20
±20
±20
±20
±20
±20
±20
5
10
10
5
10
10
10
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.1
0.22
0.1
0.22
0.47
0.22
0.47
1
2.2
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
10
5
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
2.2
1
2.2
4.7
10
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
5
10
10
10
10
10
10
150
150
150
150
150
150
150
150
150
Capacitance
[F]
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
0.1
0.22
0.47
1
2.2
4.7
10
±20
±20
±20
±20
±20
±20
±20
5
5
5
10
10
10
10
150
150
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±20
±10，±20
±20
±20
10
10
10
10
10
150
150
150
150
150
Capacitance tolerance
[％]
tanδ
[％]
Rated voltage x ％
±10，±20
±10，±20
±20
±20
5
10
10
10
150
150
150
150
X5R
X5R
X5R
X5R*1
X5R*1
X5R
X5R
6.3
HTLT
Capacitance
[F]
μ
μ
μ
μ
μ
μ
μ
Thickness*3 [mm]
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S , C7 : X7S】 0.3mm thickness（P）
CERAMIC CAPACITORS
Part number 1
Part number 2
EWK105 C6104MP-F
LWK105 C7104MP-F
LWK105 C6224MP-F
JWK105 C7104MP-F
JWK105 C7224MP-F
JWK105 C6474MP-F
AWK105 C6224MP-F
AWK105 C6474MP-F
AWK105 C6105MP-F
AWK105 C6225MP-F
Rated voltage
[V]
Temperature
characteristics
16
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
X6S
10
6.3
4
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
●107TYPE
【Temperature Characteristic BJ : X5R】 0.5mm thickness（V）
Part number 1
Part number 2
TWK107 BJ104MV-T
EWK107 BJ224MV-T
EWK107 BJ474MV-T
LWK107 BJ105MV-T
LWK107 BJ225MV-T
JWK107 BJ105MV-T
JWK107 BJ225MV-T
JWK107 BJ475MV-T
AWK107 BJ106MV-T
Rated voltage
[V]
Temperature
characteristics
X5R*1
X5R*1
X5R*1
X5R
X5R
X5R*1
X5R
X5R
X5R
25
16
10
6.3
4
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R , C6 : X6S , C7 : X7S】 0.5mm thickness（V）
Part number 1
Part number 2
TWK107 B7104MV-T
EWK107 B7224MV-T
EWK107 B7474MV-T
JWK107 C7105MV-T
AWK107 C7225MV-T
AWK107 C6475MV-T
PWK107 C6106MV-T
Rated voltage
[V]
Temperature
characteristics
25
X7R
X7R
X7R
X7S
X7S
X6S
X6S
16
6.3
4
2.5
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
●212TYPE
【Temperature Characteristic BJ : X5R】 0.85mm thickness（D）
Part number 1
Part number 2
Rated voltage
[V]
25
16
TWK212 BJ475[]D-T
EWK212 BJ106MD-T
LWK212 BJ475[]D-T
LWK212 BJ106MD-T
JWK212 BJ226MD-T
10
6.3
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
X5R
X5R
4.7
10
4.7
10
22
μ
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
【Temperature Characteristic B7 : X7R , C6 : X6S】 0.85mm thickness（D）
Part number 1
TWK212 B7225[]D-T
EWK212 C6475[]D-T
LWK212 C6106MD-T
AWK212 C6226MD-T
Part number 2
Rated voltage
[V]
25
16
10
4
Temperature
characteristics
X7R
X6S
X6S
X6S
Capacitance
[F]
2.2
4.7
10
22
μ
μ
μ
μ
HTLT
Thickness*3 [mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
c_mlcc_e-E05R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
32
17
Multilayer Ceramic Capacitors
■PACKAGING
①Minimum Quantity
●Taped package
Thickness
Type(EIA)
□MK021(008004)
□MK042(01005)
□VS042(01005)
□MK063(0201)
□WK105(0204) ※
□MK105(0402)
□VK105(0402)
□MK107(0603)
□WK107(0306) ※
□MR107(0603)
□VS107(0603)
□MJ107(0603)
□MK212(0805)
□WK212(0508) ※
□MR212(0805)
□VS212(0805)
□MJ212(0805)
□MK316(1206)
□MR316(1206)
□MJ316(1206)
□MK325(1210)
□MR325(1210)
□MJ325(1210)
□MK432(1812)
Note : ※ LW Reverse type.
mm
0.125
0.2
0.2
0.3
0.3
0.13
0.18
0.2
0.3
0.5
0.5
0.45
0.5
0.8
0.7
0.8
0.45
0.85
1.25
0.85
0.85
1.25
0.85
1.15
1.6
1.15
1.6
0.85
1.15
1.9
2.0max.
2.5
1.9
2.5
2.5
code
K
C, D
C
P,T
P
H
E
C
P
V
W
K
V
A
C
A
K
D
G
D
D
G
D
F
L
F
L
D
F
N
Y
M
N
M
M
Standard quantity [pcs]
Paper tape
Embossed tape
－
50000
－
40000
15000
10000
－
－
20000
15000
10000
10000
4000
－
4000
4000
3000
－
－
20000
15000
－
－
－
－
－
4000
－
－
3000
4000
－
－
4000
4000
－
4000
－
－
－
－
3000
－
－
2000
－
3000
2000
3000
2000
－
2000
－
－
－
－
1000
2000
500(T), 1000(P)
500
②Taping material
※No bottom tape for pressed carrier tape
●Card board carrier tape
●Embossed tape
Top tape
Top tape
Base tape
Sprocket hole
Sprocket hole
Bottom tape
Chip cavity
Base tape
Chip cavity
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E05R01
Chip filled
Chip
※ LW Reverse type.
