UMK105CH100DV-F

Notice for TAIYO YUDEN products　 Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ■ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ■ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’ s official sales channel”). It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel. ■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ■ Caution for export Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 12 notice_e-01 STANDARD MULTILAYER CERAMIC CAPACITORS （TEMPERATURE COMPENSATING TYPE） REFLOW ■ FEATURES ■ APPLICATIONS ◦ Improved higher density mounting. ◦ General electronic equipment ◦ Monolithic structure provides higher reliability. ◦ Communication equipment （cellular phone, wireless applications, etc.） ◦A wide range of capacitance values available in standard case sizes. ■ PART NUMBER U M K ❶ ❷ 0 ❸ ❶Rated voltage 〔VDC〕 E 16 T 25 U 50 M 1 K ❷Series name Multilayer ceramic capacitor 5 △ C H ❹ ❺ ❸End termination Plated ❹Dimension Type （inch） L×W 〔mm〕 042 （01005） 0.4×0.2 063 （0201） 0.6×0.3 105 （0402） 1.0×0.5 1 0 ❻ 1 ❼ ❻Temperature characteristics〔ppm/℃〕 C□：0 CH、CJ、CK Tolerance R□：－220 RH H：±60 S□：－330 SH、SJ、SK J：±120 T□：－470 TJ、TK K：±250 U□：－750 UJ、UK SL：＋350～－1000 □＝Tolerance V － F △ ❽ ❾ ❽Capacitance tolerance C ±0.25pF D ±0.5pF F ±1pF J ±5% K ±10% ❼Nominal capacitance 〔pF〕 example 0R5 0.5 010 1 100 10 ※R＝decimal point ❺Dimension tolerance △ Standard △＝Blank space J ❿ ⓫ ⓬ ❿Special code － Standard ⓫Packaging φ178mm Taping （2mm pitch） φ178mm Taping W （1mm pitch, 042 Type） F ❾Thickness〔mm〕 C,D 0.2 T 0.3 0.5 V, W ⓬Internal code △ Standard △＝Blank space ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Dimension [mm] Type □MK042 （01005 inch） □MK063 （0201 inch） □MK105 （0402 inch） T e Standard quantity [pcs] Paper tape Embossed tape L W 0.4±0.02 0.2±0.02 0.2±0.02 C,D 0.1±0.03 － 40000 0.6±0.03 0.3±0.03 0.3±0.03 T 0.15±0.05 15000 － 1.0±0.05 0.5±0.05 0.5±0.05 V,W 0.25±0.10 10000 － ■ AVAILABLE CAPACITANCE RANGE Cap ［pF］ Type 042 C□ 063 C□ 105 U□ VDC 16V 50V 25V ［3-digit］ 0.5 0R5 1 010 1.5 1R5 2 020 3 030 4 040 5 050 D T 6 060 7 070 8 080 9 090 10 100 T 12 120 15 150 18 180 22 220 27 270 33 330 39 390 C 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 Note: Letters in the table indicate thickness. C□ U□ SL R□ S□ T□ W W 50V W V V V ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 16 12 mlcc02_e-01 ■ REPRESENTATIVE PART NUMBERS ●042TYPE Class1【C△ characteristic】 Rated voltage Part number 1 16V Part number 2 Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CK CK CK CK CJ CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Internal code （P/N 1） Note Internal code （P/N 1） Note CAPACITORS EMK042 CK0R5CD EMK042 CK010CD EMK042 CK1R5CD EMK042 CK020CD EMK042 CJ030CD EMK042 CH040CD EMK042 CH050CD EMK042 CH060DD EMK042 CH070DD EMK042 CH080DD EMK042 CH090DD EMK042 CH100DD EMK042 CH120JD EMK042 CH150JD EMK042 CH180JC EMK042 CH220JC EMK042 CH270JC EMK042 CH330JC EMK042 CH390JC EMK042 CH470JC EMK042 CH560JC EMK042 CH680JC EMK042 CH820JC EMK042 CH101JC Temp. char. Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ●063TYPE Class1【C△ characteristic】 Rated voltage 50V Part number 1 Part number 2 UMK063 CK0R5CT UMK063 CK010CT UMK063 CK1R5CT UMK063 CK020CT UMK063 CJ030CT UMK063 CH040CT UMK063 CH050CT UMK063 CH060DT UMK063 CH070DT UMK063 CH080DT UMK063 CH090DT UMK063 CH100DT UMK063 CH120JT UMK063 CH150JT UMK063 CH180JT UMK063 CH220JT UMK063 CH270JT UMK063 CH330JT UMK063 CH390JT UMK063 CH470JT UMK063 CH560JT UMK063 CH680JT UMK063 CH820JT UMK063 CH101JT Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CK CK CK CK CJ CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【U△ characteristic】 Rated voltage 25V Part number 1 TMK063 UK0R5CT ＴMK063 UK010CT ＴMK063 UK1R5CT ＴMK063 UK020CT ＴMK063 UK030CT TMK063 UJ040CT TMK063 UJ050CT TMK063 UJ060DT TMK063 UJ070DT TMK063 UJ080DT TMK063 UJ090DT TMK063 UJ100DT TMK063 UJ120JT TMK063 UJ150JT Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave UK UK UK UK UK UJ UJ UJ UJ UJ UJ UJ UJ UJ 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc02_e-01 12 17 ■ REPRESENTATIVE PART NUMBERS ●105TYPE Class1【C△ characteristic】 Rated voltage 50V Part number 1 Part number 2 UMK105 CK0R5CV UMK105 CK010CV UMK105 CK1R5CV UMK105 CK020CV UMK105 CJ030CV UMK105 CH040CV UMK105 CH050CV UMK105 CH060DV UMK105 CH070DV UMK105 CH080DV UMK105 CH090DV UMK105 CH100DV UMK105 CH120JV UMK105 CH150JV UMK105 CH180JV UMK105 CH220JV UMK105 CH270JV UMK105 CH330JV UMK105 CH390JV UMK105 CH470JV UMK105 CH560JV UMK105 CH680JV UMK105 CH820JV UMK105 CH101JV UMK105 CH121JV UMK105 CH151JV UMK105 CH181JV UMK105 CH221JV UMK105 CH271JV UMK105 CH331JV Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CK CK CK CK CJ CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Internal code （P/N 1） Note Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【U△ characteristic】 Rated voltage 50V Part number 1 UMK105 UK0R5CV UMK105 UK010CV UMK105 UK1R5CV UMK105 UK020CV UMK105 UK030CV UMK105 UJ040CV UMK105 UJ050CV UMK105 UJ060DV UMK105 UJ070DV UMK105 UJ080DV UMK105 UJ090DV UMK105 UJ100DV UMK105 UJ120JV UMK105 UJ150JV UMK105 UJ180JV UMK105 UJ220JV UMK105 UJ270JV UMK105 UJ330JV UMK105 UJ390JV UMK105 UJ470JV UMK105 UJ560JV UMK105 UJ680JV UMK105 UJ820JV UMK105 UJ101JV UMK105 UJ121JV UMK105 UJ151JV UMK105 UJ181JV UMK105 UJ221JV UMK105 UJ271JV UMK105 UJ331JV Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave UK UK UK UK UK UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 18 12 mlcc02_e-01 ■ REPRESENTATIVE PART NUMBERS Class1【SL characteristic】 Rated voltage Part number 1 50V Part number 2 UMK105 SL121JV UMK105 SL151JV UMK105 SL181JV UMK105 SL221JV UMK105 SL271JV UMK105 SL331JV Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave SL SL SL SL SL SL 120 150 180 220 270 330 ±5% ±5% ±5% ±5% ±5% ±5% 1000 1000 1000 1000 1000 1000 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Internal code （P/N 1） Note Internal code （P/N 1） Note Internal code （P/N 1） Note Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【RH characteristic】 50V Part number 1 Part number 2 UMK105 RH5R6JW UMK105 RH6R8JW UMK105 RH8R2JW UMK105 RH100JW UMK105 RH120JW UMK105 RH150JW UMK105 RH180JW UMK105 RH200JW Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave RH RH RH RH RH RH RH RH 5.6 6.8 8.2 10 12 15 18 20 ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 512 536 564 600 640 700 760 800 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% CAPACITORS Rated voltage Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【S△ characteristic】 Rated voltage 50V Part number 1 Part number 2 UMK105 SK0R5BW UMK105 SK010BW UMK105 SK1R2BW UMK105 SK1R5BW UMK105 SK1R8BW UMK105 SK2R2JW UMK105 SK2R7JW UMK105 SJ3R3JW UMK105 SJ3R9JW UMK105 SH4R7JW UMK105 SH5R6JW UMK105 SH6R8JW UMK105 SH8R2JW UMK105 SH100JW UMK105 SH120JW UMK105 SH150JW UMK105 SH180JW UMK105 SH200JW Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave SK SK SK SK SK SK SK SJ SJ SH SH SH SH SH SH SH SH SH 0.5 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 20 ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 424 430 436 444 454 466 478 494 512 536 564 600 640 700 760 800 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【T△ characteristic】 Rated voltage 50V Part number 1 UMK105 TK0R5BW UMK105 TK010BW UMK105 TK1R2BW UMK105 TK1R5BW UMK105 TK1R8BW UMK105 TK2R2JW UMK105 TK2R7JW UMK105 TK3R3JW UMK105 TK3R9JW UMK105 TJ4R7JW UMK105 TJ5R6JW UMK105 TJ6R8JW UMK105 TJ8R2JW UMK105 TJ100JW UMK105 TJ120JW UMK105 TJ150JW UMK105 TJ180JW UMK105 TJ200JW Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave TK TK TK TK TK TK TK TK TK TJ TJ TJ TJ TJ TJ TJ TJ TJ 0.5 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 20 ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 424 430 436 444 454 466 478 494 512 536 564 600 640 700 760 800 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc02_e-01 12 19 ■ PACKAGING ①Minimum Quantity ◦Taped package Thickness Type □MK042 □MK063 □2K096 □WK105 □MK105 □VK105 □MK107 □WK107 □2K110 □MK212 □WK212 □4K212 □2K212 □MK316 □MK325 □MK432 mm code 0.2 0.3 0.3 0.45 0.3 0.2 0.3 0.5 0.5 0.45 0.5 0.8 0.5 0.6 0.8 0.45 0.85 1.25 0.85 0.85 0.85 1.15 1.25 1.6 0.85 1.15 1.9 2.0max 2.5 2.5 C,D P,T P K P C P V, W W K V A V B A K D G D D D F G L D F N Y M M Standard quantity [pcs] Embossed tape — 40000 15000 ③Representative taping dimensions 　◦Paper Tape（8mm wide） 　◦Pressed carrier tape（2mm pitch） 㧗0.1/−0 Paper tape 10000 20000 15000 — T1 10000 4000 — 4000 Unit：mm 4000 — — 3000 4000 — Type ※No bottom tape for pressed carrier tape Insertion Pitch Ｆ □MK063 □2K096 □WK105 MK105 （*1C） 0.65 1.15 MK105 （*1P） 1 * Thickness, C：0.2mm、P：0.3mm Tape Thickness Ｔ T1 0.45max. 0.42max. 0.4max. 0.45max. 0.3max. 0.42max. 2.0±0.05 ◦Punched carrier tape（2mm pitch） 㧗0.1/−0 — 3000 2000 — — 500（T）, 1000（P） 500 Unit：mm Type ②Taping material Chip Cavity Ａ Ｂ 0.37 0.67 0.65 1.02 □2K096 □MK105 □VK105 Chip Cavity A B 0.72 1.02 0.65 Insertion Pitch F Tape Thickness T 0.6max. 52.0±0.05 1.15 0.8max. ◦Paper tape ◦Punched carrier tape（4mm pitch） 㧗0.1/−0 Unit：mm ◦Embossed tape Type □MK107 □WK107 □2K110 □MK212 □WK212 □4K212 □2K212 □MK316 Chip Cavity A B Insertion Pitch F Tape Thickness T 1.0 1.8 1.1max. 1.15 1.55 1.0max. 1.65 2.4 2.0 3.6 4.0±0.1 1.1max. ◦Chip filled Note：Taping size might be different depending on the size of the product. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_pack-P1 12 mlcc_pack_e-01 ■ PACKAGING ◦Embossed tape（4mm wide） ④Trailer and Leader 0.8±0.04 4.0±0.05 1.8±0.02 0.9±0.05 100mm or more Trailer 160mm min. Leader 400mm min. Ｆ 1.0±0.02 2.0±0.04 Unit：mm Type □MK042 Chip Cavity A B 0.23 0.43 Insertion Pitch F 1.0±0.02 Tape Thickness K T 0.5max. 0.25max. ⑤Reel size t E C ◦Embossed tape（8mm wide） 㧗0.1/−0 A B D R W Unit：mm A φ178±2.0 B φ50min. C φ13.0±0.2 D φ21.0±0.8 E 2.0±0.5 R 1.0 4mm wide tape 8mm wide tape 12mm wide tape t 1.5max. 2.5max. 2.5max. W 5±1.0 10±1.5 14±1.5 Unit：mm Type □WK107 □MK212 □MK316 □MK325 Chip Cavity A B 1.0 1.8 1.65 2.4 2.0 3.6 2.8 3.6 Insertion Pitch F 4.0±0.1 Tape Thickness K T 1.3max 0.25±0.1 3.4max. 0.6max. ◦Embossed tape（12mm wide） ⑥Top Tape Strength 㧗0.1/−0 The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below. 2.0±0.1 F Type □MK432 Chip Cavity A B 3.7 4.9 Unit：mm Insertion Pitch F 8.0±0.1 Tape Thickness K T 4.0max. 0.6max. ⑦Bulk Cassette The exchange of individual specification is necessary. Please contact Taiyo Yuden sales channels. 12±0.1 36＋0/−0.2 110±0.7 8.8±0.1 2.0＋0/−0.1 1.5＋0.1/−0 6.8±0.1 12.0±0.1 ＋0/−0.2 ＋0.2/−0 1.0＋0/−0.1 Unit：mm ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_pack_e-01 12 mlcc_pack-P2 ■ RELIABILITY DATA Super Low Distortion Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic Capacitors are noted separately. Multilayer Ceramic Capacitors 1.Operating Temperature Range Temperature Compensating （Class 1） Specified Value Standard High Frequency Type －55 to ＋125℃ BJ B7 C6 C7 High Permittivity（Class 2） F Specification B X5R X7R X6S X7S F Y5V Temperature Range －25 to ＋85℃ －55 to ＋85℃ －55 to ＋125℃ －55 to ＋105℃ －55 to ＋125℃ －25 to ＋85℃ －30 to ＋85℃ 2. Storage Conditions Temperature Compensating （Class 1） Specified Value Standard High Frequency Type －55 to ＋125℃ BJ B7 C6 C7 High Permittivity（Class 2） F Specification B X5R X7R X6S X7S F Y5V Temperature Range －25 to ＋85℃ －55 to ＋85℃ －55 to ＋125℃ －55 to ＋105℃ －55 to ＋125℃ －25 to ＋85℃ －30 to ＋85℃ 3. Rated Voltage Temperature Compensating Specified（Class 1） Value High Permittivity（Class 2） Standard High Frequency Type 4. Withstanding Voltage （Between terminals） Standard Temperature Compensating Specified（Class 1） High Frequency Type Value High Permittivity （Class 2） 【Test Methods and Remarks】 Applied voltage Duration Charge/discharge current 50VDC, 25VDC, 16VDC 50VDC, 16VDC 50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC No breakdown or damage Class 1 Class 2 Rated voltage×3 Rated voltage×2.5 1 to 5 sec. 50mA max. 5. Insulation Resistance Standard Temperature Compensating High Frequency Type Specified（Class 1） Value High Permittivity（Class 2）Note 1 10000 MΩ min. C≦0.047μF : 10000 MΩ min. C＞0.047μF : 500MΩ・μF 【Test Methods and Remarks】 Applied voltage: Rated voltage Duration: 60±5 sec. Charge/discharge current: 50mA max. 6. Capacitance（Tolerance） Standard Temperature Compensating Specified（Class 1） Value High Frequency Type High Permittivity（Class 2） 【Test Methods and Remarks】 Standard Preconditioning Measuring frequency Measuring voltage Note 1 Bias application C△ U△ 0.5pF≦C≦5pF：±0.25pF 0.5pF