MEM2012T101RT0S1

(1/2) 3-terminal Filters(SMD) For Signal Line Conformity to RoHS Directive MEM Series MEM2012T-S1 Type FEATURES • Multilayer chip EMC filter utilizing a T-type circuit. • Entirely monolithic structure results in high reliability. • Due to closed magnetic circuit architecture, high-density installation becomes possible, and crosstalk generation is prevented. • Steep attenuation characteristic plot. Highly effective noise suppression. • Covers a wide range of frequencies. • MEM2012T is a coil type EMC filter. • This product is low profile type with the height of 0.85mm. PRODUCT IDENTIFICATION APPLICATIONS Computer and computer peripherals, VCRs, TVs, car audio equipment, printers, game machines, etc. Packaging style Taping MEM 2012 T 25R0 T (1) (2) (3) (4) (5) (1)Series name (2)Dimensions L× W (3)T-type circuit (4)Cutoff freguency 25R0: 25MHz (5)Packaging style T:Taping PACKAGING STYLE AND QUANTITIES Quantity 4000 pieces/reel TEMPERATURE RANGES Operating/Storage –40 to +85°C SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN 1 IN/OUT 2 GND 0.5 0.5 1 1.25±0.2 0.1min. 1 2±0.2 GND 4 Marking 0.2 3 OUT/IN 0.85±0.15 0.2min 0.2min 0.2 0.7 0.7 0.8 0.8 1.5 1.5 Dimensions in mm 0.4±0.15 0.4±0.15 0.4±0.15 ELECTRICAL CHARACTERISTICS Part No. MEM2012T25R0T0S1 MEM2012T35R0T0S1 MEM2012T50R0T0S1 MEM2012T101RT0S1 MEM2012T201RT0S1 Cutoff frequency (MHz) 25 35 50 100 200 Insertion loss (dB)min. 30[70MHz to 2GHz] 30[90MHz to 2GHz] 30[200MHz to 2GHz] 30[400MHz to 2GHz] 30[530MHz to 2.5GHz] Rated voltage Edc(V)max. 10 10 10 10 10 Rated current (mA)max. 100 100 100 250 250 • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Please contact our Sales office when your application are considered the following: The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) • All specifications are subject to change without notice. 002-03 / 20061022 / e9616_mem_t_s1.fm (2/2) TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS MEASURING CIRCUIT 1 –20 SG –30 10 V.V. 2 GND MEM2012T201RT0S1 –40 MEM2012T101RT0S1 MEM2012T50R0T0S1 –50 MEM2012T35R0T0S1 MEM2012T25R0T0S1 –60 1 50Ω Attenuation(dB) –10 –70 3 50Ω 0 100 Frequency (MHz) 1000 10000 RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING 10s max. 250 to 260˚C Natural cooling 230˚C 180˚C 150˚C Preheating 60 to 120s Soldering 30 to 60s Time(s) • All specifications are subject to change without notice. 002-03 / 20061022 / e9616_mem_t_s1.fm