③Representative taping dimensions
●Paper Tape（8mm wide）
●Pressed carrier tape（ 2mm pitch）
Unit：mm（inch）
A
B
T
8.0±0.3
(0.315±0.012)
Sprocket hole
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
T1
2.0±0.05
(0.079±0.002)
F
4.0±0.1
(0.157±0.004)
Chip Cavity
Type(EIA)
Ａ
0.37
Insertion Pitch
Ｆ
Ｂ
0.67
□MK063(0201)
□WK105(0204) ※
0.65
1.15
□MK105(0402) （*1 C）
□MK105(0402) （*1 P）
Note *1 Thickness, C：0.2mm ,P：0.3mm. ※ LW Reverse type.
2.0±0.05
●Punched carrier tape （2mm pitch）
0.45max.
0.42max.
0.4max.
0.45max.
0.3max.
0.42max.
Unit：mm
T
8.0±0.3
(0.315±0.012)
B
2.0±0.05
(0.079±0.002)
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
A
F
T1
Unit：mm（inch）
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
Sprocket hole
Tape Thickness
Ｔ
4.0±0.1
(0.157±0.004)
Ａ
Chip Cavity
Ｂ
Insertion Pitch
Ｆ
Tape Thickness
Ｔ
0.65
1.15
2.0±0.05
0.8max.
Type(EIA)
□MK105 (0402)
□VK105 (0402)
Unit：mm
●Punched carrier tape （4mm pitch）
B
T
8.0±0.3
(0.315±0.012)
A
F
Unit：mm（inch）
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
Sprocket hole
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
4.0±0.1
(0.157±0.004)
2.0±0.1
(0.079±0.004)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E05R01
Chip Cavity
Type(EIA)
Ａ
Insertion Pitch
Ｆ
Ｂ
□MK107(0603)
□WK107(0306) ※
1.0
1.8
□MR107(0603)
4.0±0.1
□MK212(0805)
1.65
2.4
□WK212(0508) ※
□MK316(1206)
2.0
3.6
Note：Taping size might be different depending on the size of the product. ※ LW Reverse type.
●Embossed tape（4mm wide）
Unit：mm
4.0±0.05
(0.157±0.002)
B
1.0±0.02
(0.039±0.001)
1.1max.
0.9±0.05
(0.035±0.002)
1.8±0.02
(0.071±0.001)
A
F
1.1max.
Unit：mm（inch）
φ0.8±0.04
(φ0.031±0.002)
Sprocket hole
Tape Thickness
Ｔ
2.0±0.04
(0.079±0.002)
Chip Cavity
Type(EIA)
□MK021(008004)
□MK042(01005)
□VS042(01005)
Ａ
0.135
Ｂ
0.27
0.23
0.43
Insertion Pitch
Ｆ
K
Tape Thickness
T
1.0±0.02
0.5max.
0.25max.
Unit：mm
●Embossed tape（8mm wide）
Unit：mm（inch）
3.5±0.05
(0.138±0.002)
Sprocket hole
A
B
F
1.75±0.1
(0.069±0.004）
8.0±0.3
(0.315±0.012)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
4.0±0.1
(0.157±0.004)
2.0±0.1
(0.079±0.004)
Type(EIA)
□MK105(0402)
□WK107(0306) ※
□MK212(0805)
□MR212(0805)
□MK316(1206)
□MR316(1206)
□MK325(1210)
□MR325(1210)
Note： ※ LW Reverse type.
Chip Cavity
Ａ
0.6
1.0
Ｂ
1.1
1.8
1.65
2.4
2.0
3.6
2.8
3.6
Insertion Pitch
Ｆ
2.0±0.1
4.0±0.1
Tape Thickness
K
0.6max
1.3max.
T
0.2±0.1
0.25±0.1
3.4max.
0.6max.
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E05R01
●Embossed tape（12mm wide）
Unit：mm（inch）
5.5±0.05
(0.217±0.002)
Sprocket hole
A
B
4.0±0.1
(0.157±0.004)
12.0±0.3
(0.472±0.012)
1.75±0.1
(0.069±0.004）
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
2.0±0.1
(0.079±0.004)
F
Chip Cavity
Type(EIA)
Ａ
3.1
3.7
□MK325(1210)
□MK432(1812)
Insertion Pitch
Ｆ
8.0±0.1
8.0±0.1
Ｂ
4.0
4.9
Tape Thickness
K
4.0max.
4.0max.
T
0.6max.
0.6max.
Unit：mm
④Trailer and Leader
Blank portion
Chip cavity
Blank portion
Leader
100mm or more
(3.94inches or more)
160mm or more
(6.3inches or more)
Direction of tape feed
400mm or more
(15.7inches or more)
⑤Reel size
t
E
C
R
B
A
D
W
A
φ178±2.0
B
φ50min.
