Notice for TAIYO YUDEN Products
[ For High Quality and/or Reliability Equipment
(Automotive Electronic Equipment / Industrial Equipment) ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■ Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■ Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■ The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDRF, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■ Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■ Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■ The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter“TAIYO YUDEN’
s official sales channel”). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’
s official sales
channel.
■ Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to“U.S. Export
Administration Regulations”
,“Foreign Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
19
Automotive Application Guide
We classify automotive electronic equipment into the following four application categories and set usable
application categories for each of our products. When using our products for automotive electronic
equipment, please be sure to check such application categories and use our products accordingly. Should
you have any questions on this matter, please contact us.
Category
SAFETY
・ABS (Anti-Lock Brake System)
・ESC (Electronic Stability Control)
・Airbag
・ADAS (Equipment that directly controls running, turning and stopping), etc.
BODY & CHASSIS
・Wiper
・Automatic Door
・Power Window
・Keyless Entry System
・Electric Door Mirror
・Interior Lighting
・LED Headlight
・TPMS (Tire Pressure Monitoring System)
・Anti-Theft Device (Immobilizer), etc.
INFOTAINMENT
・Car Infotainment System
・ITS/Telematics System
・Instrument Cluster
・ADAS (Sensor, Equipment that is not interlocked with safety equipment or powertrain), etc.
Automotive Application Guide
POWERTRAIN
Automotive Electronic Equipment (Typical Example)
・Engine ECU (Electronically Controlled Fuel Injector)
・Cruise Control Unit
・4WS (4 Wheel Steering)
・Automatic Transmission
・Power Steering
・HEV/PHV/EV Core Control (Battery, Inverter, DC-DC)
・Automotive Locator (Car location information providing device), etc.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
15
MULTILAYER
CERAMIC
CAPACITORS
MULTILAYER CERAMIC
CAPACITORS
REFLOW
REFLOW
AEC-Q200
AECQ200
■PART NUMBER
J M K
① ② ③
3
1 6
④
CERAMIC CAPACITORS
①Rated voltage
Code
A
J
L
E
T
G
U
H
Q
S
②Series name
Code
M
V
W
△
⑤
B
J
1
⑥
0 6
⑦
M L H T △
⑧ ⑨ ⑩ ⑪ ⑫
③End termination
Code
End termination
K
Plated
J
Soft Termination
S
Cu Internal Electrodes (For High Frequency)
F
High Reliability Application
Rated voltage［VDC］
4
6.3
10
16
25
35
50
100
250
630
④Dimension（L×W）
Dimensions
（L×W）［mm］
063
0.6 × 0.3
1.0 × 0.5
105
0.52× 1.0 ※
1.6 × 0.8
107
0.8 × 1.6 ※
2.0 × 1.25
212
1.25× 2.0 ※
316
3.2 × 1.6
325
3.2 × 2.5
432
4.5 × 3.2
Note : ※LW reverse type（□WK） only
Type
Series name
Multilayer ceramic capacitor
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
⑤Dimension tolerance
Code
Type
△
ALL
063
105
107
A
212
L［mm］
Standard
W［mm］
Standard
0.6±0.05
1.0±0.10
1.6＋0.15/－0.05
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
2.0＋0.15/－0.05
1.25＋0.15/－0.05
316
325
105
107
3.2±0.20
3.2±0.30
1.0＋0.15/－0.05
1.6＋0.20/－0
1.6±0.20
2.5±0.30
0.5＋0.15/－0.05
0.8＋0.20/－0
212
2.0＋0.20/－0
1.25＋0.20/－0
C
316
105
107
212
212
3.2±0.30
1.0＋0.20/－0
1.6＋0.25/－0
2.0＋0.25/－0
2.0±0.15
1.6±0.30
0.5＋0.20/－0
0.8＋0.25/－0
1.25＋0.25/－0
1.25±0.15
K
316
3.2±0.20
1.6±0.20
B
325
EIA（inch）
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
T［mm］
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
0.85±0.10
1.25＋0.15/－0.05
1.6±0.20
2.5±0.30
0.5＋0.15/－0.05
0.8＋0.20/－0
0.85±0.10
1.25＋0.20/－0
1.6±0.30
0.5＋0.20/－0
0.8＋0.25/－0
1.25＋0.25/－0
0.85±0.15
1.15±0.20
1.6±0.20
2.5±0.30
3.2±0.50
2.5±0.30
Note: ｃｆ. STANDARD EXTERNAL DIMENSIONS
⑥Temperature characteristics code
■High dielectric type
Applicable
Temperature
Code
standard
range［℃］
△＝Blank space
△= Blank space
Ref. Temp.［℃］
Capacitance change
BJ
EIA
X5R
－55～＋ 85
25
±15％
C6
EIA
X6S
－55～＋105
25
±22％
B7
EIA
X7R
－55～＋125
25
±15％
C7
EIA
X7S
－55～＋125
25
±22％
D7
EIA
X7T
－55～＋125
25
＋22％/－33％
Capacitance
tolerance
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
Tolerance
code
K
M
K
M
K
M
K
M
K
M
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
18
19
■Temperature compensating type
Applicable
Code
standard
JIS
Temperature
range［℃］
CG
CG
Ref. Temp.［℃］
20
－55～＋125
EIA
⑧Capacitance tolerance
Code
A
B
C
D
G
J
K
M
C0G
0±30ppm/℃
25
Nominal capacitance
0.5pF
1pF
10pF
100pF
1,000pF
0.01μF
0.1μF
1.0μF
10μF
100μF
Capacitance tolerance
±0.05pF
±0.1pF
±0.25pF
±0.5pF
±2％
±5％
±10％
±20％
⑨Thickness
Code
P
T
V
C
A
D
F
G
L
N
M
Capacitance
tolerance
±0.1pF
±0.25pF
±0.5pF
±1pF
±2％
±5％
Tolerance
code
B
C
D
F
G
J
Thickness［mm］
0.3
0.5
0.7(107type or more)
0.8
0.85(212type or more)
1.15
1.25
1.6
1.9
2.5
⑩Special code
Code
H
⑪Packaging
Code
F
R
T
CERAMIC CAPACITORS
⑦Nominal capacitance
Code
（example）
0R5
010
100
101
102
103
104
105
106
107
Note : R＝Decimal point
Capacitance change
Special code
MLCC for Industrial and Automotive
Packaging
φ178mm Taping （2mm pitch）
φ178mm Embossed Taping （4mm pitch）
φ178mm Taping （4mm pitch）
φ178mm Taping （4mm pitch, 1000 pcs/reel）
325 type（Thickness code M）
P
⑫Internal code
Code
△
Internal code
Standard
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
19
■STANDARD EXTERNAL DIMENSIONS
W
Type( EIA )
L
T
□MK063（0201）
□MK105（0402）
□MF105（0402）
e
□WK105（0204）※
□MK107（0603）
□MF107（0603）
L
□MJ107（0603）
W
□VS107（0603）
CERAMIC CAPACITORS
□WK107（0306）※
L
0.6±0.03
(0.024±0.001)
1.0±0.05
(0.039±0.002)
0.52±0.05
(0.020±0.002)
1.6±0.10
(0.063±0.004)
1.6±0.10
(0.063±0.004)
1.6±0.10
(0.063±0.004)
0.8±0.10
(0.031±0.004)
T
e
□MK212（0805）
□MF212（0805）
2.0±0.10
(0.079±0.004)
□MJ212（0805）
2.0±0.10
(0.079±0.004)
※ LW reverse type
□VS212（0805）
□WK212（0508）※
2.0±0.10
(0.079±0.004)
1.25±0.15
(0.049±0.006)
Dimension [mm] （inch）
W
T
0.3±0.03
0.3±0.03
(0.012±0.001)
(0.012±0.001)
0.5±0.05
0.5±0.05
(0.020±0.002)
(0.020±0.002)
1.0±0.05
0.3±0.05
(0.039±0.002)
(0.012±0.002)
0.8±0.10
0.8±0.10
(0.031±0.004)
(0.031±0.004)
0.8±0.10
0.8±0.10
(0.031±0.004)
(0.031±0.004)
0.8±0.10
0.7±0.10
(0.031±0.004)
(0.028±0.004)
1.6±0.10
0.5±0.05
(0.063±0.004)
(0.020±0.002)
0.85±0.10
(0.033±0.004)
1.25±0.10
(0.049±0.004)
1.25±0.10
(0.049±0.004)
0.85±0.10
(0.033±0.004)
1.25±0.10
(0.049±0.004)
1.25±0.10
(0.049±0.004)
1.25±0.10
0.85±0.10
(0.049±0.004)
(0.033±0.004)
2.0±0.15
0.85±0.10
(0.079±0.006)
(0.033±0.004)
□MK316（1206）
□MF316（1206）
3.2±0.15
(0.126±0.006)
1.6±0.15
(0.063±0.006)
□MJ316（1206）
3.2±0.15
(0.126±0.006)
1.6±0.15
(0.063±0.006)
□MK325（1210）
□MF325（1210）
□MJ325（1210）
3.2±0.30
(0.126±0.012)
3.2±0.30
(0.126±0.012)
2.5±0.20
(0.098±0.008)
2.5±0.20
(0.098±0.008)
4.5±0.40
3.2±0.30
□MK432（1812）
(0.177±0.016)
(0.126±0.012)
Note : ※. LW reverse type, *1.Thickness code
*1
T
V
P
A
A
C
V
D
G
D
G
D
D
1.15±0.10
(0.045±0.004)
Ｆ
1.6±0.20
(0.063±0.008)
L
1.15±0.10
(0.045±0.004)
Ｆ
1.6±0.20
(0.063±0.008)
1.15±0.10
(0.045±0.004)
1.9±0.20
(0.075±0.008)
2.5±0.20
(0.098±0.008)
1.9±0.20
(0.075±0.008)
2.5±0.20
(0.098±0.008)
2.5±0.20
(0.098±0.008)
L
e
0.15±0.05
(0.006±0.002)
0.25±0.10
(0.010±0.004)
0.18±0.08
(0.007±0.003)
0.35±0.25
(0.014±0.010)
0.35＋0.3/－0.25
(0.014＋0.012/－0.010)
0.35±0.25
(0.014±0.010)
0.25±0.15
(0.010±0.006)
0.5±0.25
(0.020±0.010)
0.5＋0.35/－0.25
（0.020＋0.014/－0.010）
0.5±0.25
(0.020±0.010)
0.3±0.2
(0.012±0.008)
0.5＋0.35/－0.25
（0.020＋0.014/－0.010）
0.6＋0.4/－0.3
（0.024＋0.016/－0.012）
F
N
0.6±0.3
(0.024±0.012)
M
N
M
M
0.6＋0.4/－0.3
（0.024＋0.016/－0.012）
0.9±0.6
(0.035±0.024)
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
20
19
■STANDARD QUANTITY
Type
063
105
107
EIA（inch）
0201
0402
0204 ※
0603
0306 ※
212
0805
316
1206
325
1210
432
1812
Note : ※.LW Reverse type（□WK）
Code
T
V
P
C
A
0.8
Standard quantity［pcs］
Paper tape
Embossed tape
15000
－
10000
－
4000
－
A
3000
（Soft Termination）
－
0.8
A
－
0.50
0.85
1.25
V
D
G
－
4000
－
1.25
G
－
0.85
1.15
1.6
1.15
1.9
2.5
2.5
D
F
L
F
N
M
M
4000
－
－
3000
（Soft Termination）
4000
－
3000
2000
（Soft Termination）
－
3000
2000
－
2000
－
－
500（T），1000（P）
500
CERAMIC CAPACITORS
0508 ※
Dimension
［ｍｍ］
0.3
0.5
0.30
0.7
0.8
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
21
■PART NUMBER
・ All the Multilayer Ceramic Capacitors of the catalog lineup are RoHS compliant.
・ Capacitance tolerance code is applied to [] of part number.
・ All the Multilayer Ceramic Capacitors in the catalog lineup are applicable for reflow-soldering.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive (AEC-Q200 Qualified) products for BODY & CHASSIS, and INFOTAINMENT. Please check ”Automotive Application Guide” for further details before using the products.
＜ ：AEC-Q200
qualified＞
AEC-Q200
All the Multilayer Ceramic Capacitors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
125℃ products： AEC-Q200 Grade1 (we conduct the evaluation at the test condition of Grade1.)
105℃ products： AEC-Q200 Grade2 (we conduct the evaluation at the test condition of Grade2.)
85℃ products： AEC-Q200 Grade3 (we conduct the evaluation at the test condition of Grade3.)
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ *2: Industrial products and Medical products
・ *3: For standard case size, please kindly refer to ④Dimension, ⑤Dimension tolerance, ⑨Thickness and STANDARD EXTERNAL DIMENSIONS.
