MMSZ62VCW

SEMICONDUCTOR 500mW SOD-123 SURFACE MOUNT Green Product Flat Lead Surface Mount Plastic Package Zener Voltage Regulators Absolute Maximum Ratings Symbol PD TA = 25°C unless otherwise noted Parameter Power Dissipation Value Units 500 mW TSTG Storage Temperature Range -65 to +150 °C TOPR Operating Temperature Range -65 to +150 °C These ratings are limiting values above which the serviceability of the diode may be impaired. SOD-123 Flat Lead Specification Features:         Wide Zener Voltage Range Selection, 2.0V to 75V VZ Tolerance Selection of ±5% (C Series) Matte Tin(Sn) Lead Finish Anode Cathode Band Indicates Cathode ELECTRICAL SYMBOL RoHS Compliant Green EMC Weight: approx. 0.01g AEC-Q101 Qualified Electrical Characteristics Device Type Device Marking MMSZ2V0CW MMSZ2V2CW TA = 25°C unless otherwise noted VZ @ IZT (Volts) IZT (mA) ZZT @ IZT () Max IZK (mA) ZZK @ IZK () Max IR @ VR (A) Max VR (Volts) Min Nom Max 2V0Z 1.90 2.0 2.10 5 100 1 564 120 0.5 2V2Z 2.09 2.2 2.31 5 100 1 564 120 0.7 MMSZ2V4CW 2V4Z 2.28 2.4 2.52 5 100 1 564 45 1 MMSZ2V7CW 2V7Z 2.57 2.7 2.84 5 100 1 564 18 1 MMSZ3V0CW 3V0Z 2.85 3.0 3.15 5 100 1 564 9 1 MMSZ3V3CW 3V3Z 3.14 3.3 3.47 5 95 1 564 4.5 1 MMSZ3V6CW 3V6Z 3.42 3.6 3.78 5 90 1 564 4.5 1 MMSZ3V9CW 3V9Z 3.71 3.9 4.10 5 90 1 564 2.7 1 MMSZ4V3CW 4V3Z 4.09 4.3 4.52 5 90 1 564 2.7 1 MMSZ4V7CW 4V7Z 4.47 4.7 4.94 5 80 1 470 2.7 2 MMSZ5V1CW 5V1Z 4.85 5.1 5.36 5 60 1 451 1.8 2 MMSZ5V6CW 5V6Z 5.32 5.6 5.88 5 40 1 376 0.9 2 MMSZ6V2CW 6V2Z 5.89 6.2 6.51 5 10 1 141 2.7 4 MMSZ6V8CW 6V8Z 6.46 6.8 7.14 5 15 1 75 1.8 4 MMSZ7V5CW 7V5Z 7.11 7.5 7.86 5 15 1 75 0.9 5 MMSZ8V2CW 8V2Z 7.79 8.2 8.61 5 15 1 75 0.63 5 MMSZ9V1CW 9V1Z 8.65 9.1 9.56 5 15 1 94 0.45 6 MMSZ10VCW 10VZ 9.50 10 10.50 5 20 1 141 0.18 7 MMSZ11VCW 11VZ 10.45 11 11.55 5 20 1 141 0.09 8 MMSZ12VCW 12VZ 11.40 12 12.60 5 25 1 141 0.09 8 MMSZ13VCW 13VZ 12.35 13 13.65 5 30 1 160 0.09 8 Number: DB-083 April 2019, Revision F Page 1 MMSZ2V0CW through MMSZ75VCW ® TAK CHEONG ® TAK CHEONG SEMICONDUCTOR Electrical Characteristics TA = 25°C unless otherwise noted VZ @ IZT (Volts) IZT (mA) ZZT @ IZT () Max IZK (mA) ZZK @ IZK () Max IR @ VR (A) Max VR (Volts) 15.75 5 30 1 188 0.045 10.5 16 16.80 5 40 1 188 0.045 11.2 17.10 18 18.90 5 45 1 212 0.045 12.6 20VZ 19.00 20 21.00 5 55 1 212 0.045 14.0 22VZ 20.90 22 23.10 5 55 1 235 0.045 15.4 MMSZ24VCW 24VZ 22.80 24 25.20 5 70 1 235 0.045 16.8 MMSZ27VCW 27VZ 25.65 27 28.35 2 80 0.5 282 0.045 18.9 MMSZ30VCW 30VZ 28.50 30 31.50 2 80 0.5 282 0.045 21.0 MMSZ33VCW 33VZ 31.35 33 34.65 2 80 0.5 306 0.045 23.0 MMSZ36VCW 36VZ 34.20 36 37.80 2 90 0.5 329 0.045 25.2 MMSZ39VCW 39VZ 37.05 39 40.95 2 130 0.5 329 0.045 27.3 MMSZ43VCW 43VZ 40.85 43 45.15 2 150 0.5 353 0.045 30.1 MMSZ47VCW 47VZ 44.65 47 49.35 2 170 0.5 353 0.045 33.0 MMSZ51VCW 51VZ 48.45 51 53.55 2 180 0.5 376 0.045 35.7 MMSZ56VCW 56VZ 53.20 56 58.80 2 200 0.5 400 0.045 39.2 MMSZ62VCW 62VZ 58.90 62 65.10 2 215 0.5 423 0.045 43.4 MMSZ68VCW 68VZ 64.60 68 71.40 2 240 0.5 447 0.045 47.6 MMSZ75VCW 75VZ 71.25 75 78.75 2 255 0.5 470 0.045 52.5 Device Type Device Marking Min Nom Max MMSZ15VCW 15VZ 14.25 15 MMSZ16VCW 16VZ 15.20 MMSZ18VCW 18VZ MMSZ20VCW MMSZ22VCW VF Forward Voltage = 900mV Maximum @ IF = 10 mA for all types Notes: 1. 2. 3. 4. The Zener Voltage (VZ) is tested under pulse condition of 10mS. The device numbers listed have a standard tolerance on the nominal zener voltage of ±5%. For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter voltage tolerances, contact your nearest Tak Cheong Electronics representative. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK. Number: DB-083 April 2019, Revision F Page 2 ® TAK CHEONG SEMICONDUCTOR RATING AND CHARACTERISTIC CURVES Fig.2 EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE Fig.1 TYPICAL FORWARD VOLTAGE POWER PASSIPATION,mW 600 500 400 300 200 100 0 0 25 50 75 100 125 150 175 200 TEMPERATURE [℃ ] Fig.3 POWER DISSIPATION VS. AMBIENT TEMP. Fig.5 ZENER BREAKDOWN CHARACTERISTICS Fig.4 TYPICAL CAPACITANCE Fig.6 ZENER BREAKDOWN CHARACTERISTICS Number: DB-083 April 2019, Revision F Page 3 ® TAK CHEONG SEMICONDUCTOR Fig.7 TYPICAL LEAKGE CURRENT Flat Lead SOD-123 Package Outline Note: Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. Number: DB-083 April 2019, Revision F Page 4 TAK CHEONG ® DISC LA IMER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information previously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance. “AEC-Q101 QUALIFIED” Statement: Tak Cheong has the capabilities to conduct tests for product packages by grouping in selective bases. Tak Cheong reserves the rights for making necessary arrangement for the subject test due to the amount of time and resources involved. Number: DB-317 April 01, 2019 / A