C
φ13.0±0.2
D
φ21.0±0.8
4mm wide tape
8mm wide tape
12mm wide tape
T
1.5max.
2.5max.
2.5max.
W
5±1.0
10±1.5
14±1.5
Unit：mm
E
2.0±0.5
R
1.0
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
Pull direction
0～20°
Top tape
Base tape
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E05R01
Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
■RELIABILITY DATA
1.Operating Temperature Range
Temperature
Compensating（Class1）
Standard
High Frequency Type
－55 to ＋125℃
B7
C6
C7
Specification
B
X5R
X7R
X6S
X7S
Temperature Range
－25 to ＋85℃
－55 to ＋85℃
－55 to ＋125℃
－55 to ＋105℃
－55 to ＋125℃
LD(※)
X5R
－55 to ＋85℃
BJ
Specified
Value
High Permittivity （Class2）
Note: ※LD Low distortion high value multilayer ceramic capacitor
2. Storage Conditions
Temperature
Compensating（Class1）
Standard
High Frequency Type
－55 to ＋125℃
Specification
Temperature Range
B
－25 to ＋85℃
BJ
X5R
－55 to ＋85℃
B7
X7R
－55 to ＋125℃
C6
X6S
－55 to ＋105℃
C7
X7S
－55 to ＋125℃
LD(※)
X5R
－55 to ＋85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
Specified
Value
High Permittivity （Class2）
3. Rated Voltage
Specified
Value
Temperature
Compensating（Class1）
Standard
50VDC, 25VDC, 16VDC
High Frequency Type
50VDC, 25VDC, 16VDC
High Permittivity （Class2）
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC
4. Withstanding Voltage （Between terminals）
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
No breakdown or damage
High Permittivity （Class2）
Test
Methods and
Remarks
Class 1
Rated voltage×3
Applied voltage
Duration
Charge/discharge current
Class 2
Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2） Note 1
Test
Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
10000 MΩmin.
C≦0.047μF : 10000 MΩ min.
C＞0.047μF : 500MΩ・μF
: Rated voltage
: 60±5 sec.
: 50mA max.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E05R01
6. Capacitance （Tolerance）
Specified
Value
Standard
C□
U□
SL
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C＞10pF
: ±0.25pF
: ±0.5pF
: ±5% or ±10%
High Frequency Type
CG
0.2pF≦C≦2pF
C＞2pF
: ±0.1pF
: ±5%
Temperature
Compensating（Class1）
High Permittivity （Class2）
Test
Methods and
Remarks
±10% or ±20%
Standard
Preconditioning
Measuring frequency
Measuring voltage Nte
Bias application
Class 1
High Frequency Type
None
1ＭHz±10%
0.5 to 5Vrms
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1kHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating（Class1）
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000
（C：Nominal capacitance）
Standard
High Frequency Type
High Permittivity （Class2） Note 1
Refer to detailed specification
BJ, B7, C6, C7：2.5% max.
Class 1
High Frequency Type
None
1ＭHz±10%
1GHz
0.5 to 5Vrms
Standard
Test
Methods and
Remarks
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment
Measuring jig
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1ｋHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
: HP4291A
: HP16192A
8. Temperature Characteristic （Without voltage application）
Temperature Characteristic ［ppm/℃］
C□ : 0
CG
Standard
Temperature
Compensating（Class1）
U□ : －750
SL
High Frequency Type
UJ, UK
: ＋350 to －1000
Temperature Characteristic ［ppm/℃］
C□ : 0
CG
Specified
Value
Tolerance ［ppm/℃］
G : ±30
J：±120
K：±250
Tolerance ［ppm/℃］
G : ±30
Capacitance
Reference
Temperature Range
change
temperature
±10%
20℃
－25 to ＋85℃
±15%
25℃
－55 to ＋85℃
±15%
25℃
－55 to ＋125℃
±22%
25℃
－55 to ＋105℃
±22%
25℃
－55 to ＋125℃
±15%
25℃
－55 to ＋85℃
distortion high value multilayer ceramic capacitor
Specification
B
X5R
B7
X7R
C6
XS
C7
X7S
LD(※)
X5R
Note : ※LD Low
BJ
High Permittivity （Class2）
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
（C85－C20）
×106（ppm/℃）
△T＝65
C20×△T
Test
Methods and
Remarks
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B
X5R、X7R、X6S、X7S
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
（C－C2）
C2
×100（%）
C ：Capacitance in Step 1 or Step 3
C2 ：Capacitance in Step 2
9. Deflection
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E05R01
Specified
Value
Temperature
Compensating（Class1）
Standard
Appearance
Capacitance change
: No abnormality
: Within ±5% or ±0.5 pF, whichever is larger.
High Frequency Type
Appearance
Capacitance change
: No abnormality
: Within±0.5 pF
Appearance
Capacitance change
: No abnormality
: Within ±12.5%
High Permittivity （Class2）
Board
Thickness
Warp
Duration
Test
Methods and
Remarks
Multilayer Ceramic Capacitors
021, 042, 063, ※105 Type
The other types
Glass epoxy-resin substrate
0.8mm
1.6mm
1mm
10 sec.