Multilayer Ceramic Capacitors (High dielectric type)
CERAMIC CAPACITORS
●105TYPE (Demension:1.0×0.5mm JIS:1005 EIA:0402）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 0.5mm thickness（V）
Part number 1
UMK105 BJ471[]VHF
UMK105 BJ102[]VHF
UMK105 BJ152[]VHF
UMK105 BJ222[]VHF
UMK105 BJ332[]VHF
UMK105 BJ472[]VHF
UMK105 BJ682[]VHF
UMK105 BJ103[]VHF
UMK105 BJ223[]VHF
UMK105 BJ473[]VHF
UMK105 BJ104[]VHF
TMK105 BJ472[]VHF
TMK105 BJ682[]VHF
TMK105 BJ103[]VHF
TMK105 BJ153[]VHF
TMK105 BJ223[]VHF
TMK105 BJ333[]VHF
TMK105 BJ473[]VHF
TMK105 BJ104[]VHF
TMK105 BJ224[]VHF
TMK105ABJ474[]VHF
EMK105 BJ103[]VHF
EMK105 BJ153[]VHF
EMK105 BJ223[]VHF
EMK105 BJ333[]VHF
EMK105 BJ473[]VHF
EMK105 BJ104[]VHF
EMK105 BJ224[]VHF
EMK105ABJ474[]VHF
EMK105 BJ105[]VHF
LMK105 BJ333[]VHF
LMK105 BJ473[]VHF
LMK105 BJ104[]VHF
LMK105 BJ224[]VHF
LMK105ABJ474[]VHF
LMK105 BJ105[]VHF
LMK105ABJ225[]VHF
JMK105 BJ104[]VHF
JMK105 BJ224[]VHF
JMK105 BJ474[]VHF
JMK105 BJ105[]VHF
JMK105 BJ225[]VHF
JMK105BBJ475MVHF
AMK105 BJ225[]VHF
AMK105BBJ475MVHF
AMK105CBJ106MVHF
Part number 2
Rated voltage
[V]
50
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
470
1000
1500
2200
3300
4700
6800
0.01
0.022
0.047
0.1
4700
6800
0.01
0.015
0.022
0.033
0.047
0.1
0.22
0.47
0.01
0.015
0.022
0.033
0.047
0.1
0.22
0.47
1
0.033
0.047
0.1
0.22
0.47
1
2.2
0.1
0.22
0.47
1
2.2
4.7
2.2
4.7
10
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
5
5
10
2.5
2.5
3.5
3.5
3.5
3.5
3.5
5
10
10
3.5
3.5
3.5
3.5
3.5
5
10
10
10
3.5
3.5
5
5
10
10
10
5
5
10
10
10
10
10
10
10
p
p
p
p
p
p
p
μ
μ
μ
μ
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
150
200
200
200
150
200
200
200
200
200
150
150
150
150
150
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
*3
Thickness
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5+0.15/-0.05
0.5+0.20/-0
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
22
19
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 0.5mm thickness（V）
Part number 1
Part number 2
50
25
16
10
6.3
4
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
220
330
470
680
1000
1500
2200
3300
4700
6800
0.01
0.022
0.047
0.1
4700
6800
0.01
0.015
0.022
0.033
0.047
0.1
0.01
0.015
0.022
0.033
0.047
0.1
0.22
0.047
0.1
0.22
0.1
0.22
0.47
0.47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
10
10
2.5
2.5
3.5
3.5
3.5
3.5
3.5
10
3.5
3.5
3.5
3.5
3.5
5
10
3.5
5
10
5
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
0.022
0.047
0.1
0.22
0.47
1
0.022
0.047
0.1
0.22
0.47
1
2.2
0.1
0.22
0.47
1
2.2
4.7
0.47
1
2.2
4.7
10
1
2.2
4.7
10
10
22
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
10
10
10
2.5
3.5
3.5
10
10
10
2.5
3.5
3.5
5
3.5
10
10
3.5
5
3.5
5
10
10
3.5
5
10
10
10
5
10
10
10
10
10
p
p
p
p
p
p
p
p
p
p
μ
μ
μ
μ
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
150
200
200
150
200
200
200
150
150
150
150
150
200
150
150
150
150
150
150
150
150
150
150
150
150
150
Thickness*3 [mm]
Note
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Thickness*3 [mm]
Note
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.15/-0.05
0.8+0.20/-0
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
CERAMIC CAPACITORS
UMK105 B7221[]VHF
UMK105 B7331[]VHF
UMK105 B7471[]VHF
UMK105 B7681[]VHF
UMK105 B7102[]VHF
UMK105 B7152[]VHF
UMK105 B7222[]VHF
UMK105 B7332[]VHF
UMK105 B7472[]VHF
UMK105 B7682[]VHF
UMK105 B7103[]VHF
UMK105 B7223[]VHF
UMK105 B7473[]VHF
UMK105 B7104[]VHF
TMK105 B7472[]VHF
TMK105 B7682[]VHF
TMK105 B7103[]VHF
TMK105 B7153[]VHF
TMK105 B7223[]VHF
TMK105 B7333[]VHF
TMK105 B7473[]VHF
TMK105 B7104[]VHF
EMK105 B7103[]VHF
EMK105 B7153[]VHF
EMK105 B7223[]VHF
EMK105 B7333[]VHF
EMK105 B7473[]VHF
EMK105 B7104[]VHF
EMK105 B7224[]VHF
LMK105 B7473[]VHF
LMK105 B7104[]VHF
LMK105 B7224[]VHF
JMK105 B7104[]VHF
JMK105 B7224[]VHF
JMK105 B7474[]VHF
AMK105 B7474[]VHF
Rated voltage
[V]
●107TYPE (Dimension:1.6×0.8mm JIS:1608 EIA:0603）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 0.8mm thickness（A）
Part number 1
UMK107 BJ104[]AHT
UMK107 BJ224[]AHT
UMK107 BJ474[]AHT
UMK107ABJ105[]AHT
GMK107 BJ223[]AHT
GMK107 BJ473[]AHT
GMK107 BJ104[]AHT
GMK107 BJ224[]AHT
GMK107ABJ474[]AHT
GMK107 BJ105[]AHT
TMK107 BJ223[]AHT
TMK107 BJ473[]AHT
TMK107 BJ104[]AHT
TMK107 BJ224[]AHT
TMK107 BJ474[]AHT
TMK107 BJ105[]AHT
TMK107BBJ225[]AHT
EMK107 BJ104[]AHT
EMK107 BJ224[]AHT
EMK107 BJ474[]AHT
EMK107 BJ105[]AHT
EMK107ABJ225[]AHT
EMK107BBJ475[]AHT
LMK107 BJ474[]AHT
LMK107 BJ105[]AHT
LMK107 BJ225[]AHT
LMK107 BJ475[]AHT
LMK107BBJ106MAHT
JMK107 BJ105[]AHT
JMK107 BJ225[]AHT
JMK107 BJ475[]AHT
JMK107ABJ106[]AHT
AMK107ABJ106[]AHT
AMK107BBJ226MAHT
Part number 2
Rated voltage
[V]
50
35
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
200
200
150
150
150
150
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
23
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）, D7 : X7T（－55～＋125℃）】 0.8mm thickness（A）
Part number 1
Part number 2
CERAMIC CAPACITORS
UMK107 B7102[]AHT
UMK107 B7152[]AHT
UMK107 B7222[]AHT
UMK107 B7332[]AHT
UMK107 B7472[]AHT
UMK107 B7682[]AHT
UMK107 B7103[]AHT
UMK107 B7153[]AHT
UMK107 B7223[]AHT
UMK107 B7333[]AHT
UMK107 B7473[]AHT
UMK107 B7683[]AHT
UMK107 B7104[]AHT
UMK107 C7224[]AHTE
GMK107 B7473[]AHT
GMK107 B7104[]AHT
GMK107 B7224[]AHT
GMK107 B7474[]AHT
GMK107AB7105[]AHT
TMK107 B7223[]AHT
TMK107 B7473[]AHT
TMK107 B7104[]AHT
TMK107 B7224[]AHT
TMK107 B7474[]AHT
TMK107AB7105[]AHT
EMK107 B7473[]AHT
EMK107 B7104[]AHT
EMK107 B7224[]AHT
EMK107 B7474[]AHT
EMK107 B7105[]AHT
LMK107 B7224[]AHT
LMK107 B7474[]AHT
LMK107 B7105[]AHT
LMK107BD7225[]AHT
JMK107 B7105[]AHT
JMK107 B7225[]AHTR
Rated voltage
[V]
50
35
25
16
10
6.3
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7T
X7R
X7R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
4700
6800
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.22
0.047
0.1
0.22
0.47
1
0.022
0.047
0.1
0.22
0.47
1
0.047
0.1
0.22
0.47
1
0.22
0.47
1
2.2
1
2.2
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
10
10
10
2.5
3.5
3.5
10
10
10
3.5
3.5
5
10
10
5
3.5
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
0.1
0.22
0.47
1
2.2
0.1
0.22
0.47
1
2.2
4.7
10
1
2.2
4.7
10
2.2
4.7
10
4.7
10
22
22
47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±20
±20
3.5
3.5
3.5
5
3.5
3.5
3.5
5
10
3.5
3.5
3.5
3.5
5
10
10
3.5
5
10
10
5
10
10
5
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±10, ±20
±10, ±20
5
5
10
p
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
150
200
150
200
150
150
150
150
200
200
150
150
150
150
200
150
150
150
150
150
150
150
200
150
150
Thickness*3 [mm]
Note
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
●212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 1.25mm thickness（G）
Part number 1
Part number 2
UMK212 BJ104[]GHT
UMK212 BJ224[]GHT
UMK212 BJ474[]GHT
UMK212 BJ105[]GHT
GMK212 BJ104[]GHT
GMK212 BJ224[]GHT
GMK212 BJ474[]GHT
GMK212 BJ105[]GHT
GMK212BBJ225[]GHT
TMK212 BJ104[]GHT
TMK212 BJ224[]GHT
TMK212 BJ474[]GHT
TMK212 BJ105[]GHT
TMK212 BJ225[]GHT
TMK212BBJ475[]GHT
TMK212BBJ106[]GHT
EMK212 BJ105[]GHT
EMK212 BJ225[]GHT
EMK212ABJ475[]GHT
EMK212BBJ106[]GHT
LMK212 BJ225[]GHT
LMK212ABJ475[]GHT
LMK212ABJ106[]GHT
JMK212ABJ475[]GHT
JMK212ABJ106[]GHT
JMK212BBJ226MGHT
AMK212ABJ226MGHT
AMK212BBJ476MGHT
Rated voltage
[V]
50
35
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
150
150
200
150
150
150
150
200
150
200
150
150
150
150
150
150
150
150
200
150
150
200
150
150
150
150
Thickness*3 [mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25+0.20/-0
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
1.25+0.20/-0
1.25±0.10
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.20/-0
1.25+0.15/-0.05
1.25+0.20/-0
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 0.85mm thickness（D）
Part number 1
EMK212 BJ105[]DHT
EMK212ABJ225[]DHT
EMK212BBJ475[]DHT
Part number 2
Rated voltage
[V]
16
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
1μ
2.2 μ
4.7 μ
HTLT
Rated voltage x ％
200
150
150
Thickness*3 [mm]
Note
0.85±0.10
0.85±0.10
0.85±0.10
*1, *2
*1, *2
*1, *2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
24
19
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.25mm thickness（G）
Part number 1
Part number 2
50
35
25
16
10
6.3
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.22
0.47
1
0.22
1
0.22
0.33
0.47
1
2.2
0.22
0.33
0.47
1
2.2
4.7
1
2.2
4.7
4.7
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
3.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
10
3.5
10
3.5
3.5
3.5
10
10
3.5
3.5
3.5
10
10
10
10
10
10
10
10
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
150
150
150
150
150
150
200
150
150
150
200
200
200
150
150
150
150
150
150
150
150
Thickness*3 [mm]
Note
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
●316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 1.6mm thickness（L）
Part number 1
UMK316 BJ474[]LHT
UMK316 BJ105[]LHT
UMK316 BJ225[]LHT
UMK316ABJ475[]LHT
GMK316 BJ105[]LHT
GMK316 BJ225[]LHT
GMK316 BJ475[]LHT
GMK316BBJ106[]LHT
TMK316 BJ225[]LHT
TMK316 BJ475[]LHT
TMK316 BJ106[]LHT
EMK316 BJ225[]LHT
EMK316 BJ475[]LHT
EMK316 BJ106[]LHT
EMK316BBJ226MLHT
LMK316 BJ475[]LHT
LMK316 BJ106[]LHT
LMK316ABJ226[]ＬHT
JMK316 BJ106[]LHT
JMK316ABJ226[]LHT
JMK316ABJ476MLHT
JMK316BBJ107MLHT
AMK316ABJ107MLHT
Part number 2
Rated voltage
[V]
50
35
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.47
1
2.2
4.7
1
2.2
4.7
10
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
10
22
47
100
100
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±20
±20
3.5
3.5
10
10
3.5
10
10
10
3.5
5
5
3.5
5
5
10
5
5
10
5
10
10
10
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
150
150
200
150
150
150
200
150
150
200
150
150
150
150
150
150
200
150
150
150
150
Thickness*3 [mm]
Note
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*2
*2
CERAMIC CAPACITORS
UMK212 B7103[]GHT
UMK212 B7153[]GHT
UMK212 B7223[]GHT
UMK212 B7333[]GHT
UMK212 B7473[]GHT
UMK212 B7683[]GHT
UMK212 B7104[]GHT
UMK212 B7224[]GHT
UMK212 C7474[]GHTE
UMK212 B7105[]GHT
GMK212 B7224[]GHT
GMK212 B7105[]GHT
TMK212 B7224[]GHT
TMK212 B7334[]GHT
TMK212 B7474[]GHT
TMK212 B7105[]GHTR
TMK212 B7225[]GHT
EMK212 B7224[]GHT
EMK212 B7334[]GHT
EMK212 B7474[]GHT
EMK212 B7105[]GHTR
EMK212 B7225[]GHT
EMK212AB7475[]GHT
LMK212 B7105[]GHTR
LMK212 B7225[]GHT
LMK212 B7475[]GHT
JMK212 B7475[]GHT
JMK212AB7106[]GHT
Rated voltage
[V]
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
25
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 1.6mm thickness（L）
Part number 1
Part number 2
CERAMIC CAPACITORS
UMK316 B7473[]LHT
UMK316 B7683[]LHT
UMK316 B7104[]LHT
UMK316 B7154[]LHT
UMK316 B7224[]LHT
UMK316 B7334[]LHT
UMK316 B7474[]LHT
UMK316 B7105[]LHT
UMK316 B7225[]LHT
UMK316AC7475[]LHTE
GMK316 B7105[]LHT
GMK316 B7225[]LHT
GMK316AB7475[]LHT
TMK316 B7105[]LHT
TMK316 B7225[]LHT
TMK316AB7475[]LHT
TMK316AB7106[]LHT
EMK316 B7225[]LHT
EMK316AB7475[]LHT
EMK316AB7106[]LHT
LMK316 B7475[]LHT
LMK316AB7106[]LHT
JMK316AB7106[]LHT
JMK316AB7226[]LHT
AMK316AB7226[]LHT
AMK316AC7476MLHT
Rated voltage
[V]
50
35
25
16
10
6.3
4
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.047
0.068
0.1
0.15
0.22
0.33
0.47
1
2.2
4.7
1
2.2
4.7
1
2.2
4.7
10
2.2
4.7
10
4.7
10
10
22
22
47
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
10
2.5
3.5
10
10
3.5
3.5
10
10
3.5
10
10
5
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
±20
5
5
5
5
10
5
10
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±20
±10, ±20
±10, ±20
±20
±10, ±20
10
3.5
10
10
3.5
5
Capacitance
tolerance [％]
tanδ
[％]
±20
10
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
5
10
10
3.5
10
10
10
10
10
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
200
150
150
200
200
150
150
200
150
150
150
150
150
150
150
150
Thickness*3 [mm]
Note
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
●325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 2.5mm thickness（M）
Part number 1
Part number 2
UMK325 BJ106[]MHP
GMK325 BJ106[]MHP
TMK325 BJ106[]MHP
EMK325 BJ226[]MHP
EMK325ABJ476[]MHP
LMK325 BJ226[]MHP
LMK325 BJ476[]MHP
LMK325ABJ107MMHP
JMK325 BJ476[]MHP
JMK325ABJ107MMHP
AMK325ABJ107MMHP
AMK325ABJ227MMHP
Rated voltage
[V]
50
35
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
10
10
10
22
47
22
47
100
47
100
100
220
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
150
150
150
Thickness*3 [mm]
Note
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.30
