1N4006

P rel iminary Data She et General Purpose Rectifiers Standard Recovery Plastic Silicon Rectifiers Specification Features: Case: Epoxy, Molded Weight: 0.4 gram (approximately) Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: 260℃ Max. For 10 Seconds 1.16 Inch From Case RoHS Compliant Low Reverse Leakage, High Forward Surge Capability Cathode Indicated By Polarity Band 1N4001 KEL DEVICE MARKING DIAGRAM AXIAL LEAD DO-41 Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Junction to Ambient) TA = 25°C unless otherwise noted Symbol VRRM VR IF(AV) IFSM TJ, TSTG RθJA 1N4001 50 50 1N4002 100 100 1N4003 200 200 1N4004 400 400 1.0 30 -65 to +175 65 1N4005 600 600 1N4006 800 800 1N4007 1000 1000 Units V V A A °C °C/W Electrical Characteristics Parameter TA = 25°C unless otherwise noted Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units Reverse Current @VR IR 5 1N4001 KEL : Device Name 1N4001~1N4007 : KEL Logo uA Forward Voltage @1A Total Capacitance @VR=4V, f=1MHz VF 1.1 V CT 15 pF August 2007 Release / A Page 1 1N4001 through 1N4007 Series P rel iminary Data She et Package Outline Package Case Outline D A C B DO-41 DIM Min DO-41 Millimeters Max Min Inches Max A B C D --- 0.86 --- 0.034 --25.40 --- 5.20 --2.71 --1.000 --- 0.205 --0.107 This datasheet presents technical data of Tak Cheong’s Silicon Rectifier Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. is registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. August 2007 Release / A Page 2