※
105 Type thickness, C： 0.2mm ,P： 0.3mm.
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Specified
Value
Standard
Temperature
Compensating（Class1）
High Frequency Type
High Permittivity （Class2）
Test
Methods and
Remarks
－
No mechanical damage.
－
High Frequency Type
Applied force
: 5N
Duraton
: 10 sec.
11. Adhesive Strength of Terminal Electrodes
Specified
Value
Standard
Temperature
Compensating（Class1）
High Frequency Type
No terminal separation or its indication.
High Permittivity （Class2）
Test
Methods and
Remarks
Applied force
Duration
Multilayer Ceramic Capacitors
021, 042, 063 Type
105 Type or more
2N
5N
30±5 sec.
12. Solderability
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
At least 95% of terminal electrode is covered by new solder.
High Permittivity （Class2）
Test
Methods and
Remarks
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5℃
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E05R01
13. Resistance to Soldering
Standard
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5%
: Initial value
: Initial value
（between terminals） : No abnormality
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±7.5%
: Initial value
: Initial value
（between terminals）: No abnormality
Temperature
Compensating（Class1）
Specified
Value
High Permittivity （Class2）
Note 1
Class 1
021, 042, 063 Type
105 Type
Preconditioning
Preheating
Test
Methods and
Remarks
None
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
150℃, 1 to 2 min.
Solder temp.
Duration
Recovery
270±5℃
3±0.5 sec.
6 to 24 hrs （Standard condition） Note 5
021, 042、063 Type
Preconditioning
Preheating
150℃, 1 to 2 min.
Solder temp.
Duration
Recovery
Class 2
105, 107, 212 Type
316, 325, 432 Type
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min.
150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs （Standard condition） Note 5
14. Temperature Cycle (Thermal Shock）
Standard
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±0.25pF
: Initial value
: Initial value
（between terminals） : No abnormality
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±7.5%
: Initial value
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Specified
Value
High Permittivity （Class2）
Note 1
Class 1
Preconditioning
Test
Methods and
Remarks
1 cycle
Number of cycles
Recovery
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
None
Step
1
2
3
4
Temperature（℃）
Minimum operating temperature
Normal temperature
Maximum operating temperature
Normal temperature
Time（min.）
30±3
2 to 3
30±3
2 to 3
5 times
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E05R01
15. Humidity （Steady State）
Appearance
Capacitance change
Q
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
High Permittivity （Class2）
Note 1
Insulation resistance
: No abnormality
: Within ±5% or ±0.5pF, whichever is larger.
: C＜10pF : Q≧200＋10C
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩmin.
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±0.5pF,
: 1000 MΩmin.
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
Class 1
Standard
Test
Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
No abnormality
Within ±12.5%
5.0% max.
50 MΩμF or 1000 MΩwhichever is smaller.
Class 2
All items
Thermal treatment（ at 150℃ for 1 hr） Note 2
40±2℃
90 to 95%RH
500＋24/－0 hrs
24±2 hrs （Standard condition） Note 5
High Frequency Type
None
40±2℃
60±2℃
90 to 95%RH
500＋24/－0 hrs
6 to 24 hrs （Standard condition） Note 5
16. Humidity Loading
Appearance
Capacitance change
Q
Standard
Insulation resistance
Temperature
Compensating（Class1）
Specified
Value
Appearance
Capacitance change
Note 1
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
90 to 95%RH
500＋24/－0 hrs
Rated voltage
50mA max.
50mA max.
6 to 24 hrs （Standard condition） Note 5
24±2 hrs（Standard condition） Note 5
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge
current
Recovery
Class 1
High Frequency Type
No abnormality
Within ±12.5%
5.0% max.
25 MΩμF or 500 MΩ, whichever is smaller.
Class 2
All items
Voltage treatment
（Rated voltage are applied for 1 hour at 40℃） Note 3
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
Standard
Test
Methods and
Remarks
Insulation resistance
: No abnormality
: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
: 500 MΩmin.
High Frequency Type
High Permittivity （Class2）
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger.
: C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩmin.
None
40±2℃
60±2℃
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E05R01
17. High Temperature Loading
Appearance
Capacitance change
Q
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
High Permittivity （Class2）
Note 1
Test
Methods and
Remarks
Temperature
Duration
Applied voltage
Charge/discharge
current
Recovery
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±3% or ±0.3pF, whichever is larger.
: 1000 MΩmin.
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
Class 1
High Frequency Type
No abnormality
Within ±12.5%
5.0% max.
50 MΩμF or 1000 MΩ, whichever is smaller.
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2 Note 4
Class 2
BJ, LD(※)
C6
B7, C7
Voltage treatment（Twice the rated voltage shall be applied for
1 hour at 85℃, 105℃ or 125℃） Note 3, 4
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2 Note 4
50mA max.
50mA max.
6 to 24hr （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
Standard
Preconditioning
Insulation resistance
: No abnormality
: Within ±3% or ±0.3pF, whichever is larger.
: C＜10pF： Q≧200＋10C
10≦C＜30pF：Q≧275＋2.5C
C≧30pF： Q≧350（C：Nominal capacitance）
: 1000 MΩmin.
None
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for
24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning
measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the
"standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E05R01
Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
－55 to ＋125℃
2. Storage Temperature Range
Specified Value
－55 to ＋125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
4. Dielectric Withstanding Voltage （Between terminals）
Specified Value
No breakdown or damage
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage×3
: 1 to 5 sec.
