E M C
C o m p o n e n t s
3-terminal filters
Signal line
MEM series
RoHS
REACH
SVHC-Free
Cl
Br
Pb
Halogen
Free
Lead
Free
MEM2012SC type
FEATURES
Multilayer chip EMC filter.
Monolithic structure makes it highly reliable.
Closed magnetic circuit structure makes it possible to achieve high-density mounting without crosstalk.
Has sharp attenuation characteristics with excellent EMC suppression.
Wide range of products compatible with passing frequencies and attenuating frequencies.
T-type circuit is used.
Compatible with 1A current.
Operating temperature range: –40 to +85°C
APPLICATION
Noise removal from signal lines of data terminals, digital cameras, computers, game machines, flat TVs, etc.
Application guides: Smart phones/tablets
PART NUMBER CONSTRUCTION
MEM
2012
SC
100
T
001
Series name
L×W×T dimensions
2.0×1.25×0.8mm
Product internal
code
Capacitance
(pF) at 1MHz
Packaging style
Internal code
CHARACTERISTICS SPECIFICATION TABLE
Capacitance
Tolerance
Rated voltage
(%)
(V)max.
(pF)
10
±30
12
22
±30
12
47
±30
12
100
±30
12
150
±30
12
Measuring frequency: 1(MHz), measuring voltage: 1(V)
Rated current
(A)max.
1
1
1
1
1
DC resistance
[Terminal No.1 to 3]
( )max.
0.15
0.15
0.15
0.15
0.15
Part No.
MEM2012SC100T001
MEM2012SC220T001
MEM2012SC470T001
MEM2012SC101T001
MEM2012SC151T001
Measurement equipment
Measurement item
Product No.
Capacitance
4294A
Frequency characteristics
N5230C
* Equivalent measurement equipment may be used.
Manufacturer
Keysight Technologies
Keysight Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20190207
3tf_commercial_signal_mem2012sc_en.fm
E M C
C o m p o n e n t s
MEM2012SC type
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
Insertion loss (dB)
10
SC151
20
SC101
SC100
SC220
SC470
30
40
50
60
1
10
100
Frequency (MHz)
1000
10000
Measurement equipment
Product No.
Manufacturer
N5230C
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20190207
3tf_commercial_signal_mem2012sc_en.fm
E M C
C o m p o n e n t s
MEM2012SC type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
2±0.2
GND
5
NC
4
1
IN/OUT
2
GND
3
OUT/IN
E
2.0±0.5
0.2min.
0.8+0.15, –0.2
0.2min.
ø60min.
0.1min.
1.25±0.2
NC
6
1.0
0.4±0.15
0.4±0.15
0.4±0.15
Dimensions in mm
8.4 +2.0
–0.0
ø13±0.2
ø21±0.8
14.4max.
ø180±2.0
RECOMMENDED LAND PATTERN
Dimensions in mm
2.0±0.05
4.0±0.1
8.0±0.3
1.5 +0.1
–0
0.4
B
1.2
2.6
Dimensions in mm
A
K
3.5±0.05
Sprocket
hole
1.75±0.1
0.5
2.2
TAPE DIMENSIONS
Cavity
4.0±0.1
Dimensions in mm
CIRCUIT DIAGRAM
Type
MEM2012SC
A
1.55±0.20
160min.
GND
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Taping
B
2.30±0.20
K
1.10max.
200min.
300min.
Drawing direction
Natural
cooling
Peak
Dimensions in mm
250 to 260°C
PACKAGE QUANTITY
Temperature
230°C
230°C
10s max.
60 to 120s
4,000 pcs/reel
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
180°C
150°C
Package quantity
30 to 60s
Operating
Storage
temperature range
temperature range
–40 to +85 °C
–40 to +85 °C
The storage temperature range is for after the assembly.
Individual
weight
8 mg
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20190207
3tf_commercial_signal_mem2012sc_en.fm
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20190207
3tf_commercial_signal_mem2012sc_en.fm
很抱歉,暂时无法提供与“MEM2012SC470T001”相匹配的价格&库存,您可以联系我们找货
免费人工找货