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*2
*1, *2
*2
*2
*2
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 1.9mm thickness（N）
Part number 1
Part number 2
UMK325 BJ475[]NHT
GMK325 BJ225MNHT
GMK325 BJ475[]NHT
TMK325 BJ475[]NHT
EMK325 BJ475MNHT
EMK325 BJ106[]NHT
Rated voltage
[V]
50
35
25
16
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
4.7
2.2
4.7
4.7
4.7
10
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
200
150
150
200
150
Thickness*3 [mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Note
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
【Temperature Characteristic C6 : X6S（－55～＋105℃）】 2.5mm thickness（M）
Part number 1
Part number 2
JMK325AC6107MMHP
Rated voltage
[V]
6.3
Temperature
characteristics
Capacitance
[F]
X6S
100 μ
HTLT
Rated voltage x ％
150
Thickness*3 [mm]
Note
2.5±0.30
*2
Thickness*3 [mm]
Note
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 2.5mm thickness（M）
Part number 1
UMK325 B7225[]MHP
UMK325 B7335[]MHP
UMK325 B7475[]MHP
UMK325AB7106[]MHP
GMK325AB7106[]MHP
TMK325 B7335[]MHP
TMK325AB7106[]MHPR
TMK325 B7226[]MHP
EMK325 B7226[]MHP
LMK325 B7226[]MHP
JMK325 B7226[]MHPR
JMK325 B7476[]MHPR
Part number 2
Rated voltage
[V]
50
35
25
16
10
6.3
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
2.2
3.3
4.7
10
10
3.3
10
22
22
22
22
47
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
150
150
150
200
150
150
150
150
150
150
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
26
19
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.9mm thickness（N）
Part number 1
UMK325 B7105[]NHT
GMK325 B7225[]NHT
GMK325 B7475[]NHTR
TMK325 B7475[]NHT
EMK325 B7475[]NHT
EMK325 B7106[]NHTR
Part number 2
Rated voltage
[V]
50
35
25
16
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
1
2.2
4.7
4.7
4.7
10
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
10
10
3.5
10
HTLT
Rated voltage x ％
200
200
150
150
150
150
Thickness*3 [mm]
Note
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
CERAMIC CAPACITORS
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
27
■PART NUMBER
Multilayer Ceramic Capacitors （Temperature compensating type）
●063TYPE (Dimension:0.6×0.3mm JIS:0603 EIA:0201）
【Temperature Characteristic CG : CG/C0G（－55～＋125℃）】 0.3mm thickness（T）
Part number 1
Part number 2
CERAMIC CAPACITORS
UMK063 CG0R5CTHF
UMK063 CG010CTHF
UMK063 CG1R5CTHF
UMK063 CG020CTHF
UMK063 CG030CTHF
UMK063 CG040CTHF
UMK063 CG050CTHF
UMK063 CG060DTHF
UMK063 CG070DTHF
UMK063 CG080DTHF
UMK063 CG090DTHF
UMK063 CG100DTHF
UMK063 CG120JTHF
UMK063 CG150JTHF
UMK063 CG180JTHF
UMK063 CG220JTHF
UMK063 CG270JTHF
UMK063 CG330JTHF
UMK063 CG390JTHF
UMK063 CG470JTHF
UMK063 CG560JTHF
UMK063 CG680JTHF
UMK063 CG820JTHF
UMK063 CG101JTHF
TMK063 CG121JTHF
TMK063 CG151JTHF
TMK063 CG181JTHF
TMK063 CG221JTHF
Rated voltage
[V]
50
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
［at 1MHz］
Thickness*3 [mm]
Rated voltage x ％
(Min)
410
200
0.3±0.03
420
200
0.3±0.03
430
200
0.3±0.03
440
200
0.3±0.03
460
200
0.3±0.03
480
200
0.3±0.03
500
200
0.3±0.03
520
200
0.3±0.03
540
200
0.3±0.03
560
200
0.3±0.03
580
200
0.3±0.03
600
200
0.3±0.03
640
200
0.3±0.03
700
200
0.3±0.03
760
200
0.3±0.03
840
200
0.3±0.03
940
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
1000
200
0.3±0.03
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
●105TYPE (Dimension:1.0×0.5mm JIS:1005 EIA:0402）
【Temperature Characteristic CG : CG/C0G（－55～＋125℃）】 0.5mm thickness（V）
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
CG0R5CVHF
CG010CVHF
CG1R5CVHF
CG020CVHF
CG030CVHF
CG040CVHF
CG050CVHF
CG060DVHF
CG070DVHF
CG080DVHF
CG090DVHF
CG100DVHF
CG120JVHF
CG150JVHF
CG180JVHF
CG220JVHF
CG270JVHF
CG330JVHF
CG390JVHF
CG470JVHF
CG560JVHF
CG680JVHF
CG820JVHF
CG101JVHF
CG121JVHF
CG151JVHF
CG181JVHF
CG221JVHF
CG271JVHF
CG331JVHF
CG391JVHF
CG471JVHF
CG561JVHF
CG681JVHF
CG821JVHF
CG102JVHF
Part number 2
Rated voltage
[V]
50
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance
tolerance
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
［at 1MHz］
Thickness*3 [mm]
Rated voltage x ％
(Min)
410
200
0.5±0.05
420
200
0.5±0.05
430
200
0.5±0.05
440
200
0.5±0.05
460
200
0.5±0.05
480
200
0.5±0.05
500
200
0.5±0.05
520
200
0.5±0.05
540
200
0.5±0.05
560
200
0.5±0.05
580
200
0.5±0.05
600
200
0.5±0.05
640
200
0.5±0.05
700
200
0.5±0.05
760
200
0.5±0.05
840
200
0.5±0.05
940
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
1000
200
0.5±0.05
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
28
19
■PART NUMBER
Medium-High Voltage Multilayer Ceramic Capacitors
●107TYPE (Dimension:1.6×0.8mm JIS:1608 EIA:0603）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 0.8mm thickness（A）
Part number 1
B7102[]AHT
B7152[]AHT
B7222[]AHT
B7332[]AHT
B7472[]AHT
B7682[]AHT
B7103[]AHT
B7153[]AHT
B7223[]AHT
B7333[]AHT
B7473[]AHT
B7104[]AHT
C7224[]AHTE
Rated voltage
[V]
100
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
Capacitance
[F]
1000
1500
2200
3300
4700
6800
0.01
0.015
0.022
0.033
0.047
0.1
0.22
p
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
150
Thickness*3 [mm]
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
●212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 1.25mm thickness（G）
Part number 1
Part number 2
HMK212 B7472[]GHT
HMK212 B7682[]GHT
HMK212 B7103[]GHT
HMK212 B7153[]GHT
HMK212 B7223[]GHT
HMK212 B7333[]GHT
HMK212 B7473[]GHT
HMK212 B7683[]GHT
HMK212 B7104[]GHT
HMK212 B7224[]GHT
HMK212 C7474[]GHTE
HMK212BC7105[]GHTE
QMK212 B7472[]GHT
QMK212 B7682[]GHT
QMK212 B7103[]GHT
QMK212 B7153[]GHT
QMK212 B7223[]GHT
Rated voltage
[V]
100
250
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7S
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
4700
6800
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.22
0.47
1
4700
6800
0.01
0.015
0.022
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
p
p
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
2.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
Thickness*3 [mm]
Note
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.20/-0
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Thickness*3 [mm]
Note
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
Thickness*3 [mm]
Note
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
CERAMIC CAPACITORS
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
Part number 2
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 0.85mm thickness（D）
Part number 1
Part number 2
HMK212 B7102[]DHT
HMK212 B7152[]DHT
HMK212 B7222[]DHT
HMK212 B7332[]DHT
QMK212 B7102[]DHT
QMK212 B7152[]DHT
QMK212 B7222[]DHT
QMK212 B7332[]DHT
Rated voltage
[V]
100
250
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
1000
1500
2200
3300
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
p
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
150
150
150
150
●316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 1.6mm thickness（L）
Part number 1
HMK316 B7473[]LHT
HMK316 B7683[]LHT
HMK316 B7104[]LHT
HMK316 B7154[]LHT
HMK316 B7224[]LHT
HMK316 B7334[]LHT
HMK316 B7474[]LHT
HMK316 B7105[]LHT
HMK316AC7225[]LHTE
QMK316 B7223[]LHT
QMK316 B7333[]LHT
QMK316 B7473[]LHT
QMK316 B7683[]LHT
QMK316 B7104[]LHT
SMK316 B7153[]LHT
SMK316 B7223[]LHT
Part number 2
Rated voltage
[V]
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.047
0.068
0.1
0.15
0.22
0.33
0.47
1
2.2
0.022
0.033
0.047
0.068
0.1
0.015
0.022
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
150
150
150
150
120
120
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
29
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.15mm thickness（F）
Part number 1
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
Part number 2
B7102[]FHT
B7152[]FHT
B7222[]FHT
B7332[]FHT
B7472[]FHT
B7682[]FHT
B7103[]FHT
Rated voltage
[V]
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
1000
1500
2200
3300
4700
6800
0.01
p
p
p
p
p
p
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
2.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
120
120
120
120
120
120
120
Thickness*3 [mm]
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
●325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 2.5mm thickness（M）
Part number 1
Part number 2
HMK325 B7225[]MHP
HMK325 C7475[]MHPE
Rated voltage
[V]
100
Temperature
characteristics
Capacitance
[F]
X7R
X7S
2.2 μ
4.7 μ
CERAMIC CAPACITORS
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±10, ±20
3.5
3.5
Capacitance
tolerance [％]
tanδ
[％]
HTLT
Rated voltage x ％
200
150
Thickness*3 [mm]
Note
2.5±0.20
2.5±0.20
*1, *2
*1, *2
Thickness*3 [mm]
Note
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.9mm thickness（N）
Part number 1
Part number 2
HMK325 B7224[]NHT
HMK325 B7474[]NHT
HMK325 B7684[]NHT
HMK325 B7105[]NHT
QMK325 B7473[]NHT
QMK325 B7104[]NHT
QMK325 B7154[]NHT
QMK325 B7224[]NHT
SMK325 B7223[]NHT
SMK325 B7333[]NHT
SMK325 B7473[]NHT
Rated voltage
[V]
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.22
0.47
0.68
1
0.047
0.1
0.15
0.22
0.022
0.033
0.047
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
200
200
200
200
150
150
150
150
120
120
120
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.15mm thickness（F）
Part number 1
Part number 2
HMK325 B7104[]FHT
Rated voltage
[V]
100
Temperature
characteristics
Capacitance
[F]
X7R
0.1 μ
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
3.5
Capacitance
tolerance [％]
tanδ
[％]
HTLT
Rated voltage x ％
200
Thickness*3 [mm]
Note
1.15±0.10
*1, *2
●432TYPE (Dimension:4.5×3.2mm JIS:4532 EIA:1812）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 2.5mm thickness（M）
Part number 1
HMK432 B7474[]MHT
HMK432 B7105[]MHT
HMK432 B7155[]MHT
HMK432 B7225[]MHT
QMK432 B7104[]MHT
QMK432 B7224[]MHT
QMK432 B7334[]MHT
QMK432 B7474[]MHT
SMK432 B7473[]MHT
SMK432 B7683[]MHT
SMK432 B7104[]MHT
Part number 2
Rated voltage
[V]
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.47
1
1.5
2.2
0.1
0.22
0.33
0.47
0.047
0.068
0.1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
200
200
200
200
150
150
150
150
120
120
120
Thickness*3 [mm]
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
30
19
■PART NUMBER
Medium-High Voltage Multilayer Ceramic Capacitors for High Frequency Applications
●107TYPE (Dimension:1.6×0.8mm JIS:1608 EIA:0603）
【Temperature Characteristic CG : CG/C0G（－55～＋125℃）】 0.7mm thickness（C）
Part number 1
Rated voltage
[V]
250
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance
tolerance
0.2
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
±0.05pF, ±0.1pF
±0.05pF, ±0.1pF
±0.05pF, ±0.1pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±2％, ±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
*3
［at 1MHz］
Thickness [mm]
Rated voltage x ％
(Min)
804
200
0.7±0.10
806
200
0.7±0.10
808
200
0.7±0.10
810
200
0.7±0.10
812
200
0.7±0.10
814
200
0.7±0.10
815
200
0.7±0.10
816
200
0.7±0.10
818
200
0.7±0.10
820
200
0.7±0.10
822
200
0.7±0.10
824
200
0.7±0.10
826
200
0.7±0.10
830
200
0.7±0.10
832
200
0.7±0.10
836
200
0.7±0.10
840
200
0.7±0.10
844
200
0.7±0.10
848
200
0.7±0.10
854
200
0.7±0.10
860
200
0.7±0.10
866
200
0.7±0.10
872
200
0.7±0.10
878
200
0.7±0.10
886
200
0.7±0.10
894
200
0.7±0.10
902
200
0.7±0.10
912
200
0.7±0.10
924
200
0.7±0.10
936
200
0.7±0.10
950
200
0.7±0.10
964
200
0.7±0.10
982
200
0.7±0.10
1000
200
0.7±0.10
1020
200
0.7±0.10
1040
200
0.7±0.10
1060
200
0.7±0.10
1100
200
0.7±0.10
1120
200
0.7±0.10
1160
200
0.7±0.10
1200
200
0.7±0.10
1240
200
0.7±0.10
1280
200
0.7±0.10
1340
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
1400
200
0.7±0.10
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
CERAMIC CAPACITORS
QVS107 CG0R2[]CHT
QVS107 CG0R3[]CHT
QVS107 CG0R4[]CHT
QVS107 CG0R5[]CHT
QVS107 CG0R6[]CHT
QVS107 CG0R7[]CHT
QVS107 CGR75[]CHT
QVS107 CG0R8[]CHT
QVS107 CG0R9[]CHT
QVS107 CG010[]CHT
QVS107 CG1R1[]CHT
QVS107 CG1R2[]CHT
QVS107 CG1R3[]CHT
QVS107 CG1R5[]CHT
QVS107 CG1R6[]CHT
QVS107 CG1R8[]CHT
QVS107 CG020[]CHT
QVS107 CG2R2[]CHT
QVS107 CG2R4[]CHT
QVS107 CG2R7[]CHT
QVS107 CG030[]CHT
QVS107 CG3R3[]CHT
QVS107 CG3R6[]CHT
QVS107 CG3R9[]CHT
QVS107 CG4R3[]CHT
QVS107 CG4R7[]CHT
QVS107 CG5R1[]CHT
QVS107 CG5R6[]CHT
QVS107 CG6R2[]CHT
QVS107 CG6R8[]CHT
QVS107 CG7R5[]CHT
QVS107 CG8R2[]CHT
QVS107 CG9R1[]CHT
QVS107 CG100[]CHT
QVS107 CG110JCHT
QVS107 CG120JCHT
QVS107 CG130JCHT
QVS107 CG150JCHT
QVS107 CG160JCHT
QVS107 CG180JCHT
QVS107 CG200JCHT
QVS107 CG220JCHT
QVS107 CG240JCHT
