Aluminum Electrolytic Capacitors
Snap-in capacitors
Series/Type:
B43601
Date:
April 1, 2014
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Snap-in capacitors 焊片式电容器
Long useful life and ultra compact - 85ºC
B43601
长寿命体积小型
长寿命体积小型 - 85ºC
Long-life grade capacitors
长寿命级电容器
Applications
应用
■ Frequency converters
■ 变频器
■ Uninterruptiple power supplies
■ 不间断电源
■ Switch mode power supplies in industrial and entertainment electronics
■ 工业和消费电子产品中的开关电源
Features
特点
■ Ultra compact
■ 体积小型
■ High reliability
■ 可靠性高
■ High ripple current capability
■ 耐高纹波电流能力
■ RoHS-compatible
■ 符合RoHS要求
■ Useful life of 10000h at 85 ºC
■ 85 ºC 10000h使用寿命
结构
■ Charge/discharge-proof, polar
■ 耐充放电,有极性
■ Aluminum case, fully insulated
■ 铝质外壳,整体绝缘
■ Minus pole marking on the insulating sleeve
■ 绝缘套管上标注负极
■ Overload protection by safety vent on the base
■ 底部安全阀过载保护
Page 2 of 9
Snap-in capacitors 焊片式电容器
Long useful life and ultra compact - 85ºC
B43601
长寿命体积小型
长寿命体积小型 - 85ºC
Specifications and characteristics in brief
规格性能参数一览表
Rated voltage VR
200…450 V DC
额定电压VR
Surge voltage VS
1.15 ∙ VR (for VR ≤ 250V DC)
浪涌电压VS
1.10 ∙ VR (for VR ≥ 400V DC)
VR ≤ 250V DC: -40 ºC…+105 ºC
Operating temperature
range
VR ≥ 400V DC: -25 ºC…+105 ºC
工作温度范围
Rated capacitance CR
82…2700 µF
20 ºC,120 Hz
额定电容量CR
Capacitance tolerance
±20% M
电容量公差
VR( V DC)
200…250
400…450
Dissipation factor(max.)
20ºC,120Hz.
tanδ
0.15
0.20
损耗正切角(最大值)
.
Leakage current Ileak
20 ºC,after 5 minutes
Ileak ≤ 0.3 ∙
∙
+4
漏电流 Ileak
μ
20 ºC,5分钟后
VR( V DC)
400...450
200…250
Low temperature stability
Z (-25 ºC)
低温稳定性
7
4
120 Hz
Z (+20 ºC)
(max impedance ratio)
Z (-40 ºC)
12
7
(最大阻抗比率)
Z (+20 ºC)
10000 h Requirements 要求:
Useful life
使用寿命
≤ ±20% of initial value 初始值的±20%
△C/C
(85 ºC,VR,IAC,R)
≤ 2 times initial specified limit 2倍初始规定值
tanδ
Ileak
≤ initial specified limit 初始规定值
After storage for 1000 h at 85 ºC, the capacitors shall meet the requirement of
useful life test after reforming process. After test: VR to be applied for 30 minutes,
Shelf life
24 to 48 hours before measurement.
储存寿命
85ºC高温贮存1000小时,并预处理后,电容器必须符合使用寿命测试中对其电性
能的要求。预处理方法:先加额定电压充电30分钟,恢复24至48小时后再测试。
VR( V DC) d(mm)
50Hz
120Hz
1kHz
10kHz
20kHz
22
0.75
1.00
1.52
1.68
1.69
25
0.75
1.00
1.52
1.68
1.69
200
30
0.80
1.00
1.25
1.31
1.32
35
0.85
1.00
1.14
1.17
1.17
22
0.75
1.00
1.52
1.68
1.69
25
0.75
1.00
1.52
1.68
1.69
250
Frequency multiplier for
30
0.80
1.00
1.25
1.31
1.32
rated ripple current
35
0.85
1.00
1.14
1.17
1.17
22
0.78
1.00
1.35
1.43
1.44
额定纹波电流的频率系数
25
0.78
1.00
1.35
1.43
1.44
400
30
0.80
1.00
1.25
1.31
1.32
35
0.80
1.00
1.25
1.31
1.32
22
0.78
1.00
1.35
1.43
1.44
25
0.78
1.00
1.35
1.43
1.44
450
30
0.78
1.00
1.35
1.43
1.44
35
0.80
1.00
1.25
1.31
1.32
Temperature multiplier for
+40 ºC
+55 ºC
+70 ºC
+85 ºC
rated ripple current
2.2
2.1
1.7
1.0
额定纹波电流的温度系数
Sectional specification
IEC 60384-4
分规范
Page 3 of 9
Snap-in capacitors 焊片式电容器
Long useful life and ultra compact - 85ºC
B43601
长寿命体积小型
长寿命体积小型 - 85ºC
Dimensional drawing
snap-in standard terminals (6.3±1) mm
snap-in short terminals (4.0±0.5) mm
digit 15 of part number = 0
digit 15 of part number = 7
snap-in 3 terminals terminals (4.0±0.5) mm
digit 15 of part number = 2
Page 4 of 9
Snap-in capacitors 焊片式电容器
Long useful life and ultra compact - 85ºC
Technical dates and ordering codes