: 50mA max.
５．Insulation Resistance
Specified Value
10000 MΩor 500MΩμF, whichever is smaller
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage
: 60±5 sec.
: 50mA max.
6．Capacitance （Tolerance）
Specified Value
±10％
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
７．Dissipation Factor
Specified Value
0.1%max
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Appearance
Capacitance change
: No abnormality
: ±5%
8．Bending Strength
Specified Value
Test Methods and
Remarks
Warp
Speed
Duration
Test board
Thickness
:
:
:
:
:
1mm
0.5mm/second
10 seconds
glass epoxy resin substrate
1.6mm
Capacitance measurement shall be conducted with the board bent.
9．Adhesive Force of Terminal Electrodes
Specified Value
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
Applied force
Duration
: 5N
: 30 ±5 seconds
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E05R01
10．Solderability
Specified Value
Test Methods and
Remarks
At least 95% of terminal electrode is covered by new solder.
Eutectic solder
H60A or H63A
230±5℃
Solder type
Solder temperature
Duration
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
11．Resistance to Soldering Heat
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: ±2.5% max.
: Initial value
: Initial value
（between terminals） : No abnormality
Solder temp.
Duration
Preheating conditions
Measurement shall be conducted
: 270 ±5℃
: 3 ±0.5 sec.
: 80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
: 24±2hrs under the standard condition Note1
12．Temperature Cycle （Thermal Shock）
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: ±2.5% max
: Initial value
: Initial value
（between terminals）: No abnormality
Conditions for 1 cycle
Step
temperature（℃）
1
Minimum operating temperature
2
Normal temperature
3
Maximum operating temperature
4
Normal temperature
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition
Time（min.）
30±3 min.
2 to 3 min.
30±3 min.
2 to 3 min.
Note1
13．Humidity （Steady state）
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±5% max
0.5% max
50MΩμF or 1000MΩ, whichever is smaller
Test Methods and
Remarks
Temperature
Humidity
Duration
Measurement shall be conducted
:
:
:
:
40±2℃
90 to 95% RH
500 ＋24/－0 hrs
24 ±2hrs under the standard condition
Note1
14．Humidity Loading
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±7.5% max
0.5% max
25MΩμF or 500MΩ, whichever is smaller
According to JIS C 5101-1.
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Measurement shall be conducted
: 40±2℃
: 90 to 95% RH
: 500 ＋24/－0 hrs
: Rated voltage
: 50mA max
: 24 ±2hrs under the standard condition
Note1
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E05R01
15．High Temperature Loading
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±3% max
0.35% max
50MΩμF or 1000MΩ, whichever is smaller
According to JIS C 5101-1.
Temperature
Duration
Applied voltage
Charge/discharge current
Measurement shall be conducted
:
:
:
:
:
Maximum operating temperature
1000 ＋48/－0 hrs
Rated voltage x 2
50mA max
24 ±2hrs under the standard condition
Note1
Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E05R01
Multilayer Ceramic Capacitors , Super Low Distortion Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Medium-High Voltage Multilayer Ceramic Capacitor
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
Temperature Compensating（Class1）
CG
: －55 to ＋125℃
High Permittivity （Class2）
X7R, X7S
X5R
B
SD
:
:
:
:
Temperature Compensating（Class1）
CG
: －55 to ＋125℃
High Permittivity （Class2）
X7R, X7S
X5R
B
SD
:
:
:
:
Temperature Compensating（Class1）
100VDC(HMK)
High Permittivity （Class2）
100VDC(HMK), 250VDC(QMK), 630VDC(SMK)
－55
－55
－25
－55
to
to
to
to
＋125℃
＋85℃
＋85℃
＋125℃
2. Storage Temperature Range
Specified Value
－55
－55
－25
－55
to
to
to
to
＋125℃
＋85℃
＋85℃
＋125℃
3. Rated Voltage
Specified Value
4. Withstanding Voltage（Between terminals）
Specified Value
No breakdown or damage
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage×2.5（HMK）, Rated voltage×2（QMK）, Rated voltage×1.2（SMK）
: 1 to 5sec.
: 50mA max.
5. Insulation Resistance
Specified Value
Test Methods and
Remarks
Temperature Compensating（Class1）
10000 MΩmin.
High Permittivity （Class2）
100MΩ・μF or 10GΩ, whichever is smaller.
Applied voltage
Duration
Charge/discharge current
: Rated voltage（HMK, QMK）, 500V（SMK）
: 60±5sec.
: 50mA max.