QVS107 CG270JCHT
QVS107 CG300JCHT
QVS107 CG330JCHT
QVS107 CG360JCHT
QVS107 CG390JCHT
QVS107 CG430JCHT
QVS107 CG470JCHT
QVS107 CG510JCHT
QVS107 CG560JCHT
QVS107 CG620JCHT
QVS107 CG680JCHT
QVS107 CG750JCHT
QVS107 CG820JCHT
QVS107 CG910JCHT
QVS107 CG101JCHT
Part number 2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
31
■PART NUMBER
●212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805）
【Temperature Characteristic CG : CG/C0G（－55～＋125℃）】 0.85mm thickness（D）
Part number 1
CERAMIC CAPACITORS
QVS212 CG0R3[]DHT
QVS212 CG0R4[]DHT
QVS212 CG0R5[]DHT
QVS212 CG0R6[]DHT
QVS212 CG0R7[]DHT
QVS212 CGR75[]DHT
QVS212 CG0R8[]DHT
QVS212 CG0R9[]DHT
QVS212 CG010[]DHT
QVS212 CG1R1[]DHT
QVS212 CG1R2[]DHT
QVS212 CG1R3[]DHT
QVS212 CG1R5[]DHT
QVS212 CG1R6[]DHT
QVS212 CG1R8[]DHT
QVS212 CG020[]DHT
QVS212 CG2R2[]DHT
QVS212 CG2R4[]DHT
QVS212 CG2R7[]DHT
QVS212 CG030[]DHT
QVS212 CG3R3[]DHT
QVS212 CG3R6[]DHT
QVS212 CG3R9[]DHT
QVS212 CG4R3[]DHT
QVS212 CG4R7[]DHT
QVS212 CG5R1[]DHT
QVS212 CG5R6[]DHT
QVS212 CG6R2[]DHT
QVS212 CG6R8[]DHT
QVS212 CG7R5[]DHT
QVS212 CG8R2[]DHT
QVS212 CG9R1[]DHT
QVS212 CG100JDHT
QVS212 CG110JDHT
QVS212 CG120JDHT
QVS212 CG130JDHT
QVS212 CG150JDHT
QVS212 CG160JDHT
QVS212 CG180JDHT
QVS212 CG200JDHT
QVS212 CG220JDHT
QVS212 CG240JDHT
QVS212 CG270JDHT
QVS212 CG300JDHT
QVS212 CG330JDHT
QVS212 CG360JDHT
QVS212 CG390JDHT
QVS212 CG430JDHT
QVS212 CG470JDHT
QVS212 CG510JDHT
QVS212 CG560JDHT
QVS212 CG620JDHT
QVS212 CG680JDHT
QVS212 CG750JDHT
QVS212 CG820JDHT
QVS212 CG910JDHT
QVS212 CG101JDHT
Part number 2
Rated voltage
[V]
250
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance
tolerance
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±0.25pF, ±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
［at 1MHz］
Thickness*3 [mm]
Rated voltage x ％
(Min)
806
200
0.85±0.10
808
200
0.85±0.10
810
200
0.85±0.10
812
200
0.85±0.10
814
200
0.85±0.10
815
200
0.85±0.10
816
200
0.85±0.10
818
200
0.85±0.10
820
200
0.85±0.10
822
200
0.85±0.10
824
200
0.85±0.10
826
200
0.85±0.10
830
200
0.85±0.10
832
200
0.85±0.10
836
200
0.85±0.10
840
200
0.85±0.10
844
200
0.85±0.10
848
200
0.85±0.10
854
200
0.85±0.10
860
200
0.85±0.10
866
200
0.85±0.10
872
200
0.85±0.10
878
200
0.85±0.10
886
200
0.85±0.10
894
200
0.85±0.10
902
200
0.85±0.10
912
200
0.85±0.10
924
200
0.85±0.10
936
200
0.85±0.10
950
200
0.85±0.10
964
200
0.85±0.10
982
200
0.85±0.10
1000
200
0.85±0.10
1020
200
0.85±0.10
1040
200
0.85±0.10
1060
200
0.85±0.10
1100
200
0.85±0.10
1120
200
0.85±0.10
1160
200
0.85±0.10
1200
200
0.85±0.10
1240
200
0.85±0.10
1280
200
0.85±0.10
1340
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
1400
200
0.85±0.10
Note
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
32
19
■PART NUMBER
Soft Termination Multilayer Ceramic Capacitors
●107TYPE (Dimension:1.6×0.8mm JIS:1608 EIA:0603）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 0.8mm thickness（A）
Part number 1
Part number 2
25
35
50
100
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.047
0.1
0.22
0.47
1
0.047
0.1
0.22
0.47
1
1000
2200
4700
0.01
0.022
0.047
0.1
1000
2200
4700
0.01
0.022
0.047
0.1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
10
10
10
3.5
3.5
10
10
10
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
p
p
p
μ
μ
μ
μ
p
p
p
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
150
150
150
200
200
150
150
150
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Thickness*3 [mm]
Note
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.25/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.25/-0
0.8+0.15/-0.05
0.8+0.15/-0.05
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.15/-0.05
0.8+0.15/-0.05
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
●212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 0.85mm thickness（D）、1.25mm thickness（G）
Part number 1
JMJ212CB7106[]GHT
EMJ212CB7225[]GHT
EMJ212CB7475[]GHT
TMJ212CB7225[]GHT
GMJ212CB7105[]GHT
UMJ212BB7103[]GHT
UMJ212BB7223[]GHT
UMJ212BB7473[]GHT
UMJ212BB7104[]GHT
UMJ212BB7224[]GHT
UMJ212CC7474[]GHTE
UMJ212CB7105[]GHT
HMJ212KB7102[]DHT
HMJ212KB7222[]DHT
HMJ212BB7472[]GHT
HMJ212BB7103[]GHT
HMJ212BB7223[]GHT
HMJ212BB7473[]GHT
HMJ212BB7104[]GHT
HMJ212BB7224[]GHT
HMJ212CC7474[]GHTE
QMJ212KB7102[]DHT
QMJ212KB7222[]DHT
QMJ212BB7472[]GHT
QMJ212BB7103[]GHT
QMJ212BB7223[]GHT
Part number 2
Rated voltage
[V]
6.3
16
25
35
50
100
250
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
10
2.2
4.7
2.2
1
0.01
0.022
0.047
0.1
0.22
0.47
1
1000
2200
4700
0.01
0.022
0.047
0.1
0.22
0.47
1000
2200
4700
0.01
0.022
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
p
p
p
μ
μ
μ
μ
μ
μ
p
p
p
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
10
10
10
10
10
3.5
3.5
3.5
3.5
3.5
3.5
10
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
150
150
150
150
150
200
200
200
200
200
150
150
200
200
200
200
200
200
200
200
150
150
150
150
150
150
Thickness*3 [mm]
1.25+0.25/-0
1.25+0.25/-0
1.25+0.25/-0
1.25+0.25/-0
1.25+0.25/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.25/-0
1.25+0.25/-0
0.85±0.15
0.85±0.15
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
1.25+0.25/-0
0.85±0.15
0.85±0.15
1.25+0.20/-0
1.25+0.20/-0
1.25+0.20/-0
CERAMIC CAPACITORS
TMJ107BB7473[]AHT
TMJ107BB7104[]AHT
TMJ107BB7224[]AHT
TMJ107BB7474[]AHT
TMJ107CB7105[]AHR
GMJ107BB7473[]AHT
GMJ107BB7104[]AHT
GMJ107BB7224[]AHT
GMJ107BB7474[]AHT
GMJ107CB7105[]AHR
UMJ107AB7102[]AHT
UMJ107AB7222[]AHT
UMJ107BB7472[]AHT
UMJ107BB7103[]AHT
UMJ107BB7223[]AHT
UMJ107BB7473[]AHT
UMJ107BB7104[]AHT
HMJ107AB7102[]AHT
HMJ107AB7222[]AHT
HMJ107BB7472[]AHT
HMJ107BB7103[]AHT
HMJ107BB7223[]AHT
HMJ107BB7473[]AHT
HMJ107BB7104[]AHT
Rated voltage
[V]
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
33
■PART NUMBER
●316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 1.15mm thickness（F）、1.6mm thickness（L）
Part number 1
Part number 2
CERAMIC CAPACITORS
LMJ316BB7226[]LHT
EMJ316BB7475[]LHT
EMJ316BB7106[]LHT
TMJ316BB7474[]LHT
TMJ316BB7475[]LHT
TMJ316BB7106[]LHT
GMJ316BB7474[]LHT
GMJ316AB7225[]LHT
GMJ316BB7475[]LHT
GMJ316BB7106[]LHT
UMJ316BB7473[]LHT
UMJ316BB7104[]LHT
UMJ316BB7224[]LHT
UMJ316BB7474[]LHT
UMJ316BB7105[]LHT
UMJ316AB7225[]LHT
UMJ316BC7475[]LHTE
HMJ316 B7102[]FHT
HMJ316 B7222[]FHT
HMJ316 B7472[]FHT
HMJ316KB7103[]FHT
HMJ316BB7223[]LHT
HMJ316BB7473[]LHT
HMJ316BB7104[]LHT
HMJ316BB7224[]LHT
HMJ316BB7474[]LHT
HMJ316BB7105[]LHT
HMJ316BC7225[]LHTE
QMJ316 B7102[]FHT
QMJ316 B7222[]FHT
QMJ316 B7472[]FHT
QMJ316KB7103[]FHT
QMJ316BB7223[]LHT
QMJ316BB7473[]LHT
QMJ316BB7104[]LHT
SMJ316 B7102[]FHT
SMJ316 B7222[]FHT
SMJ316 B7472[]FHT
SMJ316KB7103[]FHT
SMJ316BB7223[]LHT
Rated voltage
[V]
10
16
25
35
50
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
22
4.7
10
0.47
4.7
10
0.47
2.2
4.7
10
0.047
0.1
0.22
0.47
1
2.2
4.7
1000
2200
4700
0.01
0.022
0.047
0.1
0.22
0.47
1
2.2
1000
2200
4700
0.01
0.022
0.047
0.1
1000
2200
4700
0.01
0.022
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
p
p
p
μ
μ
μ
μ
μ
μ
μ
μ
p
p
p
μ
μ
μ
μ
p
p
p
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
10
10
10
3.5
10
10
3.5
10
10
10
3.5
3.5
3.5
3.5
3.5
10
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
150
150
150
200
150
150
200
150
150
150
200
200
200
200
200
150
150
200
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
120
120
120
120
120
Thickness*3 [mm]
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.20
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.20
1.6±0.30
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.20
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.6±0.30
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.20
1.6±0.30
1.6±0.30
1.6±0.30
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.20
1.6±0.30
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
●325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210）
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C7 : X7S（－55～＋125℃）】 1.9mm thickness（N）、2.5mm thickness（M）
Part number 1
JMJ325KB7476[]MHP
EMJ325KB7226[]MHP
TMJ325AB7475[]MHP
TMJ325KB7106[]MHP
GMJ325AB7475[]MHP
GMJ325KB7106[]MHP
UMJ325AB7225[]MHP
UMJ325AB7475[]MHP
UMJ325KB7106[]MHP
HMJ325 B7223[]NHT
HMJ325 B7473[]NHT
HMJ325 B7104[]NHT
HMJ325 B7224[]NHT
HMJ325 B7474[]NHT
HMJ325 B7105[]NHT
HMJ325AB7225[]MHP
HMJ325KC7475[]MHPE
QMJ325 B7223[]NHT
QMJ325 B7473[]NHT
QMJ325 B7104[]NHT
QMJ325 B7224[]NHT
SMJ325 B7223[]NHT
SMJ325 B7473[]NHT
Part number 2
Rated voltage
[V]
6.3
16
25
35
50
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
47
22
4.7
10
4.7
10
2.2
4.7
10
0.022
0.047
0.1
0.22
0.47
1
2.2
4.7
0.022
0.047
0.1
0.22
0.022
0.047
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
10
10
5
10
5
10
3.5
5
10
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
150
150
150
150
150
150
200
150
150
200
200
200
200
200
200
200
150
150
150
150
150
120
120
Thickness*3 [mm]
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
2.5±0.30
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
2.5±0.30
2.5±0.30
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
*2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
34
19
■PART NUMBER
TM
LW Reversal Decoupling Capacitors (LWDC )
●105TYPE (Dimension:0.52×1.0mm JIS:0510 EIA:0204）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 0.3mm thickness（P）
Part number 1
Part number 2
TWK105 BJ104MPHF
EWK105 BJ224MPHF
LWK105 BJ474MPHF
AWK105 BJ105MPHF
Rated voltage
[V]
25
16
10
4
Temperature
characteristics
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
±20
±20
±20
±20
5
10
10
10
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
Thickness*3 [mm]
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Note
*1,
*1,
*1,
*1,
*2
*2
*2
*2
【Temperature Characteristic C6 : X6S（－55～＋105℃）, C7 : X7S（－55～＋125℃】 0.3mm thickness（P）
Part number 1
Part number 2
16
10
6.3
4
Temperature
characteristics
X6S
X7S
X6S
X7S
X7S
X6S
X7S
X6S
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.1
0.22
0.1
0.22
0.47
0.22
0.47
±20
±20
±20
±20
±20
±20
±20
±20
5
5
10
5
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±20
±20
±20
10
10
10
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
Thickness*3 [mm]
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
*2
●107TYPE (Dimension:0.8×1.6mm JIS:0816 EIA:0306）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 0.5mm thickness（V）
Part number 1
Part number 2
LWK107 BJ105MVHT
JWK107 BJ225MVHT
JWK107 BJ475MVHT
Rated voltage
[V]
10
6.3
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
1μ
2.2 μ
4.7 μ
HTLT
Rated voltage x ％
150
150
150
Thickness*3 [mm]
Note
0.5±0.05
0.5±0.05
0.5±0.05
*1, *2
*1, *2
*1, *2
CERAMIC CAPACITORS
EWK105 C6104MPHF
LWK105 C7104MPHF
LWK105 C6224MPHF
JWK105 C7104MPHF
JWK105 C7224MPHF
JWK105 C6474MPHF
AWK105 C7224MPHF
AWK105 C6474MPHF
Rated voltage
[V]
【Temperature Characteristic B7 : X7R（－55～＋125℃）, C6 : X6S（－55～＋105℃）, C7 : X7S（－55～＋125℃）】 0.5mm thickness（V）
Part number 1
Part number 2
TWK107 B7104MVHT
EWK107 B7224MVHT
EWK107 B7474MVHT
LWK107 B7474MVHT
JWK107 C7105MVHT
AWK107 C6225MVHT
AWK107 C6475MVHT
Rated voltage
[V]
25
16
10
6.3
4
Temperature
characteristics
X7R
X7R
X7R
X7R
X7S
X6S
X6S
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
0.47
1
2.2
4.7
±20
±20
±20
±20
±20
±20
±20
5
5
5
5
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±20
±20
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
10
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
Thickness*3 [mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Note
*1,
*1,
*1,
*1,
*1,
*1,
*1,
*2
*2
*2
*2
*2
*2
*2
●212TYPE (Dimension:1.25×2.0mm JIS:1220 EIA:0508）
【Temperature Characteristic BJ : X5R（－55～＋85℃）】 0.85mm thickness（D）
Part number 1
Part number 2
LWK212 BJ475[]DHT
JWK212 BJ106MDHT
AWK212 BJ226MDHT
Rated voltage
[V]
10
6.3
4
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
4.7 μ
10 μ
22 μ
HTLT
Rated voltage x ％
150
150
150
Thickness*3 [mm]
Note
0.85±0.10
0.85±0.10
0.85±0.10
*1, *2
*1, *2
*1, *2
【Temperature Characteristic C6 : X6S（－55～＋105℃）】 0.85mm thickness（D）
Part number 1
JWK212 C6475[]DHT
Part number 2
Rated voltage
[V]
6.3
Temperature
characteristics
Capacitance
[F]
X6S
4.7 μ
HTLT
Rated voltage x ％
150
Thickness*3 [mm]
Note
0.85±0.10
*1, *2
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
35
■PART NUMBER
・ All the Multilayer Ceramic Capacitors of the catalog lineup are RoHS compliant.
