®
TAK CHEONG
S EM ICOND UCTOR
1 Watt DO-41 Hermetically
Sealed Glass Zener Voltage Regulators
AXIAL LEAD DO41
Absolute Maximum Ratings
Parameter Storage Temperature Range
TA = 25°C unless otherwise noted Value -65 to +200 + 200 1.0 53.5 100 Units °C °C W att °C / W °C / W L 1N 47 xx T
L : Logo Device Code : TC1N47xxT VZ Tolerance (T) : A = ±5% C = ±2% DEVICE MARKING DIAGRAM
Maximum Junction Operating Temperature T otal Device Dissipation Thermal Resistance Junction to Lead Thermal Resistance Junction to Ambient
These ratings are limiting values above which the serviceability of the diode may be impaired.
Specification Features:
Zener Voltage Range 3.3 to 56 Volts Through-Hole Device Type Mounting Hermetically Sealed Glass Compression Bonded Construction All External Surfaces Are Corrosion Resistant And Leads A re Readily S olderable RoHS Compliant Solder Hot Dip Tin (Sn) T erminal Finish Cathode Indicated B y Polarity Band
ELECTRICAL SYMBOL Cathode Anode
Electrical Characteristics
Device Type TC1N4728A TC1N4729A TC1N4730A TC1N4731A TC1N4732A TC1N4733A TC1N4734A TC1N4735A TC1N4736A TC1N4737A TC1N4738A TC1N4739A TC1N4740A TC1N4741A TC1N4742A TC1N4743A TC1N4744A VZ @ IZT (Volts) Nominal 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15
TA = 25°C unless otherwise noted Z ZT @ IZT IZT IZK ( ) (mA) (mA) M ax 76 69 64 58 53 49 45 41 37 34 31 28 25 23 21 19 17 10 10 9 9 8 7 5 2 3.5 4 4.5 5 7 8 9 10 14 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25
ZZK @ IZK ( ) Max 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700
IR @ VR (A) Max 100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5
VR (Volts) 1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4
Number: DB-031 July 2010/ G Page 1
TC1N4728A through TC1N4758A
®
TAK CHEONG
S EM ICOND UCTOR Electrical Characteristics
Device Type
TC1N4745A TC1N4746A TC1N4747A TC1N4748A TC1N4749A TC1N4750A TC1N4751A TC1N4752A TC1N4753A TC1N4754A TC1N4755A TC1N4756A TC1N4757A TC1N4758A TA = 25°C unless otherwise noted
VZ @ IZT (Volts) Nominal
16 18 20 22 24 27 30 33 36 39 43 47 51 56
IZT (mA)
15.5 14 12.5 11.5 10.5 9.5 8.5 7.5 7 6.5 6 5.5 5 4.5
ZZT @ IZT () Max
16 20 22 23 25 35 40 45 50 60 70 80 95 110
IZK (mA)
0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
ZZK @ IZK ( ) Max
700 700 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000
IR @ VR (A) Max
5 5 5 5 5 5 5 5 5 5 5 5 5 5
VR (Volts)
12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6
VF F orward Voltage = 1.2 V Maximum @ IF = 2 00 mA for all types Notes: 1. TOLERANCE AND TYPE NUMBER DESIGNATION (V Z) The type numbers listed have a standard tolerance on the nominal zener voltage of ± 5%. Device tolerance of 2% is indicated by a “C” instead of an “A”. 2. SPECIALS AVAILABLE INCLUDE Nominal zener voltages between the voltages shown and tigh t er voltage, for detailed information on price, availability and delivery, contact you nearest Tak Cheong representative. 3. ZENER VOLTAGE (V Z) MEASUREMENT The zener voltage (V Z) is tested under pulse condition. 4. ZENER IMPEDANCE (Z Z) DERIVATION The zener impedance is derived from the 60 cycle AC voltage, which results when an AC current having an RMS value equal to 10% of t he DC zener current (I ZT or I ZK) is superimposed on IZT or I ZK.
Number: DB-031 July 2010/ G Page 2
®
TAK CHEONG
S EM ICOND UCTOR Typical Characteristics
1.0
1000
PD-Power Passip atio n [W]
0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 20 40 60 80 100 120 140 160 180 200
Total Capacitance [pF]
VR = 0V
f = 1MHz Ta = 25℃
100
VR = 2V VR = 5V VR = 20V
10
VR = 30V
1 0 5 10 15 20 25 30 35 40 45 50 55 60
Temperature [ ℃ ]
Figure 1. Power Dissipation vs Ambient Temperature
Valid provided leads at a distance of 0.8mm from case are kept at ambient temperature
VZ - Reverse Voltage [V]
F igure 2. Total Capacitance
Differential Zener Impedance [Ω]
1000
Iz=1mA
1000
Iz=2mA Iz=5mA Iz=10mA
Ta = 25℃
Forward Current [mA]
Ta = 25℃ 100
100
10
10
1
1
0.1 0 10 20 30 40 VZ - Reverse Voltage [V] 50 60
0.1 0 0.2 0.4 0.6 0.8 VF - Forw ard Voltage [V] 1 1.2
Figure 3. Differential Impedance vs. Zener Voltage
F igure 4. Forward Current vs. Forward Voltage
1000
100
Reverse Current [mA]
Reverse Current [mA]
100
10 Ta = 25℃ 1
10
Ta = 25℃
1
0.1
0.1 0 3 6 9 VZ - Reverse Voltage [V] 12 15
0.01 10 20 30 40 50 VZ - Reverse Voltage [V] 60 70
F igure 5. Reverse Current vs. Reverse Voltage
F igure 6. Reverse Current vs. Reverse Voltage
Number: DB-031 July 2010/ G Page 3
®
TAK CHEONG
S EM ICOND UCTOR Package Outline
Package Case Outline
D0-41 DO-41 DIM
Min
M illimeters
M ax Min
Inches
Max
A B C D
0.68
0.81
0.027
0.032
3.70
4.25
0.146
0.167
25.40
---
1.000
---
2.10
2.60
0.083
0.102
Notes: . 1. DO41 polarity denoted by cathode band.
Number: DB-031 July 2010/ G Page 4
TAK CHEONG
®
D ISC LA I MER NOTIC E
NOTICE
The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong’s sales office for further assistance.
Number: DB-100 April 14, 2008 / A
很抱歉,暂时无法提供与“TC1N4728A_10”相匹配的价格&库存,您可以联系我们找货
免费人工找货