6. Capacitance （Tolerance）
Specified Value
Temperature Compensating（Class1）
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C＞10pF
： ±0.25pF
： ±0.5pF
： ±5% or ±10%
High Permittivity （Class2）
±10%, ±20%
Temperature Compensating（Class1）
Measuring frequency
Measuring voltage
Bias application
: 1MHz±10%
: 0.5～5Vrms
: None
High Permittivity （Class2）
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
7. Q or Dissipation Factor
Specified Value
Temperature Compensating（Class1）
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000
（C：Nominal capacitance）
High Permittivity （Class2）
3.5%max（HMK）,2.5%max（QMK, SMK）
Temperature Compensating（Class1）
Measuring frequency
Measuring voltage
Bias application
: 1MHz±10%
: 0.5～5Vrms
: None
High Permittivity （Class2）
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E05R01
8. Temperature Characteristic of Capacitance
Specified Value
Test Methods and
Remarks
Temperature Compensating（Class1）
CG
：0±30ppm/℃(－55 to ＋125℃)
High Permittivity （Class2）
B
X5R
X7R
X7S
SD
:
:
:
:
:
±10%（－25
±15%（－55
±15%（－55
±22%（－55
- （－55
to
to
to
to
to
＋85℃）
＋85℃）
＋125℃
＋125℃）
＋125℃）
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
Step
CG、
B、X5R、X7R、X7S、SD
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
（C－C2）
×100（%）
C2
C : Capacitance value in Step 1 or Step 3
C2 : Capacitance value in Step 2
9. Deflection
Temperature Compensating（Class1）
Appearance
Capacitance change
High Permittivity （Class2）
Appearance
Capacitance change
Specified Value
Test Methods and
Remarks
Warp
Duration
Test board
Thickness
:
:
:
:
: No abnormality
: Within ±5% or ±0.5 pF, whichever is larger.
: No abnormality
: Within±10%
1mm
10sec.
Glass epoxy-resin substrate
1.6mm
Capacitance measurement shall be conducted with the board bent.
10. Adhesive Strength of Terminal Electrodes
Specified Value
Temperature Compensating（Class1）
High Permittivity （Class2）
Applied force
Duration
No terminal separation or its indication.
: 5N
: 30±5sec.
Test Methods and
Remarks
11. Solderability
Specified Value
Test Methods and
Remarks
Temperature Compensating（Class1）
High Permittivity （Class2）
Solder type
Solder temperature
Duration
At least 95% of terminal electrode is covered by new solder
Eutectic solder
H60A or H63A
230±5℃
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
12. Resistance to Soldering
Temperature Compensating（Class1）
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.(HMK)
: Initial value
: Initial value
（between terminals） : No abnormality
High Permittivity （Class2）
Appearance
Capacitance change
Dissipation facto
Insulation resistance
Withstanding voltage
: No abnormality
: Within±15%（HMK）, ±10%（QMK, SMK）
: Initial value
: Initial value
（between terminals） : No abnormality
Specified Value
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E05R01
Preconditioning
Solder temperature
Duration
Preheating conditions
Test Methods and
Remarks
Recovery
Preconditioning
Solder temperature
Duration
Preheating conditions
Recovery
Temperature Compensating（Class1）
None
270±5℃
3±0.5sec.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
24±2hrs under the standard condition Note3
High Permittivity （Class2）
Thermal treatment（at 150℃ for 1hr） Note1
270±5℃
3±0.5sec.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
24±2hrs under the standard condition Note3
13. Temperature Cycle （Thermal Shock）
Temperature Compensating（Class1）
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.(HMK)
: Initial value
: Initial value
（between terminals） : No abnormality
High Permittivity （Class2）
Appearance
Capacitance change
Dissipation facto
Insulation resistance
Withstanding voltage
: No abnormality
: Within±15%（HMK）, ±10%（QMK, SMK）
: Initial value
: Initial value
（between terminals） : No abnormality
Specified Value
Class 1
Preconditioning
Test Methods and
Remarks
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 1
None
Step
1
2
3
4
1 cycle
Number of cycles
Recovery
Temperature（℃）
Minimum operating temperature
Normal temperature
Maximum operating temperature
Normal temperature
Time（min.）
30±3
2 to 3
30±3
2 to 3
5 times
6 to 24 hrs （Standard condition） Note 3
24±2 hrs （Standard condition） Note 3
14. Humidity （Steady state）
Temperature Compensating（Class1）
Specified Value
High Permittivity （Class2）
Test Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
Appearance
Capacitance change
Q
Insulation resistance
: No abnormality
: Within ±5% or ±0.5pF, whichever is larger.(HMK)
: C＜10pF : Q≧200＋10C
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩmin.
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 25MΩμF or 1000MΩ, whichever is smaller.
Class 1
None
40±2℃
90 to 95%RH
500＋24/－0 hrs
6 to 24 hrs （Standard condition） Note 3
Class 2
Thermal treatment（ at 150℃ for 1 hr） Note 1
40±2℃
90 to 95%RH
500＋24/－0 hrs
24±2 hrs （Standard condition） Note 3
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E05R01
15. Humidity Loading
Appearance
Capacitance change
Q
Temperature Compensating（Class1）
Specified Value
High Permittivity （Class2）
Insulation resistance
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger (HMK).
: C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩmin.
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 10MΩμF or 500MΩ, whichever is smaller.
According to JIS 5101-1.
Class 1
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
Class 2
Voltage treatment
（Rated voltage are applied for 1 hour at 40℃） Note 2
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
50mA max.
50mA max.
6 to 24 hrs （Standard condition） Note 3
24±2 hrs（Standard condition） Note 3
Preconditioning
Test Methods and
Remarks
None
Temperature
Humidity
Duration
Applied voltage
Charge/discharge
current
Recovery
16. High Temperature Loading
Appearance
Capacitance change
Q
Temperature Compensating（Class1）
Specified Value
High Permittivity （Class2）
Insulation resistance
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger.(HMK)
: C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩmin.