・ Capacitance tolerance code is applied to [] of part number.
・ All the Multilayer Ceramic Capacitors in the catalog lineup are applicable for reflow-soldering.
Note)
・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
・ *1: Automotive (AEC-Q200 Qualified) products for POWERTRAIN, and SAFETY. Please check ”Automotive Application Guide” for further details before using the products.
＜ ：AEC-Q200
qualified＞
AEC-Q200
All the Multilayer Ceramic Capacitors of *1 marks are tested based on the test conditions and methods defined in AEC-Q200 family item.
125℃ products： AEC-Q200 Grade1 (we conduct the evaluation at the test condition of Grade1.)
Please consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
and please review and approve TAIYO YUDEN's product specification before ordering.
・ *3: For standard case size, please kindly refer to ④Dimension, ⑤Dimension tolerance, ⑨Thickness and STANDARD EXTERNAL DIMENSIONS.
High Reliability Application Multilayer Ceramic Capacitors
CERAMIC CAPACITORS
●105TYPE (Demension:1.0×0.5mm JIS:1005 EIA:0402）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 0.5mm thickness（V）
Part number 1
Part number 2
UMF105 B7102[]VHF
UMF105 B7222[]VHF
UMF105 B7472[]VHF
UMF105 B7103[]VHF
TMF105 B7102[]VHF
TMF105 B7222[]VHF
TMF105 B7472[]VHF
TMF105 B7103[]VHF
TMF105 B7223[]VHF
TMF105 B7473[]VHF
EMF105 B7102[]VHF
EMF105 B7222[]VHF
EMF105 B7472[]VHF
EMF105 B7103[]VHF
EMF105 B7223[]VHF
EMF105 B7473[]VHF
EMF105 B7104[]VHF
LMF105 B7102[]VHF
LMF105 B7222[]VHF
LMF105 B7472[]VHF
LMF105 B7103[]VHF
LMF105 B7223[]VHF
LMF105 B7473[]VHF
LMF105 B7104[]VHF
Rated voltage
[V]
50
25
16
10
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
1000
2200
4700
0.01
1000
2200
4700
0.01
0.022
0.047
1000
2200
4700
0.01
0.022
0.047
0.1
1000
2200
4700
0.01
0.022
0.047
0.1
p
p
p
μ
p
p
p
μ
μ
μ
p
p
p
μ
μ
μ
μ
p
p
p
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
2.5
2.5
2.5
3.5
2.5
2.5
2.5
3.5
3.5
3.5
2.5
2.5
2.5
3.5
3.5
3.5
5
2.5
2.5
2.5
3.5
3.5
3.5
5
HTLT
Rated voltage x ％
200
200
150
200
200
200
200
200
150
150
200
200
200
200
200
200
150
200
200
200
200
200
200
200
Thickness*3 [mm]
Note
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Thickness*3 [mm]
Note
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
●107TYPE (Dimension:1.6×0.8mm JIS:1608 EIA:0603）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 0.8mm thickness（A）
Part number 1
UMF107 B7223[]AHT
UMF107 B7104[]AHT
TMF107 B7223[]AHT
TMF107 B7104[]AHT
EMF107 B7223[]AHT
EMF107 B7104[]AHT
EMF107 B7105[]AHT
LMF107 B7223[]AHT
LMF107 B7104[]AHT
LMF107 B7105[]AHT
Part number 2
Rated voltage
[V]
50
25
16
10
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.022
0.1
0.022
0.1
0.022
0.1
1
0.022
0.1
1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
3.5
3.5
3.5
3.5
3.5
3.5
10
3.5
3.5
10
HTLT
Rated voltage x ％
200
200
200
200
200
200
150
200
200
150
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
36
19
■PART NUMBER
●212TYPE (Dimension:2.0×1.25mm JIS:2012 EIA:0805）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.25mm thickness（G）
Part number 1
Part number 2
100
50
25
16
10
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.01
0.022
0.01
0.022
0.047
0.1
0.22
1
0.01
0.022
0.047
0.1
0.22
1
0.047
0.1
0.22
1
4.7
0.047
0.1
0.22
1
4.7
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
10
3.5
3.5
3.5
3.5
3.5
10
3.5
3.5
3.5
10
10
3.5
3.5
3.5
10
10
Capacitance
tolerance [％]
tanδ
[％]
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
150
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
150
Thickness*3 [mm]
Note
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25+0.15/-0.05
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
Thickness*3 [mm]
Note
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
*1
*1
*1
*1
*1
*1
*1
*1
Thickness*3 [mm]
Note
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
*1
*1
*1
*1
*1
*1
*1
Thickness*3 [mm]
Note
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
*1
*1
*1
*1
*1
*1
*1
*1
*1
●316TYPE (Dimension:3.2×1.6mm JIS:3216 EIA:1206）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.15mm thickness（F）
Part number 1
HMF316
HMF316
HMF316
HMF316
UMF316
UMF316
UMF316
UMF316
Part number 2
B7102[]FHT
B7222[]FHT
B7472[]FHT
B7103[]FHT
B7102[]FHT
B7222[]FHT
B7472[]FHT
B7103[]FHT
Rated voltage
[V]
100
50
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
1000
2200
4700
0.01
1000
2200
4700
0.01
p
p
p
μ
p
p
p
μ
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
CERAMIC CAPACITORS
HMF212 B7103[]GHT
HMF212 B7223[]GHT
UMF212 B7103[]GHT
UMF212 B7223[]GHT
UMF212 B7473[]GHT
UMF212 B7104[]GHT
UMF212 B7224[]GHT
UMF212 B7105[]GHT
TMF212 B7103[]GHT
TMF212 B7223[]GHT
TMF212 B7473[]GHT
TMF212 B7104[]GHT
TMF212 B7224[]GHT
TMF212 B7105[]GHT
EMF212 B7473[]GHT
EMF212 B7104[]GHT
EMF212 B7224[]GHT
EMF212 B7105[]GHT
EMF212AB7475[]GHT
LMF212 B7473[]GHT
LMF212 B7104[]GHT
LMF212 B7224[]GHT
LMF212 B7105[]GHT
LMF212 B7475[]GHT
Rated voltage
[V]
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.6mm thickness（L）
Part number 1
Part number 2
HMF316 B7104[]LHT
UMF316 B7104[]LHT
UMF316 B7105[]LHT
TMF316 B7104[]LHT
TMF316AB7475[]LHT
EMF316AB7106[]LHT
JMF316AB7106[]LHT
Rated voltage
[V]
100
50
25
16
6.3
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.1
0.1
1
0.1
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
3.5
3.5
3.5
3.5
10
10
10
HTLT
Rated voltage x ％
200
200
150
200
150
150
200
●325TYPE (Dimension:3.2×2.5mm JIS:3225 EIA:1210）
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 2.5mm thickness（M）
Part number 1
HMF325 B7225[]MHP
UMF325 B7225[]MHP
UMF325 B7475[]MHP
TMF325 B7225[]MHP
TMF325 B7475[]MHP
EMF325 B7225[]MHP
EMF325 B7475[]MHP
LMF325 B7225[]MHP
LMF325 B7475[]MHP
Part number 2
Rated voltage
[V]
100
50
25
16
10
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
2.2
2.2
4.7
2.2
4.7
2.2
4.7
2.2
4.7
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
tanδ
[％]
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
5
3.5
5
3.5
5
3.5
5
HTLT
Rated voltage x ％
150
200
150
200
200
200
200
200
200
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
19
37
■PART NUMBER
【Temperature Characteristic B7 : X7R（－55～＋125℃）】 1.9mm thickness（N）
Part number 1
CERAMIC CAPACITORS
HMF325 B7223[]NHT
HMF325 B7473[]NHT
UMF325 B7223[]NHT
UMF325 B7473[]NHT
UMF325 B7104[]NHT
UMF325 B7224[]NHT
UMF325 B7474[]NHT
UMF325 B7105[]NHT
TMF325 B7224[]NHT
TMF325 B7474[]NHT
TMF325 B7105[]NHT
EMF325 B7224[]NHT
EMF325 B7474[]NHT
EMF325 B7105[]NHT
LMF325 B7224[]NHT
LMF325 B7474[]NHT
LMF325 B7105[]NHT
Part number 2
Rated voltage
[V]
100
50
25
16
10
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
[F]
0.022
0.047
0.022
0.047
0.1
0.22
0.47
1
0.22
0.47
1
0.22
0.47
1
0.22
0.47
1
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±10,
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
2.5
2.5
2.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Thickness*3 [mm]
Note
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
hq_c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
38
19
Multilayer Ceramic Capacitors
■PACKAGING
①Minimum Quantity
●Taped package
Thickness
Type(EIA)
□MK021(008004)
□VS021(008004)
□MK042(01005)
□VS042(01005)
□MK063(0201)
□WK105(0204) ※
□MK105(0402)
□MF105(0402)
□VK105(0402)
□MK107(0603)
□WK107(0306) ※
□MF107(0603)
□VS107(0603)
□MJ107(0603)
□MK212(0805)
□WK212(0508) ※
□MF212(0805)
□VS212(0805)
□MJ212(0805)
□MK316(1206)
□MF316(1206)
□MJ316(1206)
□MK325(1210)
□MF325(1210)
□MJ325(1210)
□MK432(1812)
Note : ※ LW Reverse type.
mm
code
0.125
K
0.2
0.2
0.3
0.3
0.13
0.18
0.2
0.3
0.5
0.5
0.45
0.5
0.8
0.7
0.8
0.45
0.85
1.25
0.85
0.85
1.25
0.85
1.15
1.6
1.15
1.6
0.85
1.15
1.9
2.0max.
2.5
1.9
2.5
2.5
C, D
C
P,T
P
H
E
C
P
V
W
K
V
A
C
A
K
D
G
D
D
G
D
F
L
F
L
D
F
N
Y
M
N
M
M
Standard quantity [pcs]
Paper tape
Embossed tape
－
50000
－
40000
15000
10000
－
－
20000
15000
10000
10000
4000
－
4000
4000
3000
－
－
20000
15000
－
－
－
－
－
4000
－
－
3000
4000
－
－
4000
4000
－
4000
－
－
－
－
3000
－
－
2000
－
3000
2000
3000
2000
－
2000
－
－
－
－
1000
2000
500(T), 1000(P)
500
②Taping material
※No bottom tape for pressed carrier tape
●Card board carrier tape
●Embossed tape
Top tape
Top tape
Base tape
Sprocket hole
Sprocket hole
Bottom tape
Chip cavity
Base tape
Chip cavity
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Chip filled
Chip
※ LW Reverse type.
③Representative taping dimensions
●Paper Tape（8mm wide）
●Pressed carrier tape（ 2mm pitch）
Unit：mm（inch）
A
B
T
8.0±0.3
(0.315±0.012)
Sprocket hole
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
T1
2.0±0.05
(0.079±0.002)
F
4.0±0.1
(0.157±0.004)
Chip Cavity
Type(EIA)
Ａ
0.37
Insertion Pitch
Ｆ
Ｂ
0.67
□MK063(0201)
□WK105(0204) ※
0.65
1.15
□MK105(0402) （*1 C）
□MK105(0402) （*1 P）
Note *1 Thickness, C：0.2mm ,P：0.3mm. ※ LW Reverse type.
2.0±0.05
●Punched carrier tape （2mm pitch）
0.45max.
0.42max.
0.4max.
0.45max.
0.3max.
0.42max.
Unit：mm
T
8.0±0.3
(0.315±0.012)
B
2.0±0.05
(0.079±0.002)
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
A
F
T1
Unit：mm（inch）
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
Sprocket hole
Tape Thickness
Ｔ
4.0±0.1
(0.157±0.004)
Ａ
Chip Cavity
Ｂ
Insertion Pitch
Ｆ
Tape Thickness
Ｔ
0.65
1.15
2.0±0.05
0.8max.
Type(EIA)
□MK105 (0402)
□MF105 (0402)
□VK105 (0402)
Unit：mm
●Punched carrier tape （4mm pitch）
B
T
8.0±0.3
(0.315±0.012)
A
F
Unit：mm（inch）
1.75±0.1
(0.069±0.004）
3.5±0.05
(0.138±0.002)
Sprocket hole
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
4.0±0.1
(0.157±0.004)
2.0±0.1
(0.079±0.004)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Chip Cavity
Type(EIA)
Ａ
Insertion Pitch
Ｆ
Ｂ
□MK107(0603)
□WK107(0306) ※
1.0
1.8
□MF107(0603)
4.0±0.1
□MK212(0805)
1.65
2.4
□WK212(0508) ※
□MK316(1206)
2.0
3.6
Note：Taping size might be different depending on the size of the product. ※ LW Reverse type.
●Embossed tape（4mm wide）
Unit：mm
4.0±0.05
(0.157±0.002)
B
1.0±0.02
(0.039±0.001)
1.1max.
0.9±0.05
(0.035±0.002)
1.8±0.02
(0.071±0.001)
A
F
1.1max.
Unit：mm（inch）
φ0.8±0.04
(φ0.031±0.002)
Sprocket hole
Tape Thickness
Ｔ
2.0±0.04
(0.079±0.002)
Chip Cavity
Type(EIA)
□MK021(008004)
□VS021(008004)
□MK042(01005)
□VS042(01005)
Ａ
Ｂ
0.135
0.27
0.23
0.43
Insertion Pitch
Ｆ
K
Tape Thickness
T
1.0±0.02
0.5max.
0.25max.
