MPZ1005S330HT000

E M C C o m p o n e n t s Chip beads For power line Large current/Low DC resistance type MPZ-H series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MPZ1005-H type FEATURES Noise reduction solution for power line. This product is a low resistance of more than 30% than 「-C」series standards. Reduced from the -C on the standard series power loss in circuits. Downsizing of 1608 shape easy due to the 30% or more improvement compared to the conventional power beads rated current. Operating temperature range: –55 to +125°C APPLICATION Noise countermeasures for power lines of mobile devices such as smartphones and tablet terminals, base stations, and wearable devices Noise countermeasures for power lines of information devices such as PCs, servers, STBs, and routers Noise countermeasures for industrial equipment such as smart grids and power lines for robots, etc. PART NUMBER CONSTRUCTION MPZ 1005 S 330 H T 000 Series name L×W×T dimensions 1.0×0.5x0.5 mm Material name Impedance () at 100MHz Characteristic type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance Rated current DC resistance Part No. [100MHz] ( ) Tolerance ( )max. (A)max. 18 ±35% 0.010 4.0 MPZ1005S180HT000 33 ±25% 0.022 3.0 MPZ1005S330HT000 90 ±25% 0.038 2.3 MPZ1005S900HT000 120 ±25% 0.055 2.0 MPZ1005S121HT000 180 ±25% 0.085 1.6 MPZ1005S181HT000 220 ±25% 0.095 1.5 MPZ1005S221HT000  Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment Measurement item Product No. Impedance 4991A+16192A DC resistance Type-755611 ＊ Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Rated current vs. temperature characteristics (derating) 5 Rated current (A) 4 3 2 1 S180H S330H S900H S121H S181H S221H 0 –55 –35 –15 5 25 45 65 Temperature (°C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20220203 beads_commercial_power_mpz1005-h_en.fm E M C C o m p o n e n t s MPZ1005-H type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MPZ1005-H series 350 300 S221H Impedance (Ω) 250 200 S181H 150 S121H 100 S900H 50 0 S330H S180H 1 10 100 1000 Frequency (MHz) 10000 Z, X, R VS. FREQUENCY CHARACTERISTICS 30 60 25 50 Z 20 15 R 10 X 5 0 1 10 100 1000 Frequency (MHz) R 30 20 X 10 10 100 1000 Frequency (MHz) 140 120 100 80 60 40 20 0 10000 300 Z R X 1 10 100 1000 Frequency (MHz) 10000 250 Z 200 R 150 100 X 50 0 1 10 Z R X 1 10 100 1000 Frequency (MHz) 10000 MPZ1005S221HT000 Impedance (Ω) 180 160 140 120 100 80 60 40 20 0 40 MPZ1005S181HT000 Impedance (Ω) Impedance (Ω) MPZ1005S121HT000 Z 0 1 10000 MPZ1005S900HT000 Impedance (Ω) MPZ1005S330HT000 Impedance (Ω) Impedance (Ω) MPZ1005S180HT000 100 1000 Frequency (MHz) 10000 350 300 250 200 150 100 50 0 Z R X 1 10 100 1000 Frequency (MHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 10000 (2/4) 20220203 beads_commercial_power_mpz1005-h_en.fm E M C C o m p o n e n t s MPZ1005-H type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 1±0.05 0.5±0.05 ø60min. 0.5±0.05 2.0±0.5 1.0 0.1min. Dimensions in mm 8.4 +2.0 –0.0 ø13±0.2 ø21±0.8 14.4max. ø180±2.0 RECOMMENDED LAND PATTERN Dimensions in mm 4.0±0.1 3.5±0.05 2.0±0.05 B 8.0±0.3 1.5 +0.1 –0 1.75±0.1 Sprocket hole d 0.5 TAPE DIMENSIONS 0.5 0.4 0.5 K A Solder Resist Cavity 2.0±0.05 Dimensions in mm Pattern Rated current (A) 1.5max. 2.3max. 3.0max. 4.0max. Pad thickness & d 18um 35um 70um 0.5 0.5 0.5 1.2 0.7 0.5 2.4 1.2 0.5 5.0 3.0 1.0 Type MPZ1005-H 160min. Dimensions in mm RECOMMENDED REFLOW PROFILE Preheating Soldering Temperature K 0.8max. 200min. 300min. Natural cooling Dimensions in mm PACKAGE QUANTITY Package quantity 230°C 10s B 1.15±0.1 Drawing direction 250 to 260°C 180°C 60 to 120s Taping Peak 230°C 150°C A 0.65±0.1 10,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range –55 to +125°C –55 to +125°C  The storage temperature range is for after the assembly. Individual weight 1 mg 30 to 60s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20220203 beads_commercial_power_mpz1005-h_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment   (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20220203 beads_commercial_power_mpz1005-h_en.fm