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 50MΩμF or 1000MΩ, whichever is smaller.
According to JIS 5101-1.
Test Methods and
Remarks
Preconditioning
Temperature
Duration
Class 1
None
Maximum operating temperature
1000＋48/－0 hrs
Applied voltage
Rated voltage×2(HMK)
Charge/discharge
current
Recovery
Class 2
Voltage treatment Note 2
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2(HMK), Rated voltage×1.5（QMK）,
Rated voltage×1.2（SMK）
50mA max.
50mA max.
6 to 24hr （Standard condition） Note 3
24±2 hrs （Standard condition） Note 3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at
room temperature
for 24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the
test conditions, and kept at room temperature for 24±2hours.
Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under
the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E05R01
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Precautions on the use of Multilayer Ceramic Capacitors
■PRECAUTIONS
1. Circuit Design
Precautions
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
Precautions
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations （Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations （Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）Recommended land dimensions for typical chip capacitors
Land patterns for PCBs
●Multilayer Ceramic Capacitors : Recommended land dimensions
Land pattern
（unit: mm）
Solder-resist
Wave-soldering
Chip capacitor
Type
107
212
316
325
L
1.6
2.0
3.2
3.2
C
Size
W
0.8
1.25
1.6
2.5
A
0.8 to 1.0
1.0 to 1.4
1.8 to 2.5
1.8 to 2.5
B
0.5 to 0.8
0.8 to 1.5
0.8 to 1.7
0.8 to 1.7
B
A
B
C
0.6 to 0.8
0.9 to 1.2
1.2 to 1.6
1.8 to 2.5
Chip capacitor
W
Technical
considerations
L
Reflow-soldering
Type
021
L
0.25
Size
W
0.125
A
0.095～0.135
B
0.085～0.125
C
0.110～0.150
Note：Recommended land
042
0.4
0.2
0.15～0.25
0.15～0.20
0.15～0.30
size might be
063
105
107
212
316
0.6
1.0
1.6
2.0
3.2
0.3
0.5
0.8
1.25
1.6
0.20～0.30 0.45～0.55
0.8～1.0
0.8～1.2
1.8～2.5
0.20～0.30 0.40～0.50
0.6～0.8
0.8～1.2
1.0～1.5
0.25～0.40 0.45～0.55
0.6～0.8
0.9～1.6
1.2～2.0
different according to the allowance of the size of the product.
●LWDC: Recommended land dimensions
（unit: mm）
Type
105
107
L
0.52
0.8
Size
W
1.0
1.6
A
0.18～0.22
0.25～0.3
B
0.2～0.25
0.3～0.4
C
0.9～1.1
1.5～1.7
for reflow-soldering
212
1.25
2.0
0.5～0.7
0.4～0.5
1.9～2.1
325
3.2
2.5
1.8～2.5
1.0～1.5
1.8～3.2
432
4.5
3.2
2.5～3.5
1.5～1.8
2.3～3.5
LWDC
W
L
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E05R01
（2）Examples of good and bad solder application
Item
Not recommended
Lead wire of component
Recommended
Solder-resist
Mixed mounting of SMD and
leaded components
Chassis
Solder (for grounding)
Solder-resist
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Hand-soldering of leaded
components near mounted
components
Solder-resist
Solder-resist
Horizontal component
placement
◆Pattern configurations （Capacitor layout on PCBs）
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any
stresses from board warp or deflection.
Items
Not recommended
Recommended
possible mechanical
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
Deflection of board
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
E
D
Perforation
C
A
B
Slit
Magnitude of stress
A＞B＝C＞D＞E
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E05R01
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid
this, the following points shall be considerable.
（1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
（2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
（3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be
used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle
placement:
Item
Improper method
Proper method
Single-sided mounting
chipping
or cracking
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
Technical
considerations
supporting pins
or back-up pins
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical
impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of
the pin shall be conducted periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in
stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect
components. Therefore, the following precautions shall be noted in the application of adhesives.
（1）Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f. The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
（2）The recommended amount of adhesives is as follows;
After capacitor are bonded
Amount adhesive
［Recommended condition］
a
a
Figure
212/316 case sizes as examples
a
0.3mm min
b
b
100 to 120μm
c
Adhesives shall not contact land
c
c
4. Soldering
Precautions
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
（1）Flux used shall be less than or equal to 0.1 wt%（ in Cl equivalent） of halogenated content. Flux having a strong acidity content shall
not be applied.
（2）When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
（3）When water-soluble flux is used, special care shall be taken to properly clean the boards.
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
Technical
considerations
◆Selection of Flux
1-1. When too much halogenated substance（Chlorine, etc.） content is used to activate flux, or highly acidic flux is used, it may lead to
corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted
and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high
humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning
methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E05R01
◆Soldering
･ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
･ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
･ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within
130℃.
･ Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
［Reflow soldering］
【Recommended conditions for eutectic
soldering】
【Recommended condition for Pb-free
soldering】
300
300
200
Peak
260℃ Max.
Within 10sec.
230℃
Within 10sec.
60sec. 60sec
Min.
Min.
Slow cooling
100
Temperature（℃）
Temperature（℃）
Preheating
0
200
Slow
cooling
100
0
Preheating150℃ Heating above
230℃
60sec. Min.