Unit：mm
●Embossed tape（8mm wide）
Unit：mm（inch）
3.5±0.05
(0.138±0.002)
Sprocket hole
A
B
F
1.75±0.1
(0.069±0.004）
8.0±0.3
(0.315±0.012)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
4.0±0.1
(0.157±0.004)
2.0±0.1
(0.079±0.004)
Type(EIA)
□MK105(0402)
□WK107(0306) ※
□MK212(0805)
□MF212(0805)
□MK316(1206)
□MF316(1206)
□MK325(1210)
□MF325(1210)
Note： ※ LW Reverse type.
Chip Cavity
Ａ
0.6
1.0
Ｂ
1.1
1.8
1.65
2.4
2.0
3.6
2.8
3.6
Insertion Pitch
Ｆ
2.0±0.1
4.0±0.1
Tape Thickness
K
0.6max
1.3max.
T
0.2±0.1
0.25±0.1
3.4max.
0.6max.
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
●Embossed tape（12mm wide）
Unit：mm（inch）
5.5±0.05
(0.217±0.002)
Sprocket hole
A
B
4.0±0.1
(0.157±0.004)
12.0±0.3
(0.472±0.012)
1.75±0.1
(0.069±0.004）
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
2.0±0.1
(0.079±0.004)
F
Chip Cavity
Type(EIA)
Ａ
3.1
3.7
□MK325(1210)
□MK432(1812)
Ｂ
4.0
4.9
Insertion Pitch
Ｆ
8.0±0.1
8.0±0.1
K
4.0max.
4.0max.
Tape Thickness
E
2.0±0.5
T
0.6max.
0.6max.
Unit：mm
④Trailer and Leader
Blank portion
Chip cavity
Blank portion
Leader
100mm or more
(3.94inches or more)
160mm or more
(6.3inches or more)
Direction of tape feed
400mm or more
(15.7inches or more)
⑤Reel size
t
E
C
R
B
A
D
W
A
φ178±2.0
B
φ50min.
C
φ13.0±0.2
D
φ21.0±0.8
4mm wide tape
8mm wide tape
12mm wide tape
T
1.5max.
2.5max.
2.5max.
W
5±1.0
10±1.5
14±1.5
Unit：mm
R
1.0
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
Pull direction
0～20°
Top tape
Base tape
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E06R01
Multilayer Ceramic Capacitors
■RELIABILITY DATA
1.Operating Temperature Range
Temperature
Compensating（Class1）
Standard
High Frequency Type
－55 to ＋125℃
Specification
Temperature Range
B
－25 to ＋85℃
BJ
X5R
－55 to ＋85℃
B7
X7R
－55 to ＋125℃
C6
X6S
－55 to ＋105℃
C7
X7S
－55 to ＋125℃
D7
X7T
－55 to ＋125℃
LD(※)
X5R
－55 to ＋85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
Specified
Value
High Permittivity （Class2）
2. Storage Conditions
Temperature
Compensating（Class1）
Standard
High Frequency Type
－55 to ＋125℃
Specification
Temperature Range
B
－25 to ＋85℃
BJ
X5R
－55 to ＋85℃
B7
X7R
－55 to ＋125℃
C6
X6S
－55 to ＋105℃
C7
X7S
－55 to ＋125℃
D7
X7T
－55 to ＋125℃
LD(※)
X5R
－55 to ＋85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
Specified
Value
High Permittivity （Class2）
3. Rated Voltage
Specified
Value
Temperature
Compensating（Class1）
Standard
50VDC, 25VDC
High Frequency Type
50VDC, 25VDC
High Permittivity （Class2）
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC
4. Withstanding Voltage （Between terminals）
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
No breakdown or damage
High Permittivity （Class2）
Test
Methods and
Remarks
Class 1
Rated volta×3
Applied voltage
Duration
Charge/discharge current
Class 2
Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2） Note 1
Test
Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
10000 MΩmin.
C≦0.047μF : 10000 MΩ min.
C＞0.047μF : 500MΩ・μF
: Rated voltage
: 60±5 sec.
: 50mA max.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
6. Capacitance （Tolerance）
Specified
Value
Temperature
Compensating（Class1）
Standard
C□
U□
SL
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C＞10pF
: ±0.25pF
: ±0.5pF
: ±5% or ±10%
High Frequency Type
CH
0.3pF≦C≦2pF
C＞2pF
: ±0.1pF
: ±5%
BJ, B7, C6, C7, D7, LD(※) : ±10% or ±20%
Note: ※LD Low distortion high value multilayer ceramic capacitor
High Permittivity （Class2）
Test
Methods and
Remarks
Standard
Preconditioning
Measuring frequency
Measuring voltage Note
Bias application
Class 1
High Frequency Type
None
1ＭHz±10%
0.5 to 5Vrms
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1kHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1rms
one
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2） Note 1
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000
（C：Nominal capacitance）
Refer to detailed specification
BJ, B7, C6, C7, D7：2.5% max.
Class 1
High Frequency Type
None
1ＭHz±10%
1GHz
0.5 to 5Vrms
Standard
Test
Methods and
Remarks
Preconditioning
Measuring frequey
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment
Measuring jig
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1ｋHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
: HP4291A
: HP16192A
8. Temperature Characteristic （Without voltage application）
Temperature Characteristic ［ppm/℃］
C□ :
Temperature
Compensating（Class1）
0
CG,CH, CJ, CK
Standard
U□ : －750
SL
High Frequency Type
UJ, UK
: ＋350 to －1000
Temperature Characteristic ［ppm/℃］
C□ : 0
CH
Specified
Value
Tolerance ［ppm/℃］
G : ±30
H : ±60
J : ±120
K : ±250
Tolerance ［ppm/℃］
H : ±60
Capacitance
Reference
Temperature Range
change
temperature
±10%
20℃
－25 to ＋85℃
±15%
25℃
－55 to ＋85℃
±15%
25℃
－55 to ＋125℃
±22%
25℃
－55 to ＋105℃
±22%
25℃
－55 to ＋125℃
＋22/－33%
25℃
－55 to ＋125℃
±15%
25℃
－55 to ＋85℃
distortion high value multilayer ceramic capacitor
Specification
B
X5R
B7
X7R
C6
X6S
C7
X7S
D7
X7S
LD(※)
X5R
Note : ※LD Low
BJ
High Permittivity （Class2）
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
（C85－C20）
×106（ppm/℃）
C20×△T
△T＝65
Test
Methods and
Remarks
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B
X5R、X7R、X6S、X7S、X7T
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
（C－C2）
×100（%）
C2
C ：Capacitance in Step 1 or Step 3
C2 ：Capacitance in Step 2
9. Deflection
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
Appearance
Cpaitance change
: No abnormality
: Within±0.5 pF
Multilayer Ceramic Capacitors
105 Type
The other types
Glass epoxy-resin substrate
0.8mm
1.6mm
1mm （Soft Termination type:3mm）
10 sec.
※１：
105 Type thickness, C： 0.2mm ,P： 0.3mm.
042, 063,
Board
Thickness
Warp
Duration
: No abnormality
: Within ±5% or ±0.5 pF, whichever is larger.
Appearance
: No abnormality
Capacitance change : Within ±12.5%（BJ, B7, C6, C7, D7, LD(※)）
Note: ※LD Low distortion high value multilayer ceramic capacitor
High Permittivity （Class2）
Test
Methods and
Remarks
Appearance
Capacitance change
※１
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2）
Test
Methods and
Remarks
－
No mechanical damage.
－
High Frequency Type
Applied force
: 5N
Duration
: 10 sec.
11. Adhesive Strength of Terminal Electrodes
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
No terminal separation or its indication.
High Permittivity （Class2）
Test
Methods and
Remarks
Applied force
Duration
Multilayer Ceramic Capacitors
042, 063 Type
105 Type or more
2N
5N
30±5 sec.
12. Solderability
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
At least 95% of terminal electrode is covered by new solder.
High Permittivity （Class2）
Test
Methods and
Remarks
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5℃
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
13. Resistance to Soldering
Standard
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
High Frequency Type
Appearance
Capacitancecange
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5%
: Initial value
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Specified
Value
High Permittivity （Class2）
Appearance
: No abormality
Capactace change
: Within ±7.5%（BJ, B7, C6, C7, D7, LD(※)）
Dissipation factor
: Initial value
Insulation resistance
: Initial value
Withstanding voltage
（between terminals）: No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
lss 1
042, 063 Type
105 Type
Preconditioning
Preheating
Test
Methods and
Remarks
None
Solder temp.
Duration
Recovery
270±5℃
3±0.5 sec.
6 to 24 hrs （Standard condition） Noe 5
042、063 Type
Preconditioning
Preheating
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
150℃, 1 to 2 min.
150℃, 1 to 2 min.
Solder temp.
Duration
Recovery
Class 2
105, 107, 212 Type
316, 325 Type
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min.
150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs （Standard condition） Note 5
14. Temperature Cycle (Thermal Shock）
Standard
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±0.25pF
: Initial value
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Specified
Value
High Permittivity （Class2）
Appearance
: No abnormality
Capacitance change
: Within ±7.5% （BJ, B7, C6, C7, D7, LD(※)）
Dissipation factor
: Initial value
Insulation resistance
: Initial value
Withstanding voltage
（between terminals） : No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
Class 1
Preconditioning
Test
Methods and
Remarks
1 cycle
Number of cycles
Recovery
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
None
Step
1
2
3
4
Temperature（℃）
Minimum operating temperature
Normal temperature
Maximum operating temperature
Normal temperature
Time（min.）
30±3
2 to 3
30±3
2 to 3
5 times
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
15. Humidity （Steady State）
Appearance
Capacitance change
Q
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
High Permittivity （Class2）
Insulation resistance
: No abnormality
: Within ±5% or ±0.5pF, whichever is larger.
: C＜10pF : Q≧200＋10C
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩmin.
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±0.5pF,
: 1000 MΩmin.
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, D7, LD(※)）
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, D7, LD(※)）
Insulation resistance
: 50 MΩμF or 1000 MΩwhichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
Class 1
Standard
Test
Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
Class 2
All items
Thermal treatment（ at 150℃ for 1 hr） Note 2
40±2℃
90 to 95%RH
500＋24/－0 hrs
24±2 hrs （Standard condition） Note 5
High Frequency Type
None
40±2℃
60±2℃
90 to 95%RH
500＋24/－0 hrs
6 to 24 hrs （Standard condition） Note 5
16. Humidity Loading
Appearance
Capacitance change
Q
Standard
Insulation resistance
Temperature
Compensating（Class1）
Specified
Value
Appearance
Capacitance change
High Frequency Type
Insulation resistance
High Permittivity （Class2）
Note 1
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, D7, LD(※)）
Dissipation factor
: 5.0% max. （BJ, B7, C6, C7, D7, LD(※)）
Insulation resistance
: 25 MΩμF or 500 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
90 to 95%RH
500＋24/－0 hrs
Rated voltage
50mA max.
50mA max.
6 to 24 hrs （Standard condition） Note 5
24±2 hrs（Standard condition） Note 5
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge
current
Recovery
: No abnormality
: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
: 500 MΩmin.
Class 2
All items
Voltage treatment
（Rated voltage are applied for 1 hour at 40℃） Note 3
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
Standard
Test
Methods and
Remarks
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger.
: C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩmin.
Class 1
High Frequency Type
None
40±2℃
60±2℃
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
17. High Temperature Loading
Appearance
Capacitance change
Q
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
High Permittivity （Class2）
Test
Methods and
Remarks
Temperature
Duration
Applied voltage
Charge/discharge
current
Recovery
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±3% or ±0.3pF, whichever is larger.
: 1000 MΩmin.
Appearance
: No abnormality
Capacitance change
: Within ±12.5% （BJ, B7, C6, C7, D7, LD(※)）
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, D7, LD(※)）
Insulation resistance
: 50 MΩμF or 1000 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2
Class 2
BJ, LD(※)
C6
B7, C7, D7
Voltage treatment（Twice the rated voltage shall be applied for
1 hour at 85℃, 105℃ or 125℃） Note 3, 4
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2 Note 4
50mA max.
50mA max.
Standard
Preconditioning
Insulation resistance
: No abnormality
: Within ±3% or ±0.3pF, whichever is larger.
: C＜10pF： Q≧200＋10C
10≦C＜30pF：Q≧275＋2.5C
C≧30pF： Q≧350（C：Nominal capacitance）
: 1000 MΩmin.
Class 1
High Frequency Type
None
6 to 24hr （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for
24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning
measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the
"standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_reli_e-E06R01
Medium-High Voltage Multilayer Ceramic Capacitor
■RELIABILITY DATA
1. Operating Temperature Range
Temperature Compensating(High Frequency type)
CG(C0G)
: －55 to ＋125℃
Specified Value
High permittivity
X7R, X7S : －55 to ＋125℃
X5
: －55 to ＋85℃
B
: －25 to ＋85℃
2. Storage Temperature Range
Temperature Compensating(High Frequency type)
CG(C0G)
: －55 to ＋125℃
Specified Value
High permittivity
X7R, X7S : －55 to ＋125℃
X5R
: －55 to ＋85℃
B
: －25 to ＋85℃
3. Rated Voltage
Specified Value
100VDC(HMK,HMJ), 250VDC(QMK,QMJ,QVS), 630VDC(SMK,SMJ)
4. Withstanding Voltage（Between terminals）
Specified Value
No breakdown or damage
Test Methods and
Remarks
Applied voltage
Duration
Carge/discharge current
: Rated voltage×2.5（HMK,HMJ）, Rated voltage×2（QMK,QMJ,QVS）, Rated voltage×1.2（SMK,SMJ）
: 1 to 5sec.
: 50mA max.
５．Insulation Resistance
Temperature Compensating(High Frequency type)
10000MΩ min
Specified Value
High permittivity
100MΩμF or 10GΩ, whichever is smaller.
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage（HMK,HMJ, QMK,QMJ,QVS）, 500V（SMK,SMJ）
: 60±5sec.
: 50mA max.
6．Capacitance （Tolerance）
Temperature Compensating(High Frequency type)
±0.1pF (C＜5pF) ±0.25pF (C＜10pF) ±0.5pF (5pF≦C＜10pF) ±2%(C=10pF) ±5%(C≧10pF)
Specified Value
High permittivity
±10%, ±20%
Test Methods and
Remarks
Temperature Compensating(High Frequency type)
Measuring frequency
: 1MHz±10%
Measuring voltage
: 0.5 to 5Vrms
Bias application
: None
High permittivity
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
7．Q or Dissipation Factor
Temperature Compensating(High Frequency type)
C＜30pF : Q≧800＋20C
C≧30pF : Q≧1400
C:Normal Capacitance(/pF)
Specified Value
High permittivity
3.5%max（HMK,HMJ）
2.5%max（QMK,QMJ, SMK,SMJ）
Test Methods and
Remarks
Temperature Compensating(High Frequency type)
Measuring frequency
: 1MHz±10%
Measuring voltage
: 0.5 to 5Vrms
Bas application
: None
High permittivity
Measuring frequency
Measuring voltage
Bas application
: 1kHz±10%
: 1±0.2Vrms
: None
8．Temperature Characteristic of Capacitance
Temperature Compensating(High Frequency type)
C0G
:±30ppm（25 to ＋125℃）
Specified Value
Test Methods and
Remarks
High permittivity
B
: ±10%（－25 to ＋85℃）
X5R
: ±15%（－55 to ＋85℃）
X7R
: ±15%（－55 to ＋125℃）
X7S
: ±22%（－55 to ＋125℃）
Temperature Compensating(High Frequency type)
Capacitance at 25℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
ｆollowing equation.