VR
CR
ESRtyp
Zmax
Case
dimensions
120Hz
120 Hz
10 kHz
20 ºC d × l
20 °C
20 °C
mm
µF
mΩ
mΩ
V DC
22 x 25
200 330
270
400
22
x
30
390
240
340
22 x 35
470
190
280
25
x
25
470
190
280
22 x 35
560
160
240
25 x 30
560
160
240
22 x 40
680
130
190
25 x 35
680
130
190
30 x 25
680
130
190
22 x 50
820
110
160
25 x 40
820
110
160
30 x 30
820
110
160
25
x
45
1000
90
130
30 x 35
1000
90
130
35 x 25
1000
90
130
25 x 50
1200
80
110
30 x 40
1200
80
110
35 x 30
1200
80
110
30 x 45
1500
60
90
35 x 35
1500
60
90
30 x 50
1800
50
75
35
x
40
1800
50
75
35 x 45
2200
40
60
35
x
55
2700
30
50
22 x 25
250 270
310
460
22 x 30
330
250
370
25 x 25
330
250
370
22 x 35
390
220
320
25 x 30
390
220
320
22 x 40
470
180
260
25 x 30
470
180
260
22 x 45
560
150
220
25
x
35
560
150
220
30 x 25
560
150
220
22 x 50
680
120
180
25 x 40
680
120
180
30 x 30
680
120
180
35 x 25
680
120
180
* = Insulation feature
0 = PVC sleeve
6 = PET sleeve
B43601
长寿命体积小型
长寿命体积小型 - 85ºC
IAC,R
IAC,R
120 Hz 120 Hz
Ordering code
60 ºC
85 ºC
A
A
2.87
1.46 B43601A2337M0*#
3.27
1.66 B43601A2397M0*#
3.71
1.90 B43601A2477M0*#
3.53
1.80 B43601B2477M0*#
4.05
2.06 B43601A2567M0*#
4.03
2.05 B43601B2567M0*#
4.60
2.35 B43601A2687M0*#
4.59
2.34 B43601B2687M0*#
4.24
2.16 B43601C2687M0*#
5.33
2.71 B43601A2827M0*#
5.21
2.66 B43601B2827M0*#
4.86
2.47 B43601C2827M0*#
5.91
3.02 B43601A2108M0*#
5.56
2.83 B43601B2108M0*#
4.70
2.40 B43601C2108M0*#
6.63
3.38 B43601A2128M0*#
6.70
3.41 B43601B2128M0*#
5.72
2.91 B43601C2128M0*#
7.69
3.92 B43601A2158M0*#
6.61
3.38 B43601B2158M0*#
8.64
4.41 B43601A2188M0*#
7.48
3.81 B43601B2188M0*#
8.51
4.34 B43601A2228M0*#
9.89
5.04 B43601A2278M0*#
2.76
1.41 B43601E2277M0*#
3.18
1.62 B43601E2337M0*#
3.13
1.60 B43601F2337M0*#
3.58
1.82 B43601E2397M0*#
3.54
1.80 B43601F2397M0*#
4.06
2.07 B43601E2477M0*#
3.89
1.99 B43601F2477M0*#
4.55
2.32 B43601E2567M0*#
4.41
2.25 B43601F2567M0*#
4.03
2.05 B43601G2567M0*#
5.14
2.62 B43601E2687M0*#
5.01
2.55 B43601F2687M0*#
4.62
2.36 B43601G2687M0*#
4.00
2.04 B43601H2687M0*#
# = Terminal style
0 = snap-in standard terminals (6.3±1) mm
2 = snap-in 3 terminals (4.0±0.5) mm
7 = snap-in short terminals (4.0±0.5) mm
Page 5 of 9
Snap-in capacitors 焊片式电容器
Long useful life and ultra compact - 85ºC
Technical dates and ordering codes
VR
CR
ESRtyp
Zmax
Case
dimensions
120Hz
120 Hz
10 kHz
20 ºC d × l
20 °C
20 °C
mm
µF
mΩ
mΩ
V DC
25 x 45
250 820
100
150
30
x
35
820
100
150
35 x 30
820
100
150
25
x
55
1000
80
130
30 x 40
1000
80
130
35 x 30
1000
80
130
30 x 45
1200
70
110
35 x 35
1200
70
110
30 x 55
1500
60
85
35 x 40
1500
60
85
35 x 45
1800
50
70
35 x 55
2200
40
60
22
x
25
400 100
1030
1470
22 x 30
120
850
1220
22 x 30
150
680
980
25 x 25
150
680
980
22 x 35
180
570
820
25 x 30
180
570
820
22 x 40
220
460
670
25 x 35
220
460
670
30 x 25
220
460
670
22
x
45
270
380
550
25 x 40
270
380
550
30
x
30
270
380
550
25 x 45
330
310
450
30 x 35
330
310
450
35 x 25
330
310
450
25 x 50
390
260
380
30 x 35
390
260
380
35 x 30
390
260
380
25 x 55
470
220
320
30 x 40
470
220
320
35
x
35
470
220
320
30 x 45
560
180
270
35 x 35
560
180
270
30 x 55
680
150
220
35 x 40
680
150
220
35 x 50
820
120
180
35 x 55
1000
100
150
* = Insulation feature
0 = PVC sleeve
6 = PET sleeve
B43601
长寿命体积小型
长寿命体积小型 - 85ºC
IAC,R
IAC,R
120 Hz 120 Hz
Ordering code
60 ºC
85 ºC
A
A
5.65