40sec. Max.
1/2T～1/3T
Capacitor
Caution
①The ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the
thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall
be kept as close to recommended times as possible. soldering for 2 times.
［Wave soldering］
【Recommended conditions for eutectic
soldering】
300
100
Temperature（℃）
Temperature（℃）
Slow cooling
PC board
Peak
260℃ Max.
Within 10sec.
230～250℃
Within 3sec.
200
T
【Recommended condition for Pb-free
soldering】
300
Preheating
120sec. Min.
Solder
200
120sec. Min.
Preheating
150℃
100
Slow
cooling
0
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only. soldering for 1 times.
【Recommended condition for Pb-free
soldering】
400
400
300
200
Slow cooling
100
0
Preheating
60sec. Min.
Temperature（℃）
Temperature（℃）
300
⊿T
Slow cooling
200
Preheating
150℃ Min.
100
0
400
Peak
350℃ Max.
Within 3sec.
230～280℃
Within 3sec.
316type or less
200
0
Slow cooling
⊿T
Preheating
150℃ Min.
100
60sec. Min.
⊿T
⊿T≦150℃
Peak
280℃ Max.
Within 3sec.
300
温度（℃）
［Hand soldering］
【Recommended conditions for eutectic
soldering】
60sec. Min.
325type or more
⊿T
⊿T≦130℃
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors. soldering for 1 times.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E05R01
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use
of the cleaning. （e.g. to remove soldering flux or other materials from the production process.）
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect
capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate
their outer coating, resulting in a degradation of the capacitor's electrical properties （especially insulation resistance）.
2. Inappropriate cleaning conditions（ insufficient or excessive cleaning） may adversely affect the performance of the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of
capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully
checked;
Ultrasonic output :
20 W/ℓ or les
Ultrasonic frequency :
40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
Precautions
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while
left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat
may lead to damage or destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
Precautions
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
（1）If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
（2）Please be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature : Below 30℃
Humidity : Below 70% RH
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as
time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so care shall be taken to
design circuits. Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for
1hour.
Technical
considerations
If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and
quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the
above period, please check solderability before using the capacitors.
※RCR-2335B（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E05R01
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Taiyo Yuden:
LMK042B7101KC-FW LMK042B7101MC-FW LMK042B7102KC-FW LMK042B7102MC-FW LMK042B7151KC-FW
LMK042B7151MC-FW LMK042B7221KC-FW LMK042B7221MC-FW LMK042B7331KC-FW LMK042B7331MC-FW
LMK042B7471KC-FW LMK042B7471MC-FW LMK042B7681KC-FW LMK042B7681MC-FW LMK042BJ101KC-FW
LMK042BJ102KC-FW LMK042BJ103KC-FW LMK042BJ103MC-FW LMK042BJ221KC-FW LMK042BJ471KC-FW
LMK063BJ103KP-F LMK063BJ103MP-F LMK063BJ104KP-F LMK063BJ104MP-F LMK063BJ152KP-F
LMK063BJ222KP-F LMK063BJ222MP-F LMK063BJ223KP-F LMK063BJ223MP-F LMK063BJ224MP-F
LMK063BJ472KP-F LMK063BJ472MP-F LMK063BJ473KP-F LMK063C6273KP-F LMK063C6273MP-F
LMK063C6473MP-F LMK105B7104KV-F LMK105B7223KV-F LMK105B7333KV-F LMK105B7473KV-F
LMK105BJ104KC-F LMK105BJ104KV-F LMK105BJ104MV-F LMK105BJ105KV-F LMK105BJ105MV-F
LMK105BJ224KV-F LMK105BJ225MV-F LMK105BJ474KV-F LMK105BJ683KV-F LMK105BJ683MV-F
LMK105BJ823MV-F LMK105F223ZV-F LMK105F224ZV-F LMK105F473ZV-F LMK105SD332JV-F
LMK105SD332KV-F LMK105SD392JV-F LMK105SD392KV-F LMK105SD472JV-F LMK105SD472KV-F
LMK107B7105KA-T LMK107B7105MA-T LMK107B7154KA-T LMK107B7154MA-T LMK107B7224KA-T
LMK107B7224MA-T LMK107B7225KA-T LMK107B7334KA-T LMK107B7334MA-T LMK107B7474KA-T
LMK107B7474MA-T LMK107BJ105KA-T LMK107BJ105KK-T LMK107BJ105MA-T LMK107BJ105MK-T
LMK107BJ106MALTD LMK107BJ225KA-T LMK107BJ225MA-T LMK107BJ335KA-T LMK107BJ475KA-T
LMK107BJ684KA-T LMK107BJ684MA-T LMK107F105ZA-T LMK107F225ZA-T LMK107SD123JA-T
LMK107SD123KA-T LMK107SD153JA-T LMK107SD153KA-T LMK107SD183JA-T LMK107SD183KA-T
LMK107SD223JA-T LMK107SD223KA-T LMK212B7105KD-T LMK212B7105KG-T LMK212B7105MD-T
LMK212B7105MG-T LMK212B7106KG-TD LMK212B7225KD-T LMK212B7225KG-T LMK212B7225MD-T
工商网监
湘ICP备2023018690号