（C85－C25）
×106×[ppm/℃]
C25×ΔT
High permittivity
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
Step
B
X5R、X7R、X7S
1
Minimum operating tempeature
2
20℃
25℃
3
Maximum operating temperature
（C－C2）
×100（%）
C2
C : Capacitance value in Step 1 or Step 3
C2 : Capacitance value in Step 2
9．Deflection
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
:±5% or ±0.5pF, whichever is larger.
Specified Value
High permittivity
Appearance
Capacitance change
Test Methods and
Remarks
Warp
Duration
Test board
Thicknss
:
:
:
:
: No abnormality
: Within±10%
1mm （Soft Termination type:3mm）
10sec.
Glass epoxy-resin substrate
1.6mm
Capacitance measurement shall be conducted with the board bent.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
10．Adhesive Strength of Terminal Electrodes
Specified Value
No terminal separation or its indication.
Temperature Compensating(High Frequency type)
Applied force
: 2N
Duration
: 10±5sec.
Test Methods and
Remarks
High permittivity
Applied force
: 5N
Duration
: 30±5sec.
11．Solderability
Specified Value
Test Methods and
Remarks
At least 95% of terminal electrode is covered by new solder
Eutectic solder
H60A or H63A
230±5℃
Solder type
Solder temperature
Duration
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
12．Resistance to Soldering
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
: C※≦10pF :±0.25pF C※＞10pF :±2.5%
Insulation resistance
: Initial value
Withstanding voltage
（between terminals） : No abnormality
Specified Value
Test Methods and
Remarks
※Normal capacitance
High permittivity
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: Within±15%（HMK,HMJ）, ±10%（QMK,QMJ, SMK,SMJ）
: Inital value
: Initial value
（between terminals） : No abnormality
Preconditioning
Solder temperature
Duration
Preheating conditions
Recovery
:
:
:
:
:
Thermal treatment（at 150℃ for 1hr） Note1 (Only High permittivity)
270±5℃
3±0.5sec.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
24±2hrs under the stadard condition Note3
13．Temperature Cycle （Thermal Shock）
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
: C※≦10pF :±0.25% C※＞10pF :±2.5%
Insulation resistance
: Initial value
Withstanding voltage
（between terminals） : No abnormality
Specified Value
Test Methods and
Remarks
High permittivity
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: Within±15%（HMK,HMJ）, ±7.5%（QMK,QMJ, SMK,SMJ）
: Initial value
: Initial value
（between terminals） : No abnormality
Preconditioning : Thermal treatment （at 150℃ for 1hr） Note1
Conditions for 1 cycle
Step
temperature（℃）
1
Minimum operating temperature
2
Normal temperature
3
Maximum operating temperature
4
Normal temperature
Number of cycles : 5 times
Recovery : 24±2hrs under the standard condition Note3
Time（min.）
30±3min.
2 to 3min.
30±3min.
2 to 3min.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
14．Humidity （Steady state）
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
: C※≦10pF :±0.5pF
Insulation resistance
: 1000MΩmin
Specified Value
Test Methods and
Remarks
C※＞10pF :±5% ※Normal capacitance
High permittivity
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
Within±15%
7%max（HMK,HMJ）, 5%max（QMK,QMJ, SMK,SMJ）.
25MΩμF or 1000MΩ, whichever is smaller.
Preconditioning
Temperature
Humidity
Duration
Recovery
:
:
:
:
:
Thermal treatment（at 150℃ for 1hr） Note1 (Only High permittivity)
40±2℃
90 to 95%RH
500 ＋24/－0 hrs
24±2hrs under the standard condition Note3
15．Humidity Loading
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
: C※≦2.0pF :±0.4pF 2.0pF＜C≦10pF : ±0.75pF C※＞10pF :±7.5%
: ※Normal capacitance
Insulation resistance
: 500MΩmin
Specified Value
High permittivity
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Test Methods and
Remarks
:
:
:
:
No abnormality
Within±15%
7%max（HMK,HMJ）, 5%max（QMK,QMJ, SMK,SMJ）.
10MΩμF or 500MΩ, whichever is smaller.
According to JIS 5102 clause 9.9.
Preconditioning
: Voltage treatment Note2 (Only High permittivity)
Temperature
: 40±2℃
Humidity
: 90 to 95%RH
Applied voltage
: Rated voltage
Charge/discharge current
: 50mA max.
Duration
: 500 ＋24/－0 hrs
Recovery
: 24±2hrs under the standard condition Note3
16．High Temperature Loading
Temperature Compensating(High Frequency type)
Appearance
: No abnormality
Capacitance change
: C※≦10pF :±0.3pF
Insulation resistance
:1000MΩmin
Specified Value
Test Methods and
Remarks
High permittivity
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
C※＞10pF :±3%
No abnormality
Within±15%
7%max（HMK,HMJ）, 5%max（QMK,QMJ, SMK,SMJ）.
50MΩμF or 1000MΩ, whichever is smaller.
According to JIS 5102 clause 9.10.
Preconditioning
: Voltage treatment Note2 (Only High permittivity)
Temperature
: Maximum operating temperature
Applied voltage
: Rated voltage×2（HMK,HMJ,QVS） Rated voltage×1.5（QMK,QMJ） Rated voltage×1.2（SMK,SMJ）
Charge/discharge current
: 50mA max.
Duration
: 1000 ＋24/－0 hrs
Recovery
: 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature
for 24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted
under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_mhv_reli_e-E06R01
Precautions on the use of Multilayer Ceramic Capacitors
■PRECAUTIONS
1. Circuit Design
Precautions
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
Precautions
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations （Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations （Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）Recommended land dimensions for typical chip capacitors
Land patterns for PCBs
●Multilayer Ceramic Capacitors : Recommended land dimensions
Land pattern
（unit: mm）
Solder-resist
Wave-soldering
Chip capacitor
Type
107
212
316
325
L
1.6
2.0
3.2
3.2
C
Size
W
0.8
1.25
1.6
2.5
A
0.8 to 1.0
1.0 to 1.4
1.8 to 2.5
1.8 to 2.5
B
0.5 to 0.8
0.8 to 1.5
0.8 to 1.7
0.8 to 1.7
B
A
B
C
0.6 to 0.8
0.9 to 1.2
1.2 to 1.6
1.8 to 2.5
Chip capacitor
W
L
Technical
considerations
Reflow-soldering
Type
042
063
105
L
0.4
0.6
1.0
Size
W
0.2
0.3
0.5
A
0.15 to 0.25
0.20 to 0.30
0.45 to 0.55
B
0.15 to 0.20
0.20 to 0.30
0.40 to 0.50
C
0.15 to 0.30
0.25 to 0.40
0.45 to 0.55
Note：Recommended land size might be different according
107
212
316
1.6
2.0
3.2
0.8
1.25
1.6
0.8 to 1.0
0.8 to 1.2
1.8 to 2.5
0.6 to 0.8
0.8 to 1.2
1.0 to 1.5
0.6 to 0.8
0.9 to 1.6
1.2 to 2.0
to the allowance of the size of the product.
●LWDC: Recommended land dimensions for reflow-soldering
（unit: mm）
Type
105
107
212
L
0.52
0.8
1.25
Size
W
1.0
1.6
2.0
A
0.18 to 0.22
0.25 to 0.3
0.5 to 0.7
B
0.2 to 0.25
0.3 to 0.4
0.4 to 0.5
C
0.9 to 1.1
1.5 to 1.7
1.9 to 2.1
325
3.2
2.5
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
432
4.5
3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
LWDC
W
L
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
（2）Examples of good and bad solder application
Items
Not eommended
Lead wire of component
Recommended
Solder-resist
Mixed mounting of SMD and
leaded components
Chassis
Solder (for grounding)
Solder-resist
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Hand-soldering of leaded
Components near mounted
components
Solder-resist
Solder-resist
Horizontal component
placement
◆Pattern configurations （Capacitor layout on PCBs）
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any
stresses from board warp or deflection.
Items
Not recommended
Recommended
possible mechanical
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
Deflection of board
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
E
D
Perforation
C
A
B
Slit
Magnitude of stress
A＞B＝C＞D＞E
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid
this, the following points shall be considerable.
（1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
（2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
（3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be
used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle
placement:
Items
Single-sided mounting
Not recommended
Recommended
chipping
or cracking
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
Technical
considerations
supporting pins
or back-up pins
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical
impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of
the pin shall be conducted periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in
stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect
components. Therefore, the following precautions shall be noted in the application of adhesives.
（1）Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f. The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
（2）The recommended amount of adhesives is as follows;
Amount adhesive
After capacitor are bonded
［Recommended condition］
a
a
Figure
212/316 case sizes as examples
a
0.3mm min
b
b
100 to 120μm
c
Adhesives shall not contact land
c
c
4. Soldering
Precautions
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
（1）Flux used shall be less than or equal to 0.1 wt%（ in Cl equivalent） of halogenated content. Flux having a strong acidity content shall
not be applied.
（2）When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
（3）When water-soluble flux is used, special care shall be taken to properly clean the boards.
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
Technical
considerations
◆Selection of Flux
1-1. When too much halogenated substance（Chlorine, etc.） content is used to activate flux, or highly acidic flux is used, it may lead to
corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted
and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high
humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning
methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
◆Soldering
･ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
･ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
･ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within
100 to 130℃.
･ Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
［Reflow soldering］
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
300
300
Peak
260℃ Max.
Within 10sec.
230℃
Within 10sec.
60sec. 60sec
Min.
200 Min.
Slow cooling
100
Temperature（℃）
Temperature（℃）
Preheating
200
100
0
0
Slow
cooling
Preheating150℃ Heating above
230℃
60sec. Min.
40sec. Max.
1/2T～1/3T
Capacitor
Caution
①The ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the
thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall
be kept as close to recommended times as possible.
③Allowable number of reflow soldering : 2 times max.
Solder
T
PC board
［Wave soldering］
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
300
Preheating
120sec. Min.
Peak
260℃ Max.
Within 10sec.
230～250℃
Within 3sec.
200
Slow cooling
100
Temperature（℃）
Temperature（℃）
300
0
200
120sec. Min.
Preheating
150℃
100
Slow
cooling
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only.
②Allowable number of wave soldering : 1 times max.
［Hand soldering］
【Recommended condition for Pb-free soldering】
400
400
300
200
Slow cooling
100
0
Preheating
60sec. Min.
Temperature（℃）
Temperature（℃）
300
⊿T
Slow cooling
200
Preheating
150℃ Min.
100
0
400
Peak
350℃ Max.
Within 3sec.
230～280℃
Within 3sec.
316type or less
200
0
Slow cooling
⊿T
Preheating
150℃ Min.
100
60sec. Min.
⊿T
⊿T≦150℃
Peak
280℃ Max.
Within 3sec.
300
温度（℃）
【Recommended conditions for eutectic soldering】
60sec. Min.
325type or more
⊿T
⊿T≦130℃
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors.
③Allowable number of hand soldering : 1 times max.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use
of the cleaning. （e.g. to remove soldering flux or other materials from the production process.）
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect
capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate
their outer coating, resulting in a degradation of the capacitor's electrical properties （especially insulation resistance）.
2. Inappropriate cleaning conditions（ insufficient or excessive cleaning） may adversely affect the performance of
the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead
to the
cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall
be carefully checked;
Ultrasonic output :
20 W/ℓ or less
Ultrasonic frequency :
40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
Precautions
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the
hardening period or
while left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat
may lead to damage or destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
（1）If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
（2）Please be careful that the mounted components do not come in contact with or bump against other boards or
components.
8. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature : Below 30℃
Humidity
: Below 70% RH
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as
time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so
care shall be
taken to design circuits . Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at
150℃ for 1hour.
Technical
considerations
If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and
quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the
above period, please check solderability before using the capacitors.
※RCR-2335B（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_prec_e-E07R01
High Reliability Application Multilayer Ceramic Capacitors
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
X7R（－55℃ to ＋125℃）
Test Methods and
Remarks
Continuous use is available in this range. （reference temperature : 25℃）
2.Highest Operating temperature Range
Specified Value
X7R（－55℃ to ＋125℃）
Test Methods and
Remarks
Maximum ambient temperature at which capacitors can be continuously used with rated voltage applied.
3. Rated Voltage
Specified Value
Please refer to the page of the "PART NUMBERS".
Test Methods and
Remarks
Continuous maximum applied voltage. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than
the rated voltage of the capacitor.
4. Shape and Dimensions
Specified Value
Please refer to the page of the "EXTERNAL DIMENSIONS".
５. Heat Treatment （ClassⅡ）
Test Methods and
Remarks
Initial value shall be measured after test sample is heat－treated at 150＋0/－10℃ for an hour and kept at room temperature for 24 ±
2 hours.
6. Voltage Treatment （ClassⅡ）
Test Methods and
Remarks
Initial value shall be measured after test sample is voltage－treated for an hour at temperature and voltage which are specified as test
conditions, and kept at room temperature for 24 ±2 hours.
７. Dielectric Withstanding Voltage （between terminals）
Specified Value
No abnormality.
Test Methods and
Remarks
Applied voltage
: Rated voltage × 2.5
Duration
: 1 to 5 seconds.
Charging and discharging current shall be 50mA max.
8. Insulation Resistance
Specified Value
Larger than whichever smaller of 500 MΩ・μF or 104 MΩ
Test Methods and
Remarks
Applied voltage
: Rated voltage
Duration
: 60±5 seconds.
Charging and discharging current shall be 50mA max.
9. Capacitance and Tolerance
Specified Value
Test Methods and
Remarks
Please refer to the page of the "PART NUMBERS".
Measurement frequency
Measurement voltage
: 1kHz±10%（C≦10μF）
: 1±0.2Vrms（C≦10μF）
0.5±0.1V（6.3V rated voltage）
Heat treatment specified in No.5 of the specification shall be conducted prior to measurement.
10. Q or Dissipation factor （tanδ）
Specified Value
Test Methods and
Remarks
Please refer to the page of the "PART NUMBERS".
Measurement frequency
Measurement voltage
: 1kHz±10%（C≦10μF）
: 1±0.2Vrms（C≦10μF）
0.5±0.1V（6.3V rated voltage）
Heat treatment specified in No.5 of the specification shall be conducted prior to measurement. NO DC bias is applied.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_reli_e-E06R01
11. Temperature Characteristic （without DC bias）
Specified Value
X7R（－55℃ to ＋125℃）：±15%
Test Methods and
Remarks
Confirming to EIA RS－198－D （1991）
Heat treatment specified in No.5 of the specification shall be conducted prior to measurement.
