HPL505032F1080MRD3P

I N D U C T O R S Inductors for power circuits Wound ferrite HPL series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 HPL505032F1 type FEATURES Achieved high-reliability inductors without joints Adoption of ferrites made of High BS material and low-RDC by frame forming Magnetic flux cancellation realizes low EMI Operating temperature range: –55 to +155°C (including self-temperature rise) Compliant with AEC-Q200 APPLICATION ADAS - Level5 for Camera PART NUMBER CONSTRUCTION HPL 505032 F1 060 M RD3P Series name LxWxH dimensions 5.0x5.0x3.2 mm Internal code Inductance (nH) Inductance tolerance Internal code CHARACTERISTICS SPECIFICATION TABLE Measuring DC resistance Rated current frequency Isat 2 Isat 1 (nH) Tolerance (kHz) (m )max. (m )typ. (A)25deg.C (A)125deg.C (A)25deg.C 60 ±20% 100 0.77 0.7 52 44.2 54 70 ±20% 100 0.77 0.7 50 42.5 52 80 ±20% 100 0.77 0.7 39 33.2 42 Rated current: smaller value of either Isat or Itemp. Isat 1: When based on the inductance change rate (20% below the nominal value) Isat 2: When based on the inductance change rate (30% below the nominal value) Itemp: When based on the temperature increase (temperature increase of 40°C by self heating) L Part No. Itemp (A)125deg.C (A)typ. 45.9 34 44.2 34 35.7 34 HPL505032F1060MRD3P HPL505032F1070MRD3P HPL505032F1080MRD3P Measurement equipment Measurement item Product No. L 4294A DC resistance 3541 Rated current Isat 3260B ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies HIOKI Wayne Kerr Electronics Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20210108 inductor_automotive_power_hpl505032f1_en.fm I N D U C T O R S HPL505032F1 type L FREQUENCY CHARACTERISTICS 200 Inductance(nH) 150 100 080M 070M 060M 50 0 0.1 1 10 100 Frequency(MHz) Measurement equipment Product No. Manufacturer 4294A Keysight Technologies ＊ Equivalent measurement equipment may be used. L VS. DC BIAS CHARACTERISTICS 90 080M 80 070M 70 060M Inductance(nH) 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 DC current(A) Measurement equipment Product No. Manufacturer ZM2376+DC30108+SEN58405 NF ＊ Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20210108 inductor_automotive_power_hpl505032f1_en.fm I N D U C T O R S HPL505032F1 type PACKAGING STYLE (0.88) SHAPE & DIMENSIONS 1 REEL DIMENSIONS 2.0±0.5 2.0±0.5 (3.38) 3 5.0±0.2 1 3 2 3.2max. 5.0±0.2 ø100 (0.88) 2 (0.4) (4.2) (1.0) (0.4) Dimensions in mm ø17.5±0.5 16.4+2/-0 ø21.0±0.8 22.4 or less ø330 RECOMMENDED LAND PATTERN Dimensions in mm 0.3 2.0±0.1 4.0±0.1 Sprocket hole 3.7 B 1.0 12.0±0.2 2 1.0 Dimensions in mm K 5.5±0.1 1.5 +0.1 –0 0.4±0.05 0.9 0.9 1.6 3 1.75±0.1 1.6 TAPE DIMENSIONS 1 Cavity A 8.0±0.1 Dimensions in mm CIRCUIT DIAGRAM Type HPL505032F1 (1) A (5.3) B (5.3) K (3.3) (3) PACKAGE QUANTITY (2) Package quantity TEMPERATURE RANGE, INDIVIDUAL WEIGHT RECOMMENDED REFLOW PROFILE Preheating Soldering 1000 pcs/reel Natural cooling Peak Operating Storage Individual temperature range temperature range weight –55 to +155 °C –55 to +155 °C 0.33 g  Operating temperature range includes self-temperature rise.  The storage temperature range is for after the assembly. 245°C Temperature 230°C 230°C 180°C 5s max. 150°C 60 to 120s 10 to 30s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20210108 inductor_automotive_power_hpl505032f1_en.fm I N D U C T O R S REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. Do not use products that have received any excessive mechanical shock such as by being dropped. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Do not expose the products to magnets or magnetic fields. The performance of the product may deteriorate if coating materials are used, thus please assess the situation beforehand by taking this factor into consideration. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or general electronic equipment including the said product is intended to be used in the usual operation and usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20210108 inductor_automotive_power_hpl505032f1_en.fm