2.88 B43601E2827M0*#
5.26
2.69 B43601F2827M0*#
4.87
2.48 B43601G2827M0*#
6.54
3.34 B43601E2108M0*#
6.40
3.25 B43601F2108M0*#
5.39
2.74 B43601G2108M0*#
7.20
3.67 B43601E2128M0*#
6.11
3.11 B43601F2128M0*#
8.45
4.31 B43601E2158M0*#
7.05
3.59 B43601F2158M0*#
7.94
4.05 B43601E2188M0*#
9.21
4.70 B43601E2228M0*#
1.73
0.89 B43601A9107M0*#
1.98
1.01 B43601A9127M0*#
2.21
1.12 B43601A9157M0*#
2.21
1.13 B43601B9157M0*#
2.51
1.28 B43601A9187M0*#
2.53
1.29 B43601B9187M0*#
2.86
1.46 B43601A9227M0*#
2.90
1.48 B43601B9227M0*#
2.77
1.41 B43601C9227M0*#
3.27
1.66 B43601A9277M0*#
3.32
1.69 B43601B9277M0*#
3.20
1.63 B43601C9277M0*#
3.77
1.93 B43601A9337M0*#
3.67
1.86 B43601B9337M0*#
3.29
1.68 B43601C9337M0*#
4.20
2.14 B43601A9397M0*#
3.99
2.03 B43601B9397M0*#
3.97
2.02 B43601C9397M0*#
4.72
2.40 B43601A9477M0*#
4.81
2.45 B43601B9477M0*#
4.51
2.30 B43601C9477M0*#
5.41
2.75 B43601A9567M0*#
4.92
2.51 B43601B9567M0*#
6.24
3.18 B43601A9687M0*#
5.60
2.85 B43601B9687M0*#
6.49
3.31 B43601A9827M0*#
7.32
3.74 B43601A9108M0*#
# = Terminal style
0 = snap-in standard terminals (6.3±1) mm
2 = snap-in 3 terminals (4.0±0.5) mm
7 = snap-in short terminals (4.0±0.5) mm
Page 6 of 9
Snap-in capacitors 焊片式电容器
Long useful life and ultra compact - 85ºC
Technical dates and ordering codes
VR
CR
ESRtyp
Zmax
Case
dimensions
120Hz
120 Hz
10 kHz
20 ºC d × l
20 °C
20 °C
mm
µF
mΩ
mΩ
V DC
22 x 25
450 82
1250
1860
22
x
30
100
1030
1520
22 x 30
120
850
1270
25
x
25
120
850
1270
22 x 35
150
680
1020
25 x 30
150
680
1020
22 x 40
180
570
850
25 x 35
180
570
850
30 x 25
180
570
850
22 x 50
220
460
700
25 x 40
220
460
700
30 x 30
220
460
700
35
x
25
220
460
700
25 x 45
270
380
570
30 x 35
270
380
570
35 x 30
270
380
570
25 x 50
330
310
470
30 x 40
330
310
470
35 x 30
330
310
470
30 x 45
390
260
390
35 x 35
390
260
390
30
x
50
470
220
330
35 x 40
470
220
330
30
x
55
560
180
280
35 x 45
560
180
280
35 x 50
680
150
230
* = Insulation feature
0 = PVC sleeve
6 = PET sleeve
B43601
长寿命体积小型
长寿命体积小型 - 85ºC
IAC,R
IAC,R
120 Hz 120 Hz
Ordering code
60 ºC
85 ºC
A
A
1.63
0.82 B43601A5826M0*#
1.87
0.95 B43601A5107M0*#
2.05
1.04 B43601A5127M0*#
2.05
1.04 B43601B5127M0*#
2.38
1.21 B43601A5157M0*#
2.39
1.22 B43601B5157M0*#
2.69
1.37 B43601A5187M0*#
2.71
1.38 B43601B5187M0*#
2.69
1.37 B43601C5187M0*#
3.12
1.59 B43601A5227M0*#
3.09
1.58 B43601B5227M0*#
3.10
1.58 B43601C5227M0*#
2.91
1.48 B43601D5227M0*#
3.52
1.79 B43601A5277M0*#
3.56
1.81 B43601B5277M0*#
3.58
1.82 B43601C5277M0*#
4.00
2.04 B43601A5337M0*#
4.33
2.20 B43601B5337M0*#
3.97
2.02 B43601C5337M0*#
4.84
2.46 B43601A5397M0*#
4.46
2.28 B43601B5397M0*#
5.45
2.78 B43601A5477M0*#
5.06
2.58 B43601B5477M0*#
6.09
3.10 B43601A5567M0*#
5.68
2.89 B43601B5567M0*#
6.41
3.27 B43601A5687M0*#
# = Terminal style
0 = snap-in standard terminals (6.3±1) mm
2 = snap-in 3 terminals (4.0±0.5) mm
7 = snap-in short terminals (4.0±0.5) mm
Page 7 of 9
Bar code label and marking of the capacitor 条形码标签和电容器标签
Below is an example of bar code label on package:
以下为包装箱上条形码标签示例:
Brand 品牌
B43310B9688M001
(1P) Ordering code
(9K) Product order number
(D) Date code (yywwdd)
订购代码
订单号
日期代码(年月日)
(T) Batch number
(Q) Quantity
批号
数量
The two examples below shows how the capacitor sleeve are marked according to case height:
以下两个示例说明不同壳体高度电容器套管上的标签内容:
Case height
壳体高度
25mm
B43231-A9337-M