Change of the maximum capacitance deviation in step 1 to 5.
step
Temperature（℃）
1
＋25
2
Minimum operating temperature
3
＋25
4
Maximum operating temperature
5
＋25
12. Adhesive Force of Terminal Electrodes
Specified Value
Appearance：Terminal electrodes shall be no exfoliation or a sign of exfoliation.
Solder lands refer to fig.1.
Test Methods and
Remarks
Applying force
Duration
Board
Thickness
1608 size
5N
larger than 2012 size
10Ｎ
30±5 seconds.
Glass epoxy-resin substrate
1.6mm
Dimension
a
b
c
1608
1.0
3.0
1.2
Case size
2012
3216
1.2
2.2
4.0
5.0
1.65
2.0
3225
2.2
5.0
2.9
Fig.1
13. Vibration
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Initial value shall be satisfied.
: Initial value shall be satisfied.
: Initial value shall be satisfied.
Test Methods and
Remarks
Heat treatment specified in No.5 of the specification shall be conducted prior to test. Measurement shall be conducted after test sample is
heat treated as specified in No.5.
Solder lands refer to figure 1.
Direction of the vibration test
: X, Y, Z each of 3 orientations for 2 hours respectively （total 6 hours）
Vibrationfrequency
: 10 to 55 to 10Hz （1 minutes each）
Total amplitude
: 1.5 mm
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
14. Resistance to Soldering Heat
Specified Value
Appearance
Capacitance change
Dissipation ｆactor
Insulation resistance
Dielectric withstanding voltage
: No abnormality
: ≦±7.5%
: Initial value shall be satisfied.
: Initial value shall be satisfied.
（between terminals） : No abnormality
Test Methods and
Remarks
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Immerse test sample in an solder solution （Sn-3Ag-0.5Cu）.
Soldering temperature
: 270℃±5℃
Duration
: 3±0.5 seconds
Soaking position
: Test sample is soaked until the termnal electrode is covered in solder solution.
Preheating condition
: 3216 size or smaller size：120 to 150℃ for 1 minute,
3225 size：100 to 120℃ for 1 minute, 170 to 200℃ for 1 minute.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
15. Solderability
Specified Value
More than 95% of terminal electrode shall be covered with fresh solder.
Test Methods and
Remarks
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Immerse test sample in an solder solution（Sn-3Ag-0.5Cu）.
Soldering temperature
: 245℃±5℃
Duration
: 4±1 seconds
Dipping position
: Test sample is immersed until the terminal electrode is covered in solder solution.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_reli_e-E06R01
16. Thermal shock
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Dielectric withstanding voltage
: No abnormality
: ≦±7.5%
: Initial value shall be satisfied.
: Initial value shall be satisfied.
（between terminals） : No abnormality
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Measurement shall be conducted after test sample is heat treated as specified in No.5.
condition of the one cycle （Air－Air）
Step
Temperature（℃）
Time（min.）
Transfer time
1
Minimum usage temperature
15
within 20 seconds
2
Maximum usage temperature
15
within 20 seconds
Test cycles：100 times.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
Dimension
a
b
c
Fig.2
1608
0.6
2.2
0.9
Case size
2012
3216
0.8
2.0
3.0
4.4
1.3
1.7
3225
2.0
4.4
2.6
17. Humidity Loading
Specified Value
Note1
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±12.5%
5.0%max.
Larger than whichever smaller of 25MΩ・μF or 500MΩ
Test Methods and
Remarks
Test condition
: 85℃/85%RH.
Duration
: 1000 ＋48/－0 hours.
DC bias
: Applied rated voltage.
Voltage treatment specified in No.6 of the specification shall be conducted prior to test.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
18. High Temperature Loading
Specified Value
Note1
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
≦±12.5%
5.0%max.
Larger than whichever smaller of 25MΩ・μF or 500MΩ
Test Methods and
Remarks
Voltage treatment specified in No.6 of the specification shall be conducted prior to test.
Test sample shall be put in thermostatic oven with maximum temperature.
Applied voltage
: Rated voltage x 2
Duration
: 1000 ＋48/－0 hours.
Charging and discharging current shall be 50mA or less.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
19. Resistance to Flexure of substrate
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
Warp
Testing board
Thickness
Test board and solder lands
: 1ｍｍ
: Grass epoxy - resin substrate
: 1.6ｍｍ
: Refer to fig. 3.
Test Methods and
Remarks
No abnormality
≦±12.5%
5.0%max.
Initial value shall be satisfied.
Dimension
a
b
c
1608
0.6
2.2
0.9
Case size
2012
3216
0.8
2.0
3.0
4.4
1.3
1.7
3225
2.0
4.4
2.6
Fig.4
Fig.3
Measurement shall be made with board in the bent position.（fig.4）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_reli_e-E06R01
20. High Temperature Exposure
Specified Value
Note1
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
≦±12.5%
5.0%max.
Larger than whichever smaller of 500MΩ・μF or 10000MΩ
Test Methods and
Remarks
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Test sample shall be put in thermostatic oven with maximum temperature.
Duration : 1000 ＋48/－0 hours.
Initial value shall be measured after test sample is heat－treated specified No.5.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
21. Temperature Cycling
Specified Value
Note1
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
≦±7.5%
Initial value shall be satisfied
Initial value shall be satisfied
Test Methods and
Remarks
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Measurement shall be conducted after test sample is heat treated as specified in No.5.
condition of the one cycle
Step
Temperature（℃）
Time（min.）
1
Minimum usage temperature
30±3
2
＋25
2 to 3
3
Maximum usage temperature
30±3
4
＋25
2 to 3
Test cycles：200 times
Solder lands refer to fig. 2.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
22. Body strength
Specified Value
No mechanical damage
Applying force
Applying time
: 10Ｎ
: 10 seconds
Test Methods and
Remarks
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_reli_e-E06R01
Precautions on the use of High Reliability Application Multilayer Ceramic Capacitors
■PRECAUTIONS
1.Circuit Design
Precautions
◆Verification of operating environment, electrical rating and performance
1. A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social
ramifications.
As such, any capacitors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly
differentiated from components used in general purpose applications.
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be lower than their rated values.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than the rated value of the capacitor
chosen. For a circuit where both an AC and a pulse voltage may be present, the sum of their peak voltages should also be lower than
the capacitor's rated voltage.
2. Even if the applied voltage is lower than the rated value, the reliability of capacitors might be reduced if either a high frequency AC
voltage or a pulse voltage having rapid rise time is present in the circuit.
2. PCB Design
Precautions
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on a PCB, the amount of solder used （size of fillet） can directly affect capacitor performance. Therefore,
the following items must be carefully considered in the design of solder land patterns:
（1）The amount of solder applied can affect the ability of chips to withstand mechanical stresses which may lead to breaking or
cracking. Therefore, when designing land-patterns it is necessary to consider the appropriate size and configuration of the solder
pads which in turn determines the amount of solder necessary to form the fillets.
（2）When more than one part is jointly soldered onto the same land or pad, the pad must be designed so that each component's
soldering point is separated by solder-resist.
◆Pattern configurations （Capacitor layout on panelized [breakaway] PC boards）
1. After capacitors have been mounted on the boards, chips can be subjected to mechanical stresses in subsequent manufacturing
processes （PCB cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering the reflow soldered
boards etc.） For this reason, planning pattern configurations and the position of SMD capacitors should be carefully performed to
minimize stress.
◆Pattern configurations （Design of Land-patterns）
1. The following diagrams and tables show some examples of recommended patterns to prevent excessive solder amounts. （larger fillets
which extend above the component end terminations） Examples of improper pattern designs are also shown.
（1）Recommended land dimensions for a typical chip capacitor land patterns for PCBs
Land patterns for PCBs
Recommended land dimensions for reflow-soldering（unit: mm）
Land pattern
Type
107
212
316
325
Solder-resist
L
1.6
2.0
3.2
3.2
Chip capacitor
Size
W
0.8
1.25
1.6
2.5
A
0.8～1.0
0.8～1.2
1.8～2.5
1.8～2.5
C
B
0.6～0.8
0.8～1.2
1.0～1.5
1.0～1.5
C
0.6～0.8
0.9～1.6
1.2～2.0
1.8～3.2
B
A
B
Chip capacitor
W
Technical
considerations
L
Excess solder can affect the ability of chips to withstand mechanical stresses. Therefore, please take proper precautions when designing
land-patterns.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_prec_e-E07R01
（2）Examples of good and bad solder application
Items
Not recommended
Lead wire of component
Recommended
Solder-resist
Mixed mounting of SMD and
leaded components
Chassis
Solder (for grounding)
Solder-resist
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Hand-soldering of leaded
components near mounted
components
Solder-resist
Solder-resist
Horizontal component
placement
◆Pattern configurations （Capacitor layout on panelized [breakaway] PC boards）
1-1. The following is examples of good and bad capacitor layout; SMD capacitors should be located to minimize any possible mechanical
stresses from board warp or deflection.
Items
Not recommended
Recommended
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
Deflection of board
1-2. To layout the capacitors for the breakaway PC board, it should be noted that the amount of mechanical stresses given will vary
depending on capacitor layout. The example below shows recommendations for better design.
E
D
Perforation
C
A
B
Slit
Magnitude of stress
A＞B＝C＞D＞E
1-3. When breaking PC boards along their perforations, the amount of mechanical stress on the capacitors can vary according to the
method used. The following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and
perforation. Thus, any ideal SMD capacitor layout must also consider the PCB splitting procedure.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_prec_e-E07R01
3.Soldering
Precautions
◆Selection of Flux
1. Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
（1）Flux used should be with less than or equal to 0.1 wt% （equivalent to chlorine） of halogenated content. Flux having strong acidity
content should not be applied.
（2）When soldering capacitors on the board, the amount of flux applied should be controlled at the optimum level.
（3）When using water-soluble flux, special care should be taken to properly clean the boards.
◆Soldering
1. Temperature, time, amount of solder, etc. are specified in accordance with the following recommended conditions.
Sn-Zn solder paste can affect MLCC reliability performance.
Please contact us prior to usage.
◆Selection of Flux
1-1. When too much halogenated substance （Chlorine, etc.） content is used to activate the flux, or highly acidic flux is used, an excessive
amount of residue after soldering may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the
surface of the capacitors.
1-2. Flux is used to increase solderability in flow soldering, but if too much is applied, a large amount of flux gas may be emitted and may
detrimentally affect solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved by water content in the air, the residue on the surface of capacitors in high
humidity conditions may cause a degradation of insulation resistance and therefore affect the reliability of the components. The
cleaning methods and the capability of the machines used should also be considered carefully when selecting water-soluble flux.
◆Soldering
1-1. Preheating when soldering
Heating: Ceramic chip components should be preheated to within 100 to 130℃ of the soldering.
Cooling: The temperature difference between the components and cleaning process should not be greater than 100℃.
Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. Therefore,
the soldering process must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
【Recommended conditions for soldering】
［Reflow soldering］
Temperature profile
【Recommended conditions for Pd Free soldering】
300
300
200
60sec. 60sec
Min.
Min.
Peak
260℃ Max.
Within 10sec.
230℃
Within 10sec.
Slow cooling
100
Temperature（℃）
Technical
considerations
Temperature（℃）
Preheating
200
100
0
0
Slow
cooling
Preheating150℃ Heating above
230℃
60sec. Min.
40sec. Max.
※Ceramic chip components should be preheated to within 100 to
130℃ of the soldering.
※Assured to be reflow soldering for 2 times.
Caution
①The ideal condition is to have solder mass （fillet） controlled to 1/2 to 1/3 of the thickness of the capacitor, as shown below:
1/2T～1/3T
Capacitor
Solder
T
PC board
②Because excessive dwell times can detrimentally affect solderability, soldering duration should be kept as close to recommended
times as possible.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_c_mlcc_hra_prec_e-E07R01
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Taiyo Yuden:
LMF107B7473MAHT EMF325B7224KNHT EMF107B7105KAHT TMF325B7225KMHP EMF212B7473MGHT
LMF325B7474KNHT EMF105B7222KVHF UMF325B7473MNHT EMF316AB7475KLHT TMF105B7223MVHF
TMF212B7104MGHT TMF316B7225MLHT LMF105B7473MVHF TMF212B7223KGHT LMF212B7473KGHT
LMF316B7474MLHT UMF105B7222KVHF TMF212B7105MGHT HMF325B7225KMHP LMF325B7105KNHT
EMF107B7104MAHT TMF325B7224MNHT HMF325B7473KNHT LMF325B7475KMHP HMF325B7225MMHP
HMF316B7474KLHT TMF212B7224MGHT HMF316B7102MFHT UMF316B7472MFHT TMF325B7474KNHT
EMF105B7223MVHF EMF325B7225KMHP TMF325B7224KNHT TMF325B7475MMHP LMF105B7103KVHF
UMF316B7105MLHT EMF105B7472MVHF TMF105B7472MVHF UMF325B7223MNHT HMF316B7103MFHT
UMF325B7105KNHT TMF212B7473MGHT UMF107B7473KAHT LMF212B7104KGHT UMF212B7105MGHT
EMF212B7474MGHT LMF107B7105KAHT HMF316B7224MLHT EMF105B7473KVHF TMF325B7105KNHT
LMF212B7105MGHT HMF212B7223KGHT UMF325B7475KMHP TMF105B7473KVHF UMF325B7473KNHT
UMF316B7222MFHT HMF325B7223MNHT LMF107B7223KAHT HMF316B7472MFHT TMF107B7473MAHT
EMF107B7223MAHT TMF212B7473KGHT UMF325B7223KNHT UMF316B7102KFHT HMF316B7104MLHT
HMF325B7223KNHT UMF325B7104MNHT EMF316B7474KLHT TMF212B7103KGHT UMF316B7104KLHT
UMF325B7225KMHP EMF212B7105MGHT LMF325B7475MMHP UMF107B7104MAHT EMF107B7105MAHT
UMF212B7103MGHT UMF316B7472KFHT HMF316B7102KFHT EMF316AB7106MLHT LMF316B7224KLHT
TMF212B7224KGHT UMF107B7473MAHT LMF212B7104MGHT LMF316B7225MLHT LMF316AB7106KLHT
TMF105B7102MVHF LMF105B7102MVHF EMF325B7474KNHT LMF316B7225KLHT UMF325B7474MNHT
UMF212B7473KGHT TMF105B7103MVHF LMF105B7104KVHF LMF105B7104MVHF LMF107B7473KAHT
UMF316B7102MFHT EMF212B7473KGHT EMF325B7105MNHT EMF107B7224MAHT UMF316B7224KLHT
工商网监
湘ICP备2023018690号
