E M C
C o m p o n e n t s
Common mode filters
Automobile Ultra-high-speed differential signal line
KCZ-DH series
RoHS
REACH
SVHC-Free
Cl
Br
Pb
Halogen
Free
Lead
Free
AEC-Q200
KCZ1210DH type
FEATURES
Multilayer common mode filter for ultra-high speed differential signal lines that supports 125°C.
Guide electric property resin absorbs external stress, and mechanical stress, resistance force to thermal shock is improved.
Since the cutoff frequency of the differential mode supports up to 6.0 GHz, it is ideal for high-speed differential transmission lines such
as USB3.0.
Differential mode cutoff frequency is 100 typ.
Operating temperature range: –55 to +125°C
APPLICATION
Differential transmission interfaces such as cameras, displays, infotainment, etc. (LVDS, GVIF, USB3.0 etc.)
PART NUMBER CONSTRUCTION
KCZ
1210
DH
500
HR
T
D25
Series name
L×W×T dimensions
1.25×1.0×0.5 mm
Product
internal code
Impedance
() at 100MHz
Category
Packaging style
Internal code
CHARACTERISTICS SPECIFICATION TABLE
Common mode impedance
DC resistance
[100MHz]
[1 line]
( )
12
45
80
Tolerance
±5
±25%
±25%
( )max.
1.5
2.5
3
Rated current
Rated voltage
Insulation
resistance
(mA)max.
100
100
100
(V)max.
5
5
5
(M )min.
10
10
10
Part No.
KCZ1210DH120HRTD25
KCZ1210DH500HRTD25
KCZ1210DH800HRTD25
Impedance ( ) at 100MHz in PART NUMBER CONSTRUCTION is a reference value.
Measurement equipment
Measurement item
Product No.
Common mode impedance
E4991A+16192A
DC resistance
Type-755611
Insulation resistance
4339B
* Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Yokogawa
Keysight Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20221021
cmf_automotive_signal_kcz1210dh_en.fm
E M C
C o m p o n e n t s
KCZ1210DH type
IMPEDANCE VS. FREQUENCY CHARACTERISTICS
10000
800 Common mode
1000
Impedance ()
500 Common mode
120 Common mode
100
800 Differential mode
10
500 Differential mode
120 Differential mode
1
1
10
100
Frequency (MHz)
1000
10000
Measurement equipment
Product No.
Manufacturer
E4991A+16192A
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20221021
cmf_automotive_signal_kcz1210dh_en.fm
E M C
C o m p o n e n t s
KCZ1210DH type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
1.0±0.15
0.5±0.1
ø60min.
1.25±0.15
0.2±0.15
2.0±0.5
0.35±0.05
1.0
Dimensions in mm
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
RECOMMENDED LAND PATTERN
14.4max.
ø180±2.0
0.30 to 0.35
0.5
Dimensions in mm
2.0±0.05
4.0±0.1
3.5±0.05
1.5 +0.1
–0
8.0±0.3
Sprocket
hole
0.25±0.05
1.75±0.1
0.7 to 0.75
TAPE DIMENSIONS
B
0.55
Dimensions in mm
K
A
4
Dimensions in mm
3
Type
KCZ1210DH
A
1.17±0.03
160min.
1
Cavity
4.0±0.1
CIRCUIT DIAGRAM
Taping
B
1.40±0.03
K
0.63±0.03
200min.
2
• No polarity
300min.
Drawing direction
RECOMMENDED REFLOW PROFILE
Dimensions in mm
Preheating
Soldering
Natural
cooling
Peak
PACKAGE QUANTITY
Package quantity
4,000 pcs/reel
250 to 260°C
Temperature
230°C
230°C
180°C
10s max.
150°C
60 to 120s
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating
Storage
temperature range
temperature range
–55 to +125 °C
–55 to +125 °C
The storage temperature range is for after the assembly.
Individual
weight
3.0 mg
30 to 60s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20221021
cmf_automotive_signal_kcz1210dh_en.fm
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is within 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20221021
cmf_automotive_signal_kcz1210dh_en.fm
很抱歉,暂时无法提供与“KCZ1210DH120HRTD25”相匹配的价格&库存,您可以联系我们找货
免费人工找货