330µF (M)
400V25/085/56
MM.JJ
EPCOS
>25mm
品牌
Part number (ordering code)
B43231-A9337-M
330µF (M)
400V- Rated capacitance, tolerance, rated voltage,
25/085/56
MM.JJ Climatic category, month and year of production
EPCOS
20mm
EP CO S
Brand
B43231-A9337-M
330µF (M)
400V25/085/56
MM.JJ
料号(订购代码)
额定电容、容差、额定电压
气候分类、月.年(生产日期)
Brand
品牌
Part number (ordering code)
料号(订购代码)
Rated capacitance, tolerance, rated voltage,
Climatic category
额定电容、容差、额定电压
气候分类
Month and year of production
月.年(生产日期)
Brand
Part number (ordering code)
Rated capacitance, tolerance, rated voltage,
Climatic category
品牌
料号(订购代码)
额定电容、容差、额定电压
气候分类
Month and year of production
月.年(生产日期)
The climatic category is specified according to IEC 60068–1. If there is not enough space on the case, the following
codes may be used:
气候类别符合IEC 60068–1。如果壳体上没有足够空间,可使用以下代码:
E.g.: 40/085/56, in coded form, would read GPF 例如:40/085/56的代码形式为GPF
1st letter (lower category temperature) 首字母(下限类别温度)
Code letter 字母代码
F
G
H
Temperature 温度(°C)
-55
-40
-25
2nd letter (upper category temperature) 第二字母(上限类别温度)
Code letter 代码字母
K
M
P
S
U
Temperature 温度(°C)
+125
+105(+100)
+85
+70
+60
3rd letter (humidity) 第三字母(湿度)
Letter F: withstands IEC60068-2-78 Cab (damp heat, steady state), test duration 56 days.
字母F:经受IEC 60068-2-78试验箱(湿热、恒稳态),试验周期56天。
Page 8 of 9
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for certain areas of
application. These statements are based on our knowledge of typical requirements that are often placed on
our products in the areas of application concerned. We nevertheless expressly point out that such statements
cannot be regarded as binding statements about the suitability of our products for a particular
customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less
familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the product
specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure before the
end of their usual service life cannot be completely ruled out in the current state of the art, even if they
are operated as specified. In customer applications requiring a very high level of operational safety and
especially in customer applications in which the malfunction or failure of an electronic component could
endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this publication may
contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as
hazardous). Useful information on this will be found in our Material Data Sheets on the Internet
(www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this publication may
change from time to time. The same is true of the corresponding product specifications. Please check
therefore to what extent product descriptions and specifications contained in this publication are still applicable
before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot
guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the foregoing for
customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “
General Terms of Delivery for Products and Services in the Electrical Industry” published by the
German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic,
DSSP, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap,
PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in
